What should you look for when choosing?
First, check the internet connection at your modem, then find a workable route to the attic. If you have a suitable cable, you could use Ethernet backhaul; without one, wireless mesh performance depends on where you place the extra node.
The Consumers’ Association lists walls and ceilings as potential sources of Wi-Fi interference. So check the connection both at the modem and at the intended locations for your mesh nodes.
| What to consider |
What should you check? |
Who is this important for? |
| Coverage in the attic |
Test the connection in the attic and where you plan to put an extra node; also check what’s included in the system. |
If I want to work upstairs, the connection needs to be usable at my desk, and any node along the way must still maintain a good connection. Around 36% of consumers prioritise coverage in the attic. |
| Wireless connection between nodes |
Check whether the extra node can connect wirelessly to the previous one, and try an open spot along the route upstairs. |
Without a cable, I need to find a spot where the extra node still gets a good signal. Around 29% of consumers prioritise a wireless connection between floors. |
| Cabling and ports |
Check whether the exact model supports Ethernet backhaul and how many suitable ports are available on each unit. |
If I can run a network cable upstairs, I want to know whether the mesh nodes can use that connection and whether I’ll have any ports left over. Around 21% of consumers prioritise a stable wired connection and connection options. |
| Modem and setup |
Check the connection instructions for your existing router and the app and account requirements for the system you choose. |
If I want to keep using my existing router, I want to know in advance how the system connects and is managed. Around 14% of consumers prioritise setup with their existing equipment. |
Joybuy products for multiple rooms
This selection features mesh systems with multiple units for use in different rooms. For each model, check whether it supports Ethernet backhaul and whether the ports suit your setup. Before buying, also check that the exact model carries the required CE marking.
No image available
TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5 (802.11ac)
The three-unit system gives you several possible places to position nodes along the route to the attic.
Dual-band: 2.4 GHz and 5 GHz. Two Ethernet ports per unit.
View at Joybuy
No image available
TP-Link Deco M4 (3-pack), dual-band Wi-Fi 5 (802.11ac)
The three units form a mesh network, with several possible locations around your home.
Dual-band: 2.4 GHz and 5 GHz. Two Ethernet ports per unit.
View at Joybuy
No image available
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6 (802.11ax)
The three units give you several placement options; TP-Link also says the X50 supports Ethernet backhaul.
Three gigabit ports per unit. Dual-band: 2.4 GHz and 5 GHz.
View at Joybuy
No image available
Linksys Velop Pro 7, tri-band Wi-Fi 7 (802.11be)
The product information lists two included nodes for a multi-node mesh setup.
Tri-band: 2.4 GHz, 5 GHz and 6 GHz.
View at Joybuy
No image available
TP-Link Deco S7 (3-pack), dual-band Wi-Fi 5 (802.11ac)
The system includes three units for a mesh setup with several possible locations.
Dual-band: 2.4 GHz and 5 GHz. Three Ethernet ports per unit.
View at Joybuy
Frequently asked questions
Does the extra mesh node need to go in the kitchen?
No, not necessarily. Choose an open spot where the node itself still gets a good signal; walls and ceilings can interfere with the connection. Check the route in your own home before choosing a permanent location.
Can mesh fix a slow internet connection from my provider?
No, mesh can’t fix an inadequate internet connection. First, run a test using a computer connected to the modem by cable. If the result is consistently much lower than the speed promised, the Consumers’ Association recommends contacting your provider.
Can I keep using my existing modem or router?
It depends on the mesh system and how it’s set up. TP-Link says Deco can connect to an existing router via Ethernet and needs an external internet source. Check the instructions for the exact system and your provider.
What if a mesh node I’ve bought breaks sooner than expected?
In the Netherlands, you have a legal guarantee in addition to any manufacturer’s warranty. If a product is faulty despite normal use, the seller is responsible for providing an appropriate solution free of charge. There’s no single fixed legal guarantee period for every product. ACM ConsuWijzer explains these consumer rights.
Do I need a licence or registration for mesh Wi-Fi at home?
In the Netherlands, you don’t need a licence to use Wi-Fi on the designated frequencies and in accordance with the conditions of use. According to the Dutch Authority for Digital Infrastructure, there’s also no notification or registration requirement. Equipment sold on the EU market must meet the applicable radio equipment requirements and carry the required CE marking.