Remote worker who backs up files regularly
You copy work files from the attic to a network drive or work server and want to know whether the connection between your workspace and the network is suitable.
For regular backups to a network drive, an Ethernet cable between mesh nodes is a sensible choice if you can run one to the attic. If that isn’t an option, consider powerline if your electrical wiring is suitable. Choose wireless mesh only if the nodes have a good connection to one another in their planned locations. Mesh connects devices, but it doesn’t make backups itself or replace suitable, secure storage for work documents.
You copy work files from the attic to a network drive or work server and want to know whether the connection between your workspace and the network is suitable.
Your attic is separated by structural obstacles. You mainly want to work out how the mesh nodes will connect to one another and where they can be placed.
You don’t want to confuse network coverage with secure storage, so you also check where work documents can be stored and who can access them.
First, decide how the attic node can connect to the rest of the network: by cable if you can run one, via powerline if your electrical wiring is suitable, or wirelessly if the nodes connect well to one another in their planned locations.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Local backups | Check whether Ethernet backhaul is supported and which ports are available for your computer and network drive. Bear in mind that backup speeds also depend on the connected devices and storage. | If you regularly copy files to a local network drive, you’ll want to know whether you can run a cable between the mesh nodes. Around 33% of consumers prioritise a reliable route for local backups. |
| Coverage through floors and walls | Test the connection between the mesh nodes in their planned locations. For powerline, also check the wall sockets and electrical wiring. TP-Link recommends plugging powerline Deco units directly into a wall socket. | If floors or walls interfere with the connection to the attic, you’ll want to know where a node can still maintain a good connection with the rest of the network. Around 27% of consumers give top priority to coverage through structural obstacles. |
| Storage and document security | Decide whether backups will go to an approved work server, network drive or cloud service. Make sure your work document storage complies with your organisation’s policies, and keep network software up to date. | If you work with sensitive documents, you’ll want the network connection to suit your storage location and access arrangements. Around 20% of consumers prioritise protecting documents and choosing where they are stored. |
| Installation and use | Check that the mode you choose is compatible with your existing modem, how many mesh nodes you need and where power sockets are available. Also consider power consumption for equipment that stays on all the time. | If you want to avoid an unnecessarily complicated setup or additional running costs, compare the installation requirements and the number of nodes needed. Around 20% of consumers consider installation and total running costs their main priorities. |
A mesh node is only useful if it has a reliable connection to another node. A claimed coverage area doesn’t necessarily tell you how well the connection will work in your converted attic, so check it where you work.
A mesh network doesn’t create backups. VeiligInternetten explains that backups are copies that can be stored on a server, in the cloud or on an external storage device, for example. The Dutch Data Protection Authority recommends using your work server for sensitive work documents wherever possible.
Your home’s layout and floors affect the connection. A stated coverage area won’t tell you whether the mesh nodes can reach one another properly in their planned locations.
Work out where the nodes can go and test the connection between them, not just the Wi-Fi signal in your workspace.
According to TP-Link, filtered extension leads or converters can interfere with the powerline signal. Performance also depends on your electrical wiring.
Plug a Deco PX50 directly into a wall socket and test whether the connection works in the chosen location before relying on it.
A mesh network provides a connection, but it doesn’t determine where your work documents are stored or who can access them.
Before you start, check which storage locations you’re allowed to use for work files and what access arrangements apply.
The Joybuy listing for the Deco PX50 states that each unit has one Ethernet port, while TP-Link lists three gigabit ports for the PX50. This difference may matter if you want to connect devices by cable.
Before you buy, check the connections on the exact version with both the retailer and the manufacturer.
The Deco X50 and PX50 offer different ways to connect mesh nodes in an attic setup: Ethernet backhaul with the X50, and a combination of Wi-Fi and powerline with the PX50.
The ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh option to compare if you want to explore wired backhaul and the choice between router and access point modes.
The Orbi 370 series is a dual-band Wi-Fi 7 mesh option to compare if you’re looking at expandable coverage and wired connections.
This selection features mesh kits for home networks. For each exact version, check which backhaul options, connections and pack size suit your attic and backup setup.
Image unavailable
Worth considering if you want the option to choose between wired and wireless backhaul; check which connections are available on the exact version.
Image unavailable
A mesh kit with two nodes to consider; check which backhaul options and connections are available on this version.
Tri-band Wi-Fi 7 (2.4 GHz, 5 GHz and 6 GHz).
Image unavailable
Worth considering if you can run a cable between the mesh nodes; check the backhaul support for the exact version.
Dual-band Wi-Fi 7 (2.4 GHz and 5 GHz).
Image unavailable
A set with three mesh nodes to consider if you want to connect several areas of your home; check the backhaul options for this version.
Dual-band Wi-Fi 5 (2.4 GHz and 5 GHz).
Image unavailable
A mesh kit with two nodes to consider; check which connection between the nodes and which expansion options will suit your setup.
Tri-band Wi-Fi 7 (2.4 GHz, 5 GHz and 6 GHz).
No. Mesh connects devices, but you need to set up a separate backup to a suitable storage location. For sensitive work documents, the Dutch Data Protection Authority recommends using your work server wherever possible.
For the Deco PX50, TP-Link recommends plugging it directly into a wall socket, as filtered extension leads or converters can interfere with the powerline signal. Also check that the connection works with your home’s electrical wiring.
Yes, if your chosen mesh system supports a suitable access point mode. Check the mode and follow the manufacturer’s connection instructions for your setup.
Wireless equipment placed on the market in Europe must meet the applicable radio equipment requirements and carry a CE mark. The Dutch Authority for Digital Infrastructure outlines these product requirements. Check the marking on the device you receive, as a product page can’t verify the individual item.
You may be covered by the statutory guarantee: if a product is faulty, the retailer must resolve the problem free of charge, for example by repairing or replacing it, or issuing a refund where appropriate. ACM ConsuWijzer explains that there is no fixed, general guarantee period; the expected lifespan depends in part on the product and how it is used.