Household with a study set up in the attic
You want to study in the attic while others are online elsewhere in the house. The connection between floors matters more than the coverage figure quoted on the box.
If there’s a usable network cable running to the attic, or you can install one, you can connect your mesh nodes using Ethernet backhaul. This means the connection between the nodes runs through the cable rather than between floors. If there’s no cable, a fully wireless mesh system may be suitable, but coverage and throughput depend on your home, where you place the nodes and how many devices are being used at once. Before buying, check that the system will work with your existing modem or router, and look for the CE marking on the version you receive.
You want to study in the attic while others are online elsewhere in the house. The connection between floors matters more than the coverage figure quoted on the box.
You can make use of an existing Ethernet cable and want to check that your chosen mesh nodes and connection mode are compatible.
You’re looking for a wireless extension that you can test in your study area, without assuming a particular level of coverage or speed in advance.
Suitable when: there’s a usable network cable running to the attic, or installing one is practical.
Bear in mind: the cable route and the correct connection; with Deco, connection options can vary between router mode and access point mode.
Suitable when: running a cable isn’t practical and an intermediate node can still get a usable connection to the main network.
Bear in mind: building materials, obstacles, network traffic and device placement all affect the actual connection.
| What to consider | What to look for | Who should prioritise this? |
|---|---|---|
| Coverage in the attic | Consider the number of mesh nodes and where you can place them; assess the connection in your actual study area. | If my current router doesn’t reach the study set up in the attic properly, I want to be able to test the connection there myself. Around 36% of consumers say usable attic coverage is their top buying priority. |
| Studying online at the same time | Compare the bands supported by the exact model and test the connection while several devices are in use at once. | When several people in my household are studying at the same time, I want to know how the connection performs on our devices and in our study areas. Around 29% of consumers say simultaneous use is their top priority. |
| Connection between floors | Check that Ethernet backhaul is supported and, with Deco, that the connection is suitable for the selected mode. | If there’s a cable running to the attic, or I can install one, I want to use it to connect the mesh nodes. Around 21% of consumers say a wired connection is their top priority. |
| Installation and number of nodes | Check how many nodes are included in the box and how to set up the system with your existing internet source. | I want to know in advance how many nodes I’ll need and what installation involves, while continuing to use my existing internet source if the model supports it. Around 14% of consumers prioritise easy management and the total purchase cost. |
Floors, building materials, obstacles and device placement all affect the actual connection. An extra node won’t necessarily help if it can’t get a usable connection to the main network itself.
Assess the mesh system in the places where you’ll actually study and, if possible, compare it with a wired connection between the nodes too.
If the connection in the attic isn’t good enough, you may need to reposition the nodes, add another one or install a cable.
A box containing one node won’t automatically give you mesh nodes for several locations.
Before buying, check how many units are included and the exact model variant.
You may need an extra compatible node to cover several locations.
A quoted combined speed doesn’t tell you how much throughput each device will get in the attic. Actual throughput also depends on the network, devices and surroundings.
Assess the connection on the devices and in the locations you’ll use when studying together.
A manufacturer’s warranty doesn’t replace your statutory rights against the seller.
Keep your proof of purchase and contact the seller if a product develops a fault sooner than it should under normal use.
The Deco range includes the dual-band Wi-Fi 6 Deco X50 and the tri-band Wi-Fi 6E Deco XE75. These have different band configurations to compare across the exact sets.
The ZenWiFi XD5 is a Wi-Fi 6 mesh model for anyone considering a setup with Ethernet backhaul.
Orbi is a mesh product range with a variety of sets and band configurations.
These Joybuy products are mesh sets for Wi-Fi coverage in several parts of your home, including setups with wired or wireless connections between the nodes. Before buying, check the CE marking on the version actually supplied and the number of units included.
Image unavailable
A mesh set with two units for use in several locations; the product description lists wired and wireless backhaul options.
Tri-band Wi-Fi 7. The listed ports per unit are 10, 2.5 and 1 Gbps.
Image unavailable
A mesh set with three units for Wi-Fi coverage in several locations, with 2.4 and 5 GHz bands.
Dual-band Wi-Fi 5. The product description lists two network ports per unit, with a maximum speed of 100 Mbps.
Image unavailable
A mesh set with two units for use in several locations around the home.
Tri-band Wi-Fi 7 with 2.4, 5 and 6 GHz bands.
Image unavailable
The product description for this mesh model lists a wired backhaul option; check that the cable route and connection suit your setup.
Dual-band Wi-Fi 7 with 2.5 Gbps ports.
Image unavailable
A mesh set with three units for Wi-Fi coverage in several parts of your home.
Dual-band Wi-Fi 5. The product description lists two Ethernet ports per unit.
Not always: TP-Link describes Deco as a system that needs an existing internet source and can connect to an existing router. If you want to connect your own modem or router directly to your provider’s network, ACM ConsuWijzer explains that you have the right to choose, subject to security and network connection requirements. Check which settings you’ll need.
The connection depends on the mode selected. According to TP-Link, in router mode a wired satellite must be connected to the LAN port of the main Deco or to a switch connected to it; different connection options apply in access point mode. Once connected, check in the app that Ethernet backhaul is active.
No, a quoted range doesn’t guarantee a connection in your attic. TP-Link lists building materials, obstacles, network traffic and device location among the factors that affect actual coverage and throughput. So test the connection in the attic itself.
According to ACM ConsuWijzer, online purchases usually come with a 14-day cooling-off period; conditions and exceptions may apply. You also have a statutory guarantee: if the product develops a fault sooner than it should under normal use, the seller is responsible for providing an appropriate solution. A manufacturer’s warranty doesn’t replace this right.
Check that the version supplied carries the correct CE marking. The Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur) states that radio equipment sold in Europe must meet the applicable requirements and carry a CE marking.