A studio with poor attic coverage
Your existing Wi-Fi doesn’t adequately reach the converted attic. Consider whether you can run a cable or place a wireless unit somewhere it can still connect to the main network.
If you can run an Ethernet cable to the attic, compare mesh with Ethernet backhaul against a wired access point. This makes the connection between floors less dependent on Wi-Fi. If running a cable isn’t possible, wireless mesh could be an option, provided the units can still connect reliably from suitable locations. Also check the ports, guest access and compatibility with your existing router; the stated coverage isn’t a measurement of your studio.
Your existing Wi-Fi doesn’t adequately reach the converted attic. Consider whether you can run a cable or place a wireless unit somewhere it can still connect to the main network.
Several people and work devices use the network at the same time. So, look beyond Wi-Fi and check the connection between floors, as well as the Ethernet ports on the exact version you’re considering.
Visitors need Wi-Fi, and you’ll want to consider how their access compares with that of your work devices. Check the guest network options on the system you choose.
When: if there’s an Ethernet cable to the attic and you want Wi-Fi there for workspaces.
Consider: you’ll need cabling and suitable connections. TP-Link and ASUS describe Ethernet backhaul for the Deco X50 and ZenWiFi XD5 respectively, but that doesn’t tell you how well a set will perform in your building.
When: if running a cable isn’t practical and a unit can still connect reliably to the main network from an intermediate location.
Consider: the connection to the attic will still depend on placement and signal strength. Check reception in the intended locations before drawing conclusions from a stated floor area.
When: if you already have a suitable router and an Ethernet cable to the studio, and mainly need Wi-Fi there.
Consider: you may be able to keep your existing router, but features and management depend on the router and access point you choose. Don’t assume that every access point will work with every mesh system.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Attic coverage | Where the main unit and attic unit can go, and whether Ethernet backhaul is possible. | If Wi-Fi drops out in the converted attic, I want to know whether a unit can still connect reliably there. Around 36% of consumers put attic coverage first. |
| Using the network for work at the same time | Which devices need a wired connection and how many ports the exact unit has. | If several designers are working at the same time, I want to consider the connection and the wired work devices. Around 29% of consumers prioritise using the network for work at the same time. |
| Guest access | Which guest network options are available and how to set them up. | If visitors use Wi-Fi, I want to be able to assess their access separately from that of the work devices. Around 21% of consumers put guest access first. |
| Purchase and setup | The number of units required, any cabling, and the equipment you already have. | If I want to keep my existing router, I want to weigh up the equipment and installation needed in advance. Around 14% of consumers make purchase and setup their top priority. |
A manufacturer’s coverage area doesn’t tell you whether the units will have a reliable connection in the right locations in your building.
First, work out where the units could go and check the connection in those locations. Then decide how many units would suit that setup.
An extra unit or cabling could add to the installation.
The number of units included varies by version. A 2-pack won’t automatically replace a 3-pack if your setup needs three units.
Compare the full model name, the number of units and what’s included in the box.
If the set you choose is too small for the setup you need, you may need an extra unit.
Google says Nest Wifi Pro can’t be used in the same mesh network as older Nest Wifi or Google Wifi points.
Check compatibility within the exact product family before expanding a system.
If your existing points can’t be combined, you may need to replace them.
The Deco X50 is worth considering if you want to compare wireless mesh with the option of Ethernet backhaul.
The ZenWiFi XD5 is worth considering if you want to factor in existing Ethernet cabling and customisable network names.
The FRITZ!Mesh Set 1700 is worth considering if you want to keep your existing router and guest access is important to you.
Nest Wifi Pro is worth considering if you’re looking at an expandable system and will first check compatibility with your existing Wi-Fi devices.
These product options are mesh systems for an attic studio, with versions that list features including Ethernet ports, Ethernet backhaul or guest access.
Image unavailable
A mesh set to consider if you want to place several units or use Ethernet backhaul.
Wi-Fi 6; dual-band (2.4 GHz/5 GHz); optional Ethernet backhaul; three gigabit ports per unit.
Image unavailable
A mesh option to consider if you’re weighing up both Wi-Fi bands and connections for wired devices.
Wi-Fi 7; tri-band (2.4 GHz/5 GHz/6 GHz); gigabit and 2.5-gigabit ports.
Image unavailable
A mesh set to consider if guest access and Ethernet ports for work devices are important.
Wi-Fi 6E; tri-band (2.4 GHz/5 GHz/6 GHz); three gigabit ports per unit; guest access and QoS.
Image unavailable
A mesh set to consider if you want to factor in several Ethernet ports and guest access.
Wi-Fi 6E; tri-band (2.4 GHz/5 GHz/6 GHz); three Ethernet ports per unit; guest access and QoS.
Image unavailable
A mesh set to consider if PoE power or guest access is important for your studio.
Wi-Fi 6; dual-band (2.4 GHz/5 GHz); PoE; two Ethernet ports per unit; guest access and QoS.
No, wireless mesh is also an option. If you can run a cable, check whether the exact system supports Ethernet backhaul; TP-Link and ASUS describe this feature for the Deco X50 and ZenWiFi XD5.
No, not in the same mesh network. Google says Nest Wifi Pro can’t be combined with older Nest Wifi or Google Wifi points.
Check for firmware updates for your router and mesh units, and set up automatic updates if available. This doesn’t confirm a specific update period for any particular model.
If a product is faulty despite being used normally, the seller is responsible for providing an appropriate solution, according to ACM ConsuWijzer. This doesn’t establish a standard warranty period; if you’re buying on behalf of a business, check the applicable contractual terms.
According to the Dutch Authority for Digital Infrastructure, radio equipment covered by the applicable European requirements must carry a CE mark to be sold in Europe. Check the conformity information for the exact version; a Wi-Fi generation or ranking doesn’t prove compliance.