Student with poor attic coverage
If you use a study portal in a converted attic, you’ll want to find out first whether the interruptions are caused by Wi-Fi and whether an additional node will still get a good enough signal in that spot.
First, use a network cable to check that your internet connection itself is working. The Consumers’ Association recommends a wired speed test to distinguish problems with the line from Wi-Fi issues. If the signal is particularly weak in the attic, choose an additional mesh node based on where you can place it and whether Ethernet backhaul is possible. Before buying, check the CE marking and product information for the exact version.
If you use a study portal in a converted attic, you’ll want to find out first whether the interruptions are caused by Wi-Fi and whether an additional node will still get a good enough signal in that spot.
If you can run a cable to your study space, a wired connection between Wi-Fi nodes could be an alternative to a wireless connection that has to pass through a floor or wall.
If you want to keep your current router, check which network roles and features will remain available when the mesh system is working as an access point.
First, test your internet connection using a cable, then check Wi-Fi in your study space. The Consumers’ Association recommends a wired speed test to assess your internet connection separately from Wi-Fi.
| What to consider | What should you check? | Who is this important to? |
|---|---|---|
| Coverage in your study space | Test Wi-Fi in the attic and check whether you can place an additional node somewhere it will still get a usable signal. | If the study portal keeps stalling mainly in the attic, I want to know whether a mesh node will still get a connection there. Around 36% of consumers put reliable coverage at the top of their list. |
| Connection between Wi-Fi nodes | Check whether you can run Ethernet to the additional location and whether the system supports Ethernet backhaul. | If I can run a cable to the attic, I don’t want the connection between mesh nodes to still depend on Wi-Fi passing through the floor. Around 29% of consumers prioritise a stable, wired connection between nodes. |
| Existing router and management | Check the available operating mode and which app features are included in that mode. | If I want to keep my internet provider’s router, I want to know in advance which device will manage the network and which features will change. Around 21% of consumers prioritise compatibility with their existing router and network management. |
| Purchase and running costs | After testing, work out how many nodes you need and compare the energy consumption of the specific versions. | If you want to avoid unnecessary spending, you won’t want to buy a larger system than your coverage tests show you need. Around 14% of consumers put total costs first. |
A slow connection in the attic could be caused by Wi-Fi obstacles, while a wired test helps you assess your internet connection separately.
First, test with a network cable, then check Wi-Fi in your study space.
The position of the nodes and obstacles such as walls and floors affect the connection in your home. So a stated range won’t necessarily tell you how Wi-Fi will perform in your attic.
Test possible positions and only decide how many nodes you need once you’ve checked coverage in the relevant areas.
You may still need an additional node or cable run, and you’ll need space to install it.
According to TP-Link, some router features are unavailable in the Deco app when the system is working as an access point.
Decide in advance which router should manage your network and check which features are included in your chosen operating mode.
According to TP-Link, the Deco X50 range includes Wi-Fi 6, various system sizes, gigabit ports and optional Ethernet backhaul.
ASUS describes the ZenWiFi XD5 as a Wi-Fi 6 mesh system with Ethernet backhaul when cabling or Ethernet ports are available.
According to the manufacturer, the FRITZ!Repeater 3000 AX is a tri-band Wi-Fi 6 extender that can also connect via LAN.
These products are mesh systems for extending Wi-Fi to several areas of your home, including models that specify a wired connection between nodes. Before buying, check the CE marking and product information for the exact version. The RDI states that radio equipment must meet the applicable European requirements and carry a CE marking.
Image unavailable
A mesh system with two nodes for extending Wi-Fi to several areas of your home.
The product name specifies dual-band on 2.4 and 5 GHz and Wi-Fi 6 (802.11ax). The product description also mentions a connection over existing electrical wiring; check that the connection will work in your home.
Image unavailable
A mesh system with two nodes for extending Wi-Fi to several areas of your home.
The product name specifies tri-band on 2.4, 5 and 6 GHz and Wi-Fi 7 (802.11be).
Image unavailable
A two-node mesh system for anyone who can run a wired connection between the nodes.
The product name specifies Wi-Fi 6; the product description mentions Ethernet backhaul for the mesh nodes.
Image unavailable
A three-node system for extending Wi-Fi to several areas of your home.
The product description specifies dual-band Wi-Fi 5 (802.11ac) and three nodes that work together. Check the signal in your study space after installation.
Image unavailable
A mesh system with three nodes for extending Wi-Fi to several areas of your home.
The product name specifies dual-band on 2.4 and 5 GHz and Wi-Fi 6 (802.11ax). After testing coverage, decide whether three nodes are right for the areas you want to reach.
Not necessarily. First, connect a laptop using a network cable to distinguish internet connection problems from Wi-Fi issues in your home.
Try a position where the node itself can still get a connection; walls and ceilings can weaken the signal. If you can run a cable, compare a wired connection between nodes with a wireless setup.
You can with a suitable access point configuration, but check which device will manage the network and which features will remain available. TP-Link says some Deco app features aren’t available when Deco is working as an access point.
Take into account the energy used by nodes that are switched on all the time, and compare consumption figures for the specific versions. Also check whether any features or services you want to use come with additional terms.
Check the CE marking and product information for the exact version. The Netherlands Authority for Digital Infrastructure states that radio equipment must meet the applicable European requirements and carry a CE marking; a shop or model name alone doesn’t confirm that a specific version has the marking.