Who is this choice relevant to?

Student with a study at the far end of the house

You want to open shared files in your study. So consider where to place the nodes and whether you can connect them with a cable. The Consumers’ Association explains that Wi-Fi can be assessed in different locations and at different distances.

Colleagues working with large project files

If you move files between computers or network storage at home, consider the connection between the mesh nodes and the Ethernet ports available. TP-Link and ASUS describe the port options on their specific models, but those specifications alone don’t tell you how quickly files will transfer in your home.

Resident with thick walls

If a wireless node struggles to reach your study and you can’t run a network cable, check whether a compatible powerline mesh system is suitable for your home’s electrical wiring.

What should you consider when choosing?

Mesh with Ethernet backhaul

Choose this when: you can run a network cable between the router and the nodes, for example if you regularly transfer files locally.

Bear in mind: the cable route and the ports needed for your modem, mesh nodes and connected devices.

Mesh with wireless backhaul

Choose this when: cabling isn’t practical and you can place an extra node somewhere it can still get a usable connection to the main network.

Bear in mind: distance and obstacles affect the connection. Advertised wireless speeds don’t automatically predict file transfer speeds in your study.

Mesh with powerline backhaul

Choose this when: walls or floors disrupt the wireless connection, cabling isn’t possible, and the nodes can be connected to a suitable electrical installation.

Bear in mind: compatibility varies by model. TP-Link recommends plugging compatible powerline nodes directly into wall sockets.

Improve your existing setup first

Choose this when: better positioning or adjustments to your existing Wi-Fi might be enough, or if you only want to share files between different addresses.

Bear in mind: mesh in one home won’t, by itself, give you internet access to files from another address.

What to consider What should you look for? Who is this important for?
Connection to the study Decide where the nodes and any cables could go, then assess the connection at the intended location. If I want to open files in my study, I need to know whether the node will still get a usable connection to the main network there. Coverage in that room is the top priority for around 36% of consumers.
Transferring project files Check the backhaul and how many Ethernet ports will be free once you’ve connected the necessary equipment. If I regularly move files between computers or network storage, the right backhaul and connections matter. File transfers are the main concern for around 29% of consumers.
Access to shared files Check whether the network mode allows access to the local network, and limit access to what’s needed. If people need to open shared files but guests must remain separate, I’ll check the access settings. This is the top priority for around 21% of consumers.
Buying and managing the system Check how many nodes are included in the exact package and which components or updates you’ll need to manage yourself. If I don’t want to buy extra components or take on management tasks I don’t need, I’ll compare what’s included and how the system is managed first. This is the top priority for around 14% of consumers.

Common pitfalls

  • Assuming the advertised Wi-Fi speed is the same as file transfer speed

    The connection between the nodes and the ports are also part of the route. The Consumers’ Association describes tests carried out in different locations and at different distances.

    First compare the backhaul options that are practical for you and the ports available. Then assess the connection in your own setup.

  • Assuming all Deco powerline models work together

    According to TP-Link, the PX50 does not provide powerline backhaul with the Deco PX10, P7 or P9.

    Check the full model names and powerline compatibility of all the nodes. TP-Link recommends plugging compatible nodes directly into wall sockets.

  • Using a guest network without checking local access

    A device can be connected to Wi-Fi and still be unable to access shared resources on the internal network.

    Check the local network access settings and don’t give participants more access than they need.

  • Checking only the ports on the main router

    Linksys specifies Ethernet ports for the LN1100 router, but no Ethernet port for the LN1200 node.

    Check where you can connect your computer or storage to each component in the exact set. Otherwise, you may still need another node or cabling in the room at the far end of the house.

Brands to compare

TP-Link

The Deco X50 offers mesh with optional Ethernet backhaul, while the Deco PX50 uses a separate powerline mesh setup.

  • TP-Link specifies three gigabit ports per X50 and PX50 node.
  • According to TP-Link, the PX50’s G.hn powerline backhaul isn’t compatible with the Deco PX10, P7 or P9. Check the limitation for each model.

ASUS

The ZenWiFi BD4 is worth comparing if you’re looking for two 2.5G Ethernet ports per node and wired backhaul.

  • ASUS describes two 2.5G Ethernet ports per node and an option for wired backhaul.
  • These are BD4 specifications, not measured file transfer speeds. Check the pack size too: a 2-pack and a 3-pack don’t include the same number of nodes.

FRITZ!

The Mesh Set 1700 is designed for anyone who wants to keep their existing router or modem and extend their coverage.

  • FRITZ! says this set supports use with an existing router and receives automatic updates.
  • Before planning which work areas to connect by cable, check the number of nodes and LAN connections available in the exact set.

Linksys

Velop Micro 6 combines a separate router with compact additional nodes.

  • Linksys specifies four gigabit LAN ports and a 2.5G internet port for the LN1100 router.
  • Linksys doesn’t specify an Ethernet port for the LN1200 node. Check this if you need to connect a computer to the node by cable in the room at the far end of the house.

Mesh systems at Joybuy

These mesh systems are designed for a home network with nodes in different rooms. Before buying, also check the CE marking on the exact model. The Digital Infrastructure Inspectorate states that radio equipment placed on the European market must meet the applicable requirements and carry the required CE marking.

TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50, 3-pack

A set with three mesh nodes to help provide a connection in several areas of your home.

Wi-Fi 6, dual-band on 2.4 GHz and 5 GHz; TP-Link specifies three gigabit ports per X50 node.

Joybuy
TP-Link Deco XE75 Pro mesh system, 3-pack

TP-Link Deco XE75 Pro, 3-pack

The three-node version is worth comparing if you want to connect several areas of your home.

Tri-band Wi-Fi 6E, with 2.4GHz, 5GHz and 6GHz bands; the product information lists Ethernet ports per unit.

Joybuy
TP-Link Deco X50 mesh system, 2-pack

TP-Link Deco X50, 2-pack

A set with two mesh nodes to compare if you’re considering a wired connection between nodes.

Wi-Fi 6, dual-band on 2.4 GHz and 5 GHz; TP-Link lists optional Ethernet backhaul and three gigabit ports per X50 node.

Joybuy

Frequently asked questions

Can I simply put the mesh nodes in my study?

Not without checking the connection to the main node. With wireless backhaul, the additional node needs to get a usable connection of its own. If you can run a cable, compare Ethernet backhaul and the ports you’ll need.

Why can’t my computer see the shared files on the guest network?

Access to the local network may be restricted. ASUS describes an intranet access setting in supported router firmware that lets you allow or block access from a guest network. Check your own equipment’s settings and don’t allow more access than necessary.

Does the Deco PX50 powerline backhaul work with other Deco powerline nodes?

According to TP-Link, it doesn’t work with the Deco PX10, P7 or P9: the PX50 uses G.hn, while these models use a different powerline standard. TP-Link recommends plugging compatible nodes directly into wall sockets on the same electrical installation.

Does mesh also give me access to files from a study at another address?

Not just by extending your home Wi-Fi coverage. Access over the internet requires a separately configured service. For example, Synology describes VPN access to local shared resources for users with a suitably configured NAS.

Can I use my own mesh router with my internet provider?

You can use your own router, subject to the applicable connection and safety requirements. ACM ConsuWijzer covers the choice of your own modem or router. Check the connection details you’ll need if you want to replace your provider’s modem. Using a mesh router behind your existing modem is a different setup.