Who is this buying guide for?

Anyone working in an attic with a weak Wi-Fi signal

Your main concern is how to get a usable network signal to your attic workspace, not which product has the highest advertised speed. The Consumers’ Association (Consumentenbond) highlights coverage and the placement of Wi-Fi points as important factors when choosing a system.

Households making video calls at the same time

You’ll want to assess the connection while several devices are on calls at once. VodafoneZiggo notes that people working from home sometimes move to another spot to get better reception during a video call. The connection between the points and your available upload speed also matter when choosing a system.

Anyone who wants to keep their ISP router

You’re looking to improve your Wi-Fi without accidentally having two routers manage the network at once. TP-Link describes access point mode for Deco when used alongside an existing router; check that the features you need are available in this mode.

What should you look for?

First, work out how the connection will reach between floors. Then choose the setup, number of points and operating mode that suit your home and existing router.

Mesh with Ethernet backhaul

Choose this if: you can run an Ethernet cable to the attic or somewhere nearby. TP-Link and ASUS describe Ethernet backhaul for certain mesh models.

Bear in mind: you’ll need to install a cable and check that your chosen system supports wired backhaul.

Fully wireless mesh

Choose this if: running cables isn’t practical and an intermediate point can still connect reliably to the point downstairs. TP-Link says the Deco XE75 has an extra 6GHz band for the connection between Deco units.

Bear in mind: the connection between the points is still wireless. An extra band or stated coverage range doesn’t prove that the signal will pass through your floors.

Wi-Fi over powerline

Choose this if: running Ethernet isn’t feasible and the wireless connection between floors isn’t working well. This setup uses your home’s electrical wiring to carry the connection.

Bear in mind: performance depends on your electrical installation. Devolo says its Magic adapters aren’t compatible with the older dLAN range.

What to consider What should you check? Who is this important for?
Connection to the attic Check where the mesh points can go and whether Ethernet backhaul is possible. The Consumers’ Association recommends starting with a two-point system for most homes; the number you need also depends on how many floors you have and where you place the points. If I mainly need coverage in the attic, I want to know whether the point there will maintain a usable connection to the network. Around 36% of consumers put a good attic connection at the top of their buying priorities.
Simultaneous video calls Test calls in the places you normally use and check the upload speed of your internet connection. For 720p video in its web app, Zoom recommends 2.6 Mbps upload and 1.8 Mbps download per participant connection; this isn’t a general requirement for every calling service. If people are on calls from several rooms at once, I want to know whether the connection will remain usable in both workspaces. Around 29% of consumers put simultaneous calls at the top of their buying priorities.
Existing ISP router Check whether the system has access point mode and which features remain available in that mode. According to TP-Link, the main router assigns network addresses when Deco is in access point mode. If I want to keep my ISP router, I want to improve Wi-Fi without any confusion over which device manages the network. Around 21% of consumers put keeping their existing router at the top of their buying priorities.
Cost and ongoing management Compare the number of points, ports, security updates and power consumption. Don’t choose the size of your system based on a coverage claim alone. I don’t want to choose a larger system than my home needs, and I want to keep managing it simple. Around 14% of consumers put the cost and ongoing management at the top of their buying priorities.

Common mistakes

  • Assuming a coverage claim in square metres guarantees a signal on your attic floor

    Where you place the points and how they connect between floors both affect the coverage you get at home. A stated coverage area isn’t a measurement of your home.

    Decide where the points can go in advance, then test the connection at your workspace before adding more to the system.

    An extra point or a cable run may require additional equipment or installation work.

  • Connecting a second mesh router without checking the operating mode

    The mode you choose determines which device manages network addresses and router functions. Some features aren’t available in Deco access point mode.

    Choose between router and access point mode deliberately, and check in advance which features you want to keep.

  • Treating powerline as the same as Ethernet backhaul

    Powerline uses your electrical wiring to carry the connection. Devolo also says its Magic adapters don’t work with the older dLAN range.

    Consider powerline as a separate way to connect and check the adapter range before reusing equipment you already own.

    This setup may require a separate, compatible adapter kit.

Brands to consider

TP-Link

The Deco X50 and Deco XE75 are different mesh models with different Wi-Fi configurations, as described by TP-Link.

