Who is this choice relevant to?

Working from home in the attic

Want to find out whether your video calls are cutting out because of your internet connection or weak Wi-Fi coverage in the attic? Test the connection using a computer connected by cable, then check the route between your router and the attic. Consumentenbond recommends using a network cable for an internet speed test.

Households with several people online at once

Want to work upstairs while others are online? Check where the mesh nodes can go, whether you can connect them to each other by cable, and which devices you might be able to connect directly. TP-Link and ASUS describe Ethernet backhaul as an option for their respective systems.

Owners of an existing mesh network

Want to extend your network to the attic without replacing the whole system unnecessarily? First check that the new node works with your existing equipment. For example, Google says that Nest Wifi Pro cannot be combined in a single mesh network with older Nest Wifi or Google Wifi points.

What should you look for when buying?

Start by testing your internet connection over a cable. Then decide whether to run a cable upstairs or use a fully wireless connection between the mesh nodes.

What to consider What should you check? Who is this important to?
Connection to the attic Check whether the nodes support Ethernet backhaul and where you could run a cable or place an intermediate node. If the connection is wireless, bear walls and floors in mind. If I mainly need a usable connection in the attic, I want to know how the signal will reach that floor. Around 40% of consumers making this choice have this as their priority.
Using the network at the same time Check which Wi-Fi generations your devices support, and don’t compare systems on the basis of an aggregated Mbps figure alone. Also check whether you can connect a work computer by cable. When several people are working and online at the same time, I want to know whether the setup I choose will suit my devices. Around 30% of consumers have simultaneous use as their top priority.
Existing network Make a note of the full model names of your router and mesh nodes, and explicitly check whether they can form a single mesh network. If I want to keep my existing equipment, I want to know in advance whether a new node will work with it. Around 20% of consumers have keeping their network as their top priority.
Overall setup Compare the nodes, cables and connections you’ll need for the setup you have in mind. Also check power consumption and what your provider already supplies. If my main concern is keeping the cost of a working setup under control, I don’t want to buy components I don’t need. Around 10% of consumers have cost as their top priority.

Pitfalls to avoid

  • Assuming a claimed coverage area guarantees a signal in the attic

    Walls, floors and the distance between mesh nodes all affect the connection. A stated range doesn’t tell you how the signal will perform in your home.

    First test the connection over a cable, then try different positions for the nodes. Consumentenbond recommends keeping obstacles between Wi-Fi points to a minimum.

  • Assuming similar model names mean the products are the same

    The Deco X50 and Deco X50-PoE have different model names. The version found at Joybuy is an X50-PoE; it is not necessarily the same as the standard X50.

    Before buying, check the full model name and the specifications of the version on offer.

  • Buying a new node without checking your existing equipment

    Not every mesh node will form a single mesh network with your existing devices. Google says that Nest Wifi Pro cannot be combined in one mesh with older Nest Wifi or Google Wifi points.

    Make a note of the full model names in your current network and check compatibility before choosing an extension.

Brands to consider

TP-Link

The Deco range includes mesh products. TP-Link Netherlands describes Ethernet backhaul as an option for the Deco X50.

  • A wired connection between nodes may be useful if you can run a cable to the attic.
  • Check the exact model: the Deco X50-PoE is not necessarily the same version as the standard Deco X50. A manufacturer’s claimed range won’t predict how far the signal will reach in your home.

ASUS

ASUS describes the ZenWiFi XD5 as a mesh system that can use Ethernet backhaul.

  • According to ASUS, a wired connection between nodes can leave the Wi-Fi bands free for wireless devices.
  • A claimed coverage area is not a measurement of the range in your home. Also check the version and number of nodes in the set.

FRITZ!

The FRITZ!Repeater 3000 AX is designed to extend an existing network, particularly if you already use a FRITZ!Box.

  • FRITZ! describes connection via LAN and integration with a FRITZ!Box mesh network.
  • If you’re using a router from another brand, don’t assume that the same FRITZ! mesh features will be available without checking first.

