Who is this setup for?

Managing a screen on another floor

You want the shared screen to be accessible, so you check whether a network cable runs to that floor and whether the screen or streaming device can be connected by cable. TP-Link describes wired connections between mesh nodes as an option when cables are available.

Casting from several floors

You want to be able to find the screen from a phone or another device. For Cast, Google recommends connecting the controlling device and the screen or streaming device to a Wi-Fi network where AP isolation is turned off.

Managing a property without network cables

You compare wireless backhaul with powerline, taking the layout, floors and electrical wiring into account. TP-Link specifies requirements for the sockets and consumer unit when using Powerline Deco; ASUS describes a band on the ZenWiFi AX (XT8) that can be set aside for backhaul.

What should you look for when choosing?

First, decide how the mesh nodes will connect to each other. Then check how the screen connects and whether your existing router and network settings will work with your chosen setup.

What to consider What should you check? Who is this important for?
Connection between floors Check whether network cables are already in place and where the mesh nodes could go. Compare ethernet backhaul, wireless backhaul and powerline based on the property’s layout. If I want the screen to remain accessible on another floor, I first check the connection back to the router. Around 36% of consumers give this connection top priority.
Connecting the screen and casting Check the available connection on the screen or streaming device and test the casting method you plan to use. With Google Cast, check the network name and whether AP or client isolation is blocking communication. If I want to find the screen from different devices, I check both the connection and network access. Around 29% of consumers prioritise being able to access the screen.
Installation without cables Test possible locations for the mesh nodes. Only consider powerline after checking the sockets and the electrical layout. If installing new network cables isn’t an option, I want to know whether wireless backhaul or powerline will work in the chosen locations. This is the main purchasing concern for around 21% of consumers.
Management and ongoing costs Check the router or access point mode, the requirements for mesh integration and whether the software features you want come at an extra cost. Compare energy use on a like-for-like basis. If I want to keep my existing router and the system will be on for long periods, I look at compatibility and running costs. Around 14% of consumers put management and ongoing costs at the top of their list.

Common pitfalls

  • Assuming the stated coverage guarantees a connection between floors

    Floors and the placement of mesh nodes affect the connection throughout a property. A stated coverage area doesn’t, on its own, tell you how strong the connection will be on the floor where the screen is located.

    Test possible locations and check the connection by the screen before adding extra nodes.

    If the connection there isn’t good enough, you may still need an extra node or a cable run.

  • Using an isolated guest network for Google Cast

    Google says AP or client isolation can prevent the controlling device from communicating with the Cast device.

    Check your network settings and test whether the screen can be found by the devices you intend to use.

  • Choosing powerline without checking the electrical connections

    TP-Link recommends plugging Powerline Deco directly into a wall socket and using the devices on the same consumer unit.

    Check the connection points on both floors and test the connection in place.

  • Focusing only on the Wi-Fi generation or purchase price

    The Wi-Fi generation alone doesn’t tell you how a particular system will perform in your property. Mesh nodes also stay switched on for long periods, and the software features you want may come with conditions or extra costs.

    Compare the ports, backhaul, terms of use and energy consumption of the complete system. The Consumentenbond includes power consumption in its testing method; TP-Link lists a free basic plan and paid Pro features for HomeShield.

    Factor in ongoing electricity use and check whether the features you want require a paid subscription.

Brands to compare

TP-Link

The Deco models reviewed offer different ways to connect mesh nodes, including ethernet backhaul and G.hn powerline.

  • TP-Link describes ethernet backhaul for the Deco X50-PoE and powerline backhaul for the Deco PX50.
  • With powerline, how well it works depends on the property’s electrical connections and layout.

ASUS

The ZenWiFi AX (XT8) reviewed is a tri-band model worth comparing if you’re considering wireless backhaul.

  • ASUS describes a configurable second 5GHz band for backhaul, as well as support for ethernet backhaul.
  • You’ll need to assess on site whether wireless backhaul will work through the floors of your particular property.

FRITZ!

The FRITZ!Repeater 3000 AX reviewed is an option for extending a compatible existing FRITZ!Box with mesh.

  • The repeater can be connected as a LAN bridge.
  • The manual specifies a FRITZ!Box with FRITZ!OS 7 or later for mesh integration; don’t assume it will integrate in the same way with any router.

NETGEAR

Orbi is another mesh product range to compare if you’re considering several nodes and a different system architecture.

  • NETGEAR offers several configurations in the Orbi range.
  • Compare the specific system and its ports; features of one configuration don’t automatically apply to the entire range.

Joybuy products

This selection includes mesh systems with multiple nodes, including models with ethernet backhaul, tri-band Wi-Fi or PoE. For each model, check that the connections and connection method suit the floors and screen in your property.

ASUS ZenWiFi BT8 mesh system, 2-pack

ASUS ZenWiFi BT8 (2-pack)

An option to compare if you’re looking for a mesh system with two nodes and tri-band Wi-Fi.

The product name lists 2.4GHz, 5GHz and 6GHz bands, Wi-Fi 7 (802.11be) and a white finish.

Joybuy
TP-Link mesh Wi-Fi system, 2-pack

TP-Link AX1800 Mesh Wi-Fi 6 (2-pack)

Suitable if you want to compare a mesh system with two nodes and a wired backhaul option.

The product description lists Wi-Fi 6 and ethernet backhaul.

Joybuy
TP-Link Deco X50 mesh Wi-Fi system, 3-pack

TP-Link Deco X50 (3-pack)

An option if you want to spread three mesh nodes around your property and need ethernet ports on the nodes.

The product description lists Wi-Fi 6 and three Gigabit Ethernet ports per unit.

Joybuy
TP-Link Deco XE75 Pro mesh Wi-Fi system, 3-pack

TP-Link Deco XE75 Pro (3-pack)

Compare this model if you’re considering three mesh nodes, tri-band Wi-Fi and wired connections.

The product description lists 2.4GHz, 5GHz and 6GHz bands, Wi-Fi 6E and three ethernet ports per unit.

Joybuy
TP-Link Deco X50-PoE mesh Wi-Fi system, 3-pack

TP-Link Deco X50-PoE (3-pack)

An option if you want to connect three mesh nodes by cable and are considering PoE for installation.

The product description lists Wi-Fi 6, PoE support and two ethernet ports per unit. TP-Link describes ethernet backhaul for this model.

Joybuy

Frequently asked questions

Why doesn’t my living room screen appear in Google Cast?

Check that the controlling device and the screen or streaming device are connected to the Wi-Fi network you intend to use. Google recommends turning off AP or client isolation, as it can block communication between devices.

Can I keep my existing router when I install mesh?

It depends on the system you choose and how you want to set up your network. TP-Link describes an access point mode for Deco in which the existing router continues to manage the network; check the instructions for the specific model.

Do you need a licence for a standard Wi-Fi network in the Netherlands?

No. The Dutch Authority for Digital Infrastructure gives Wi-Fi as an example of licence-exempt frequency use, with no notification or registration requirement. The conditions for licence-exempt use still apply.

What should I look for to check that a mesh system complies with requirements for the Dutch market?

Radio equipment sold in the Netherlands must meet European requirements for radio equipment and carry the relevant CE marking, as described by the Dutch Authority for Digital Infrastructure. Check the marking and information for the specific model; a product listing alone is not an independent conformity assessment.

Which ongoing costs should I compare?

Compare the energy use of the complete system and check whether the software features you want come at an extra cost. The Consumentenbond includes energy use in its testing method; TP-Link lists a free basic plan and paid Pro features for HomeShield.