  • TP-Link lists three Gigabit ports per unit and optional Ethernet backhaul for the Deco X50.
  • According to TP-Link, the XE75 has an extra 6GHz band; this isn’t a measurement of the connection in your attic.

ASUS

The ZenWiFi XD5 is a dual-band Wi-Fi 6 mesh option that supports wired backhaul.

  • ASUS describes Ethernet backhaul for homes with Ethernet ports in the walls.
  • Whether this connection will work for you depends on the ports and layout of your home.

FRITZ!

According to FRITZ!, the Mesh Set 1700 is a two-piece Wi-Fi 7 system that can be connected to an existing router.

  • FRITZ! lists features including automatic updates and compatibility with routers from other brands.
  • The Wi-Fi 7 label alone doesn’t prove you’ll get better video calls in your attic.

devolo

According to devolo, Magic 2 WiFi next combines Wi-Fi with powerline, offering an alternative way to connect.

  • devolo lists two Gigabit LAN ports on the Wi-Fi adapter.
  • According to devolo, Magic adapters aren’t compatible with the older dLAN range. Stated powerline speeds aren’t a measurement of your electrical installation.

Mesh Wi-Fi products at Joybuy

This Joybuy selection includes mesh systems for home Wi-Fi. Check how each model’s points connect to one another and which system size suits your home.

ASUS ZenWiFi BT8, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8, 2-pack, tri-band Wi-Fi 7

A two-piece mesh system to consider if you’re looking for a setup with several Wi-Fi frequency bands.

Tri-band on 2.4, 5 and 6 GHz; Wi-Fi 7 (802.11be).

Joybuy
ASUS ZenWiFi BD4, dual-band Wi-Fi 7

ASUS ZenWiFi BD4, dual-band Wi-Fi 7

A mesh option to consider if you’re looking for Wi-Fi 7 and two Wi-Fi frequency bands in a mesh setup.

Dual-band on 2.4 and 5 GHz; Wi-Fi 7 (802.11be).

Joybuy
Linksys Velop Pro 7, tri-band Wi-Fi 7

Linksys Velop Pro 7, tri-band Wi-Fi 7

A mesh option to consider if you’re looking for tri-band and Wi-Fi 7. Check how the points connect across the floors of your home.

Tri-band on 2.4, 5 and 6 GHz; Wi-Fi 7 (802.11be).

Joybuy
TP-Link Deco XE75, tri-band Wi-Fi 6E

TP-Link Deco XE75, tri-band Wi-Fi 6E

Worth considering if you’re looking at a Deco mesh model with an extra 6GHz band. TP-Link describes this band as supporting the connection between Deco units; its effect in your attic hasn’t been established.

Tri-band on 2.4, 5 and 6 GHz; Wi-Fi 6E (802.11ax).

Joybuy
TP-Link Deco X50, 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50, 2-pack, dual-band Wi-Fi 6

A two-piece mesh system to consider if you can set up a wired connection between the points. TP-Link says the X50 supports Ethernet backhaul.

Dual-band on 2.4 and 5 GHz; Wi-Fi 6 (802.11ax); three Gigabit ports per unit, according to TP-Link.

Joybuy

Frequently asked questions

Should I buy three Wi-Fi points straight away for an attic home office?

Not necessarily. The Consumers’ Association recommends three points for a three-storey home, but suggests starting with a two-point system for most homes and adding another point later if needed. Placement and the connection between the points still make a difference.

Can I use a Deco system without replacing my ISP router?

Yes. TP-Link describes access point mode for using Deco alongside an existing router. The main router then assigns network addresses, so check in advance which Deco features remain available in this mode.

Is a higher Wi-Fi speed enough for two simultaneous video calls?

No. The advertised Wi-Fi speed alone doesn’t tell you how usable the connection will be in both workspaces. Test calls from both places at the same time and check the upload speed of your internet connection. Zoom provides recommendations for each connection and video quality, not for the capacity of your internet connection or mesh setup.

What product regulations apply to a mesh Wi-Fi system sold in the Netherlands?

Radio equipment must meet applicable European requirements, and the manufacturer applies the CE marking when the product complies. According to the Dutch Authority for Digital Infrastructure, RED 3.3 cybersecurity requirements have also applied to designated equipment since 1 August 2025. Check the marking and product information for the specific version: a model listing alone doesn’t prove compliance.