Google

Google describes Nest Wifi Pro as an expandable Wi-Fi 6E mesh system.

  • Google lists two Ethernet ports per router.
  • According to Google, Nest Wifi Pro cannot form a single mesh network with older Nest Wifi or Google Wifi points. The manufacturer’s coverage figure is not a measurement of the signal in your home.

Mesh products at Joybuy

This selection includes mesh systems with Wi-Fi 5, Wi-Fi 6 or Wi-Fi 7, as well as Powerline or Ethernet options. Before buying, check that the exact version on offer meets the applicable European requirements for radio equipment. The Rijksinspectie Digitale Infrastructuur states that conformity is required for CE marking, and that stricter cybersecurity requirements have applied since 1 August 2025 to wireless devices placed on the European market.

TP-Link Deco PX10 dual-band Wi-Fi 6 mesh system

TP-Link Deco PX10 dual-band Wi-Fi 6

The product description mentions Powerline as well as Wi-Fi for extending coverage to areas where the Wi-Fi signal is weakened. Check whether this approach will work in your home.

Dual-band: 2.4 GHz and 5 GHz. Wi-Fi 6 (802.11ax).

Joybuy
TP-Link Deco X50 3-pack dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack)

A good option for a setup with Ethernet backhaul if you can run a cable between floors; TP-Link lists this as an option for the Deco X50.

Dual-band: 2.4 GHz and 5 GHz. Wi-Fi 6 (802.11ax).

Joybuy
Linksys Velop Pro 7 tri-band Wi-Fi 7

Linksys Velop Pro 7 tri-band

A Wi-Fi 7 mesh option to compare if your devices and usage suit this generation; Wi-Fi generation alone won’t predict the signal strength in your attic.

Tri-band: 2.4 GHz, 5 GHz and 6 GHz. Wi-Fi 7 (802.11be).

Joybuy
TP-Link Deco X50-PoE 2-pack Wi-Fi 6 mesh system

TP-Link Deco X50-PoE (2-pack)

The PoE version may suit a mesh setup where you want to supply power over Ethernet; check that your installation is suitable.

Dual-band: 2.4 GHz and 5 GHz. Wi-Fi 6 (802.11ax). PoE support.

Joybuy
TP-Link Deco S7 3-pack dual-band Wi-Fi 5

TP-Link Deco S7 (3-pack)

A mesh system with three units to consider if this setup suits the rooms and layout of your home.

Dual-band: 2.4 GHz and 5 GHz. Wi-Fi 5 (802.11ac).

Joybuy

Frequently asked questions

Should I upgrade to a faster broadband package first?

Not before comparing your internet connection over a cable with Wi-Fi. Consumentenbond recommends running a speed test on a computer connected by network cable. If you continue to have problems with the connection, contact your provider.

Where should I place a wireless mesh node on the way to the attic?

Don’t automatically place the node where the signal is already weakest. Consumentenbond recommends keeping obstacles between Wi-Fi points to a minimum. Try a position where the node itself still has a usable connection to the rest of the network.

Can I use my own router alongside or instead of my provider’s router?

ACM ConsuWijzer explains that you’re free to choose your own router, with some limits if the equipment is unsafe. Ask your provider which connection details you’ll need and what role the existing modem must continue to perform. Additional network requirements may apply if you use your own modem.

What rules apply to a new Wi-Fi device in the Netherlands?

According to the Rijksinspectie Digitale Infrastructuur, European requirements apply to radio equipment, and CE marking is required when the device meets those requirements. Since 1 August 2025, stricter cybersecurity requirements have applied to wireless devices placed on the European market. Check the documentation for the exact version; a product listing alone does not prove conformity.

What can I do if a set I bought online doesn’t meet expectations or breaks?

Online purchases often come with a cooling-off period; ACM ConsuWijzer explains the conditions and exceptions. This is separate from your legal rights if a product does not do what you could reasonably expect of it. If the product is faulty, contact the seller and check which rules apply to your purchase.