Which control option is right for you?

For a fixed photo setup

Do you photograph your medals using a tripod and want to avoid touching the camera when taking the shot? First, check that a cable shutter release has the right connection for your camera model. Canon Netherlands and FUJIFILM X Netherlands explain which connections and accessories are compatible with specific models.

For arranging medals between shots

Want to take photos from your workspace without repeatedly going back to the camera? Compare a compatible wireless remote with your camera’s app features. Canon Netherlands and Nikon Netherlands list support for specific camera models.

For trying the built-in timer first

If you’re photographing stationary medals and can wait for the shot, try your camera’s self-timer first. Sony Netherlands describes this feature for certain cameras; the options available depend on the model.

What should you consider when choosing?

Wired remote shutter release

Best for: taking photos from a fixed setup when your camera has the right connection for the cable model you choose.

Bear in mind: the cable limits how far you can move. Check the connector type and whether you need an adapter against the information for your camera model.

Wireless remote shutter release

Best for: staying beside the medals when the manufacturer lists your camera as compatible with the remote you’ve chosen.

Bear in mind: wireless features and controls vary by model; check whether pairing is required too.

App or self-timer

Best for: when your camera has a suitable app, or you can wait for the timer to run down while photographing a stationary medal.

Bear in mind: a timer gives you less direct control over when the photo is taken; app control depends on your camera.

Consideration What should you check? Who is this important for?
Compatibility Look up your exact camera model and check the connection, adapter requirements or wireless support. If I want to avoid buying a shutter release that doesn’t fit my camera, I’ll check model-specific support first; around 36% of consumers say compatibility is their main concern when buying.
Taking photos without touching the camera Check that the control works with your camera and that the cable is long enough for where you’ve placed your tripod. If I don’t want to touch my camera for a close-up, I’ll look for a way to take the shot remotely; around 29% of consumers give taking photos with minimal camera shake their highest priority.
Taking photos from your workspace Check wireless compatibility and compare the remote with your camera’s app features. If I want to rearrange the medals between shots without walking over to the tripod, I want to take photos from my workspace; around 21% of consumers say controlling the camera beside their subject is their main consideration.
Avoiding an extra accessory Try the self-timer in your own setup and see whether waiting fits your routine. If I’m photographing a stationary medal, I can wait for the timer before buying a separate shutter release; around 14% of consumers want to try their camera’s existing features first.

Common buying mistakes

  • Assuming every shutter release from the same brand will fit

    Connections and compatibility lists vary by model. For example, Canon distinguishes between E3 and N3 connections, while Fujifilm lists a separate adapter for certain RR-100 combinations.

    Before buying, check your exact camera model, connector type and any adapter requirements.

  • Buying a wireless shutter release before trying the timer

    If the medal isn’t moving, you may be able to wait for the self-timer. Some cameras also offer app control, depending on the model.

    Try the available features in your own photo setup first and see whether waiting suits the way you work.

  • Assuming a shutter release will solve every problem with blur

    Taking the shot remotely means you don’t touch the camera when pressing the button, but it won’t automatically stabilise your entire setup.

    Also check that your camera is stable and that the medal is well lit.

Brands to consider

Canon

Canon offers wired shutter releases with different connections, as well as the BR-E1 Bluetooth remote for listed compatible cameras.

  • Canon lists an E3 connection and an 80 cm cable for the RS-80E3; the RS-80N3 uses an N3 connection.
  • A Canon camera isn’t automatically compatible with every Canon accessory. Check support for your exact model.

Fujifilm

The wired RR-100 is an option for the X and GFX cameras listed by Fujifilm on its product page.

  • Fujifilm lists an included L-shaped 2.5 mm extension cable.
  • For the X-S10 and X-T200, Fujifilm lists a separate 2.5 mm to 3.5 mm adapter. Check the connection on your own model.

Nikon

The ML-L7 is a Bluetooth remote for specific Nikon cameras; Nikon lists the Z 30 among them.

  • Nikon lists separate buttons for taking photos and recording video.
  • The ML-L7 isn’t designed for every Nikon camera. Check whether your exact model is supported.

Sony

Sony describes the RMT-P1BT Bluetooth remote and lists the self-timer as an alternative on supported cameras.

  • According to Sony, the RMT-P1BT uses the built-in Bluetooth receiver in a compatible camera, so no extra receiver is needed.
  • Self-timer and remote-control features vary by camera model.

Wireless control products

These Joybuy products offer wireless control for smartphone cameras or the Osmo cameras listed. Before buying, check that the product is suitable for the camera you want to use to photograph your medals.

KINSI selfie stick with tripod, 170 cm and Bluetooth remote

KINSI selfie stick with tripod, 170 cm and Bluetooth remote

The product description mentions remote control of a smartphone camera, for a smartphone setup that lets you stay beside your subject.

The title lists a rotating phone holder for smartphones from 4.7 to 6.0 inches.

View on Joybuy
KINSI foldable smartphone tripod with Bluetooth remote

KINSI foldable smartphone tripod with Bluetooth remote

The product description mentions wireless activation of a compatible smartphone camera, so you can stay beside your subject while taking the shot.

The title lists a foldable, height-adjustable tripod for use on a table or outdoors.

View on Joybuy
Bluetooth remote for Osmo Action 4, Osmo Action 5 Pro, Osmo 360 and Osmo Action 6

Bluetooth remote for Osmo Action 4, Osmo Action 5 Pro, Osmo 360 and Osmo Action 6

The product description mentions taking photos without touching the camera with compatible Osmo cameras.

The title lists compatibility with Osmo Action 4, Osmo Action 5 Pro, Osmo 360 and Osmo Action 6.

View on Joybuy
Ulanzi JJ02 Bluetooth selfie stick and 3-in-1 tripod with remote

Ulanzi JJ02 Bluetooth selfie stick and 3-in-1 tripod with remote

The product description mentions wireless control of a smartphone camera, for taking photos from beside your subject.

The title lists an extendable mini tripod, two cold shoe mounts and support for iPhone and Android.

View on Joybuy

Frequently asked questions

How can you tell whether a cable shutter release will fit your camera?

Check your exact camera model and connection in the manufacturer’s information. For example, Canon distinguishes between E3 and N3 connections, while Fujifilm lists a separate adapter for certain RR-100 combinations.

How do you use a shutter release for portfolio photos of medals?

First, make sure your camera and medal are stable, then take the photo without touching the camera. If you don’t need direct control, try your camera model’s self-timer; Sony describes a 2-second timer on certain cameras to reduce camera shake when using a tripod.

What should you look for in a wireless shutter release?

Check that your camera model supports the remote and whether pairing is required. For example, Nikon says the ML-L7 works with specific cameras, including the Z 30.

What cooling-off period applies to online purchases in the Netherlands?

According to the Dutch Government, in many cases you have 14 days to change your mind when buying online from a business. The applicable terms may vary; a statutory cooling-off period is different from any more generous voluntary returns policy a shop may offer.

What should you look for in a Bluetooth wireless shutter release?

Check support for your camera model and read the information for the specific product. The Dutch Authority for Digital Infrastructure states that radio equipment meeting the applicable European requirements carries a CE marking; a Bluetooth label on its own doesn’t establish whether a product meets those requirements.