Language learner with a weak signal in the attic
If you take a lesson upstairs, first check where a Wi-Fi point can still connect well to the rest of the network. The Consumentenbond advises keeping obstacles between Wi-Fi points to a minimum.
First, check whether a Wi-Fi point on the landing still has a usable connection: adding another point in the attic will do little if its connection to the rest of the network is already weak. The Consumentenbond recommends two points as a starting point for two floors, and three for three floors, but this is no guarantee for every home. If you can run an Ethernet cable to the attic, compare systems with Ethernet backhaul and check how they work with your existing router.
If you take a lesson upstairs, first check where a Wi-Fi point can still connect well to the rest of the network. The Consumentenbond advises keeping obstacles between Wi-Fi points to a minimum.
If you can run an Ethernet cable upstairs, compare systems that support Ethernet backhaul. TP-Link and ASUS describe this option for specific mesh models.
If other people at home use the network while you take a lesson, consider the setup, connections and how it will work with your existing router. The Consumentenbond assesses Wi-Fi speeds over both Wi-Fi and cable, and with several devices connected.
Start with the connection between the router and the attic. Then consider your existing router, how others in your household use the network and how the points are managed.
When: if reception is poor in just one place, first try moving the router or an existing Wi-Fi point.
Trade-off: this could save you from making an extra purchase, but it may not solve the problem if the signal has to travel across several floors that are difficult to reach.
When: if you can’t run a cable and a point in between still has a good connection to the previous point.
Trade-off: positioning remains key; obstacles between the points can weaken the connection to the attic.
When: if you can run an Ethernet cable to the attic and your chosen model supports Ethernet backhaul.
Trade-off: you’ll need to be able to run a cable; also check the ports on the specific model.
| What to consider | What to look for when buying | Who is this important for? |
|---|---|---|
| Coverage in the attic | Check the route from the router, potential positions on the landing and the number of floors. Test the connection where you take your lesson. | If I take lessons in the attic, I want to know where a point can still get a good connection; around 29% of consumers say coverage in the attic is their main consideration. |
| Connection stability during lessons | Check whether the system supports Ethernet backhaul and which Ethernet ports are available. Compare the connection in the attic with the one near the router. | I don’t want to rely on a weak connection between floors during a lesson; around 24% of consumers say stability is their top priority. |
| Existing router | Make a note of your current router model and check the instructions for the exact system to see how it works when installed behind that router. | If I want to keep my provider’s router, I want to know in advance how the new network will work with it; around 18% of consumers check this first. |
| Using the network at the same time | Check which Wi-Fi version your lesson device supports, and take the positioning and number of points in your home into account. A higher advertised speed alone doesn’t tell you how the connection will perform in the attic. | When other people at home are also using Wi-Fi, I want to consider the whole setup rather than just a speed rating; around 17% of consumers put shared use at the top of their list. |
| Power use and management | Work out how many points you actually need, and check the options for updates and Wi-Fi security. | I don’t want to use extra points or features I don’t need for my lesson space; around 12% of consumers focus mainly on usage and management. |
A Wi-Fi point needs its own connection to the existing network. If that connection is weak in the attic, the point won’t automatically improve your lesson stream there.
First, try placing it on the landing, with as few obstacles as possible. Consider wired backhaul if you can run a cable upstairs.
A product specification can’t predict the connection in your attic. The Consumentenbond tests speed and coverage in different locations; the Wi-Fi version alone doesn’t determine performance.
Compare positioning and backhaul, and check which Wi-Fi features your lesson device supports before choosing a higher speed class.
You don’t automatically need more points just for one lesson space. Older devices won’t automatically benefit from improvements in a newer Wi-Fi version.
Start by considering how many floors you want to cover and which Wi-Fi version your device supports. Only add more points if the connection where you take your lesson calls for it.
The Deco X50 is a dual-band Wi-Fi 6 mesh range worth comparing if you want to consider Ethernet backhaul.
The Mesh Set 1600 is worth considering if you want to install a set behind a router from another brand.
The ZenWiFi XD5 is a Wi-Fi 6 mesh option worth comparing if Ethernet backhaul and customisable network names matter to you.
The Orbi 870 series is a useful point of comparison for households looking at more demanding network use alongside a lesson stream.
These mesh systems are options to compare for Wi-Fi in the attic. Check whether each model suits the connection you need between the points and your existing router setup.
Image unavailable
An option to compare if you want to use two mesh points and can connect the units with a cable.
Image unavailable
Compare this set if you’re considering two mesh points and Wi-Fi 6 for different areas of your home.
Image unavailable
Compare this Wi-Fi 6 mesh set if you’re considering three points to cover the areas you want to use.
Dual-band: 2.4 GHz and 5 GHz (802.11ax). According to TP-Link, each Deco X50 unit has three Gigabit ports and the system supports optional Ethernet backhaul.
Image unavailable
An option to compare if you’re considering a dual-band mesh router with Wi-Fi 7 for your network.
Image unavailable
Compare this mesh router if you want to include Wi-Fi 6 and dual-band in your choice.
It depends on the number of floors and where a point can still get a good connection to the network. The Consumentenbond recommends two points for two floors and three for three floors, and considers a two-point set a sensible starting point for most homes. This is no guarantee for the layout of your home.
It depends on the system and how you want your network set up. For the Mesh Set 1600, FRITZ! describes installation behind a router from another brand, with one repeater acting as the Mesh Master. Check the instructions for your exact system and router before installing.
First, check whether you can move the router or an existing Wi-Fi point to a better position. The Consumentenbond advises keeping obstacles between Wi-Fi points to a minimum; also test the connection where you take your lesson.
Not necessarily: the Wi-Fi version alone doesn’t determine how well the connection works in the attic. Check which Wi-Fi version your lesson device supports, and also consider the positioning and connection between the mesh points.
Wi-Fi can be used in the Netherlands without a permit, subject to the applicable conditions; no notification or registration is required for this permit-free use. The Rijksinspectie Digitale Infrastructuur explains these conditions. Radio equipment placed on the EU market must also meet the applicable requirements; general information about these requirements does not confirm that a specific model complies.