Who could benefit from mesh Wi-Fi across multiple floors?

Listener with weak Wi-Fi upstairs

You want to download an audiobook in the bedroom or attic, but the connection drops out there. Where you position the next Wi-Fi point, and how it connects to the others, matter more than the advertised top speed alone. The Dutch Consumers’ Association advises taking obstacles and the connection between wireless points into account.

Homeowner with Ethernet between floors

You have Ethernet between floors and want Wi-Fi where you listen. Choose a system that can connect its points using that cable; ASUS and TP-Link describe Ethernet backhaul for specific models.

Homeowner without a network cable

You can’t run Ethernet upstairs, so you need to decide whether wireless points can reach each other reliably enough. If obstacles make this difficult, powerline may be an alternative worth exploring; TP-Link describes this type of connection for the Deco PX50.

What should you look for in mesh Wi-Fi for audiobook downloads?

First, check where the connection drops and how the mesh points can connect to each other. The highest advertised Wi-Fi speed isn’t necessarily the deciding factor for downloading an audiobook.

What to consider What to look for Who it matters most to
Coverage where you listen Map out the areas with weak signal, and don’t position a point somewhere it can barely get reception itself. If you download in the attic or a bedroom, you’ll want a usable connection there. Around 40% of consumers prioritise coverage on that floor.
Connection between points Check whether Ethernet is available. If not, consider where to position wireless points or test powerline in your home. If you can’t run a cable, you’ll want to know whether the points can reach each other wirelessly or whether powerline might work. Around 30% of consumers prioritise the connection between points.
Equipment you need Choose the number of units based on the problem areas. Match the Wi-Fi generation to your devices and how you use them. If you only want to buy the points and features you need, look for a solution that’s right-sized for your home. Around 20% of consumers value simplicity and suitable equipment above all.
Management and security Check how to update the firmware and manage security settings. Also consider the energy use of points that stay on all the time. If you want to manage your network over the long term, factor in updates, security and energy use. Around 10% of consumers make management and security their top priority.

Which mistakes should you avoid with mesh Wi-Fi across multiple floors?

  • Assuming the advertised coverage guarantees Wi-Fi in the attic

    Positioning and obstacles both affect how well wireless points can reach each other. An advertised coverage area doesn’t prove that the signal will reach every floor of a particular home reliably.

    Map out the areas with weak Wi-Fi, then test the connection and download on the floor where you listen once the system is set up.

  • Choosing based only on high Wi-Fi speed or a newer Wi-Fi generation

    The Wi-Fi generation alone won’t tell you whether the connection will be good where you listen. You don’t automatically need a high advertised top speed for this purpose.

    Prioritise usable coverage and a good connection between points over the highest advertised speed.

  • Assuming powerline guarantees a connection through every floor

    TP-Link says the Deco PX50 uses electrical wiring to connect points. This doesn’t guarantee a particular connection in your home.

    After installation, test the connection and download on the floors where you plan to use the system.

  • Confusing the manufacturer’s warranty with your statutory rights

    In the Netherlands, there’s no fixed period for the statutory guarantee, which is separate from any additional manufacturer’s warranty. The Dutch Government explains the difference.

    Keep your proof of purchase and contact the seller if the product is faulty.

Which mesh Wi-Fi brands are worth considering?

TP-Link

The Deco X50 offers dual-band Wi-Fi 6 and optional Ethernet backhaul. The separate Deco PX50 combines Wi-Fi with G.hn powerline for homes where wireless connections between points are tricky.

  • TP-Link says the X50 has three gigabit ports per unit and supports optional Ethernet backhaul.
  • The PX50 also uses electrical wiring to connect points. Advertised speeds and coverage areas don’t show how well the system will perform on every floor of your home.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh system whose points can connect via Ethernet if suitable connections are available.

  • ASUS confirms that the XD5 supports Ethernet backhaul when Ethernet ports are available.
  • ASUS says you need a compatible Wi-Fi 6 device to benefit from Wi-Fi 6. The manufacturer also notes that 160 MHz on 5 GHz may be restricted in some regions.

NETGEAR

The Orbi RBK763S is a tri-band Wi-Fi 6 package with a router and two satellites, designed for households where several devices need to be connected at once.

  • NETGEAR lists a dedicated connection between the router and satellites, as well as seven gigabit ports, for this package.
  • The advertised coverage and speed don’t predict how well the connection will work through the floors of a particular home.

KPN

SuperWifi is a provider-specific mesh option worth exploring if you already have KPN internet and compatible KPN equipment.

  • KPN says that SuperWifi points can also be connected by cable.
  • According to KPN, how you connect the first point depends on the modem you use, so don’t assume that installation will be the same for every package or modem.

Joybuy products for mesh Wi-Fi across multiple floors

This selection of Joybuy products includes mesh systems with multiple points and, depending on the model, wired, wireless or powerline connections between those points.

TP-Link Deco BE68 (2-pack)

TP-Link Deco BE68 (2-pack)

A two-point mesh system; the product description mentions both wired and wireless backhaul.

Tri-band Wi-Fi 7; multi-link operation.

Joybuy
TP-Link Deco E4 (3-pack)

TP-Link Deco E4 (3-pack)

The product description mentions three units working together as a mesh network, plus an app for setup and help choosing where to place them.

Dual-band Wi-Fi 5 (2.4 GHz/5 GHz); Ethernet ports with a maximum speed of 100 Mbps.

Joybuy
TP-Link Deco M4 (3-pack)

TP-Link Deco M4 (3-pack)

The product description mentions three units that form a single wireless network; the Deco app helps you set them up and choose where to place them.

Dual-band Wi-Fi 5 (2.4 GHz/5 GHz); two Ethernet ports per unit.

Joybuy
TP-Link Deco X50 (3-pack)

TP-Link Deco X50 (3-pack)

The product description mentions optional Ethernet backhaul between mesh points, which is useful if you have Ethernet between floors.

Dual-band Wi-Fi 6; three gigabit ports per unit.

Joybuy
Huawei eKit OptiX FG736 BE3600

Huawei eKit OptiX FG736 BE3600

The product description mentions support for multiple mesh units with one SSID and seamless roaming between locations.

Dual-band Wi-Fi 7 mesh router.

Joybuy

Frequently asked questions about mesh Wi-Fi and audiobooks

Where should you position a wireless mesh point for the floor where you download?

Don’t automatically put the point where reception is worst. The Dutch Consumers’ Association advises taking obstacles and the connection between points into account. Choose a spot somewhere in between, then check the connection indicator and try a download on the floor you want to cover.

Do you need a permit or registration to use home Wi-Fi in the Netherlands?

You don’t need a permit or registration to use designated licence-exempt Wi-Fi frequencies in accordance with their terms of use. The Dutch Authority for Digital Infrastructure notes that shared frequencies don’t guarantee an interference-free connection.

What should you check when buying a mesh system for use in the Netherlands?

Check the CE marking and the product information for the radio equipment being sold. Compliance must be demonstrable for the specific product; a statement on a product page isn’t, by itself, an independent assessment.

What if the system doesn’t work properly at home or develops a fault?

For online purchases by consumers, you’ll generally have a statutory cooling-off period of up to 14 days after delivery, subject to legal exceptions; the Dutch Authority for Consumers and Markets explains how this works. Separately, you’re entitled to a product that meets legal standards in the Netherlands. There’s no fixed period for the statutory guarantee, and the seller is your point of contact if something goes wrong.