Who is this relevant to?

Attic worker without a network cable

Wants to make video calls from the home office and is looking for a reliable wireless route upstairs, without filling the narrow hallway with equipment.

Attic worker with ethernet

Can use a cable upstairs and is mainly looking for a well-placed Wi-Fi unit by the workspace, rather than a wireless node in the hallway.

Existing mesh network user

Wants to check first whether a compatible KPN or FRITZ! network can be extended before buying a whole new set.

What should you look for when buying?

Start by checking the cable route and the connection between nodes. Then check compatibility with your existing modem and how much space each node takes up.

What to consider What to check before buying Who should pay particular attention?
Wireless connection Test potential locations outside the walking route to see whether the node maintains a good connection to the previous one. Check whether the app shows connection quality. If I can’t run a cable upstairs, I want to know whether a location outside the walking route can still maintain a good connection to the previous node. Around 36% of consumers say that a wireless connection between floors is their top priority.
Ethernet backhaul Check whether there’s a cable route and which ethernet ports are available for backhaul and, if needed, a computer. If there’s a cable route, I want to know whether the nodes support ethernet backhaul and whether I’ll have a port left for my computer. Around 29% of consumers prioritise a wired connection to the attic.
Existing network Make a note of the exact modem model and, for FRITZ!, the FRITZ!OS version. Then check the installation requirements for the additional node. If I want to keep my current network, I first check that the modem and software version are compatible with the extension. Around 21% of consumers prioritise keeping their existing network setup.
Space and use Measure the space needed for the device and power cable, and keep the walkway clear. Work out how many nodes the setup needs. In a narrow hallway, I want to position the power supply and the whole device so the walkway stays clear, without setting up more nodes than necessary. Around 14% of consumers prioritise available space and running costs.

Common pitfalls

  • Putting an extra node in the attic when it can barely receive a signal

    With wireless mesh, the connection between nodes remains part of the route to your workspace. A node in a spot with a weak signal won’t fix that weak link by itself.

    TP-Link recommends checking connection quality at the intended location and considering ethernet backhaul if the wireless route is weak there.

  • Treating all Deco X50 versions as the same product

    The Deco X50-PoE is a different version from the standard Deco X50; features of one version don’t automatically apply to the other.

    Check the full model name and what’s included in the box before buying.

  • Choosing an extension from your internet provider without checking your modem

    KPN describes SuperWifi 2 as being for use with a KPN modem. So check whether your modem is suitable for that setup.

    Make a note of your modem model and check the installation requirements before choosing an additional node.

  • Choosing a three-node set based on the advertised coverage alone

    Walls and floors can weaken the Wi-Fi signal, so the position of the nodes and the connection between them still matter.

    Plan the locations first and check whether you can add a separate node later before deciding how many nodes to buy.

Brands to consider

TP-Link

The Deco X50 is a mesh system for anyone looking to create a new setup with multiple nodes, either wirelessly or with ethernet backhaul.

  • TP-Link describes ethernet backhaul and the option to add extra Deco nodes.
  • The advertised coverage doesn’t predict how the signal will perform in a particular attic with floors and obstacles in the way. The X50-PoE is a separate version.

ASUS

The ZenWiFi XD5 is a mesh range for anyone looking for a new set who may be able to use an existing ethernet connection between nodes.

  • ASUS describes ethernet backhaul and management through the ASUS Router app.
  • Check how many nodes are included in the exact package and which ports are available; the advertised coverage won’t tell you how well the signal will reach your attic.

FRITZ!

The FRITZ!Repeater 3000 AX is a potential way to extend a compatible existing FRITZ!Box, either wirelessly or via LAN.

  • FRITZ! describes mesh integration with a FRITZ!Box running FRITZ!OS 7 or later, as well as a LAN bridge.
  • For a router from another brand, FRITZ! describes using an access point via LAN, but not the same FRITZ! mesh integration.

KPN

SuperWifi 2 is an extension option for households with a compatible KPN modem.

  • KPN describes both wireless and wired connections for SuperWifi nodes and offers help with positioning them.
  • According to KPN, SuperWifi 2 works with a KPN modem, so check whether your modem is suitable for the setup.

Joybuy products for mesh Wi-Fi

This selection includes mesh sets for getting a connection to an attic room, with different numbers of nodes and options for wireless or wired backhaul. Choose a setup based on your cable route, the space available and compatibility with your existing network.

TP-Link Deco BE68 mesh set with two nodes

TP-Link Deco BE68 (2-pack)

Suitable for anyone looking for a two-node mesh set with a choice of wireless or wired backhaul.

Tri-band; 10, 2.5 and 1 Gbps WAN/LAN ports per node.

View at Joybuy
TP-Link Deco M4 mesh set with three nodes

TP-Link Deco M4 (3-pack)

Suitable for anyone considering three mesh stations as the basis for a wireless setup.

Wi-Fi 5, dual-band (2.4 and 5 GHz). The Deco app is listed as a tool for setup and finding suitable locations.

View at Joybuy
TP-Link Deco X50 mesh set with three nodes

TP-Link Deco X50 (3-pack)

Suitable for anyone looking to combine three Deco X50 nodes with the option of a wired connection between units.

Wi-Fi 6, dual-band (2.4 and 5 GHz), with optional ethernet backhaul and three Gigabit Ethernet ports per unit.

View at Joybuy
Linksys Velop Pro 7 mesh set with two nodes

Linksys Velop Pro 7 (2-pack)

Suitable for anyone who wants to start with two nodes and keep the option of expanding the mesh network.

Tri-band Wi-Fi 7; expansion is described as using extra Velop Pro 7 nodes or compatible Linksys Cognitive Mesh devices.

View at Joybuy
TP-Link Deco X50-PoE mesh set with two nodes

TP-Link Deco X50-PoE (2-pack)

Suitable for anyone considering a two-node mesh set with PoE support; this is the X50-PoE version.

Wi-Fi 6, dual-band (2.4 and 5 GHz), with PoE support and two ethernet ports per unit.

View at Joybuy

Frequently asked questions

Does a mesh node have to go in the middle of the hallway to reach the attic?

No. With wireless mesh, choose a practical location where the node can still maintain a good connection to the previous one, and check the connection quality. If you have ethernet running upstairs, you can connect the next node via that cable without needing a wireless node in the hallway.

How do I work out how many mesh nodes I need?

Start by listing the floors and locations where you need Wi-Fi, then test potential positions for any intermediate nodes. The Consumers’ Association suggests starting with a two-node set for most homes, but that won’t guarantee coverage in every property; also check whether you can add another node later.

Can I use a new mesh node with my current modem?

It depends on your modem and the extension you choose. KPN describes SuperWifi 2 as being for use with a KPN modem; the FRITZ! mesh integration described requires a FRITZ!Box running FRITZ!OS 7 or later. Check the installation requirements for your exact modem.

What regulations apply to a Wi-Fi router or mesh node in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, radio equipment placed on the market in the Netherlands must meet the applicable European requirements and carry the required CE marking. The applicable RED 3.3 cybersecurity requirements have applied to designated radio equipment since 1 August 2025; the broader CRA obligations mentioned by the Authority will take effect on 11 December 2027. Check which requirements apply to the specific device; these general rules alone don’t confirm that a particular product complies.