Mirrorless camera photographers
If you’re looking for a macro lens for a camera you already own, check the mount and the exact lens version first. The models covered here are designed for different camera systems.
First, check that the lens mount is compatible with your camera. Then choose the magnification based on whether you want to capture the whole figurine or focus on a small detail. A lens with enough working distance can leave room for lighting; the minimum focusing distance is not the same as the clear space between the lens and your subject. A dark background calls for a separate lighting setup, and focus stacking can help when the sculpture’s texture won’t all be sharp in a single shot.
If you’re looking for a macro lens for a camera you already own, check the mount and the exact lens version first. The models covered here are designed for different camera systems.
If you want to light the sculpture’s texture without illuminating the dark background to the same extent, the space between the lens and your subject matters. Sony lists a working distance of approximately 13 cm for the FE 90mm F2.8 Macro G OSS; this figure applies to that specific model.
If you want to make small textures appear larger in the frame, maximum magnification is worth considering. Depth of field matters too when you’re photographing a three-dimensional figurine: Canon describes focus stacking as a technique that combines shots taken at different focusing distances.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Camera compatibility | Check your camera mount and the exact lens version. For example, Sigma offers versions for Sony E and L-Mount. | I want to make sure the lens fits my existing camera first. Around 36% of consumers put compatibility first. |
| Room for lighting | Compare the working distance of the exact model. Sony lists approximately 13 cm for