Student with weak Wi-Fi in the attic
Your usual spot for online lessons is in a converted attic, where the picture or sound cuts out, even though the connection is better nearer the router.
First, test the connection at your usual study spot and compare it with the Wi-Fi near your router. If the attic connection is particularly weak, a mesh node connected to the attic by an Ethernet cable could be a good solution, if you can run a cable. Without a cable, wireless mesh may work if an intermediate node can still receive a strong signal. Then work out how many nodes you need and check how the system will work with your existing router.
Your usual spot for online lessons is in a converted attic, where the picture or sound cuts out, even though the connection is better nearer the router.
You can use an Ethernet cable and want to know how to set up a Wi-Fi node in the attic and connect it to the router.
You need to connect the floors wirelessly and are looking for a suitable spot for an intermediate node.
First, compare the connection at your study spot with the one near the router. Only then decide whether you need no extra node, a wired connection to the attic or wireless mesh with an intermediate node that can still receive a strong signal.
| Buying concern | What to look for | Which consumers? |
|---|---|---|
| Wi-Fi at your study spot | Test the connection at your usual study spot and compare it with the one near the router; find out where the signal gets weaker. | If my lessons keep cutting out in the attic, I want to know whether that spot is the problem before choosing equipment. Around 36% of consumers prioritise fixing dropouts at their study spot. |
| Connection between floors | Check whether there is a cable route and whether the model supports Ethernet backhaul; without a cable, test the signal at a possible intermediate spot. | If the route to the attic is the weak link, I want to know whether I can use a cable or place an intermediate node where the signal is strong enough. Around 29% of consumers prioritise this connection. |
| Existing router | Check which router or access point modes are supported, how the main unit connects and which features remain available in that mode. | If I want to keep using my provider’s router, I want to know which network functions the mesh system will take over. Around 21% of consumers prioritise compatibility with their existing router. |
| Use and support | Compare what’s included in the package and how many nodes you need; also check any services, updates and the seller’s and manufacturer’s terms and conditions. | If I need the system for one regular study spot, I don’t want to choose nodes that aren’t right for my setup. Around 14% of consumers prioritise the purchase and after-sales support. |
A stated range doesn’t necessarily tell you what the connection will be like at your usual study spot. The Consumentenbond notes that mesh system performance can vary.
Test the Wi-Fi in the attic and see where the signal drops between the router and your study spot before choosing the size of the package.
A wireless mesh node still needs to be able to establish a strong connection to the rest of the network.
First, try a spot on the route to the attic where the signal is still strong. Use a cable to the attic if that’s practical.
This wireless setup may require an extra intermediate node; running a cable may involve installation work.
TP-Link states that certain advanced features are unavailable in access point mode on Deco systems.
For your chosen model and software version, check which router, app and features you’ll use after installation.
NETGEAR includes one year of Armor with the Orbi RBK763S system.
Check the terms and conditions, then decide separately whether you want to keep using the service after the included period.
These brands are included as points of reference for specific mesh models and features. Their inclusion says nothing about availability or suitability for every home.
The Deco X50 is a dual-band Wi-Fi 6 mesh system worth comparing if you have a cable to the attic or want to match the network mode to your existing router.
The ZenWiFi XD5 is a Wi-Fi 6 mesh system to compare if you can use Ethernet backhaul between the hubs.
The FRITZ!Mesh Set 1700 is an option to compare if you want to connect a system to an existing router and take its stated update support into account.
The Orbi RBK763S is a wireless mesh option to compare if you can’t use a cable between the router and satellites.
These mesh systems are designed to extend Wi-Fi to multiple areas of your home. For the version on offer, check the CE marking and applicable radio equipment requirements. The RDI also outlines the applicable RED 3.3 cybersecurity requirements, in force since 1 August 2025.
No image available
A mesh system for extending Wi-Fi to multiple areas of your home.
Dual-band (2.4 GHz/5 GHz); Wi-Fi 5 (802.11ac); 3-pack.
No image available
A mesh system for extending Wi-Fi to multiple areas of your home.
Dual-band (2.4 GHz/5 GHz); Wi-Fi 5 (802.11ac); 3-pack.
No image available
A mesh system to consider if you need three nodes and can connect one of them using an Ethernet cable.
Dual-band (2.4 GHz/5 GHz); Wi-Fi 6 (802.11ax); 3-pack.
No image available
A mesh router to consider if you want to expand a network with multiple mesh units.
Dual-band; Wi-Fi 7.
No image available
A mesh router to consider if you want to extend your Wi-Fi with mesh nodes.
AX3000; dual-band; Wi-Fi 6.
You can’t work that out just by counting the floors. Test where the Wi-Fi gets weak and where a wireless intermediate node can still receive a strong signal. With a cable, you can place a node right by the weak spot.
Not with the Deco setup described here: TP-Link says to connect one main unit to the existing router using an Ethernet cable. Then choose router or access point mode carefully, and check the instructions for any other system separately.
Compare the connection in the attic with the one near the router, and check the placement or cabling of the nodes. Also investigate your internet connection and study device: extra Wi-Fi coverage won’t fix every problem outside your home network.
Yes. ACM ConsuWijzer explains that you have the freedom to choose your router. A provider may refuse to allow your own device, for example, if it’s unsafe. Also check the connection settings and your chosen network setup.
For the version on offer, check the CE marking and applicable radio equipment requirements. The RDI also outlines the applicable RED 3.3 cybersecurity requirements, in force since 1 August 2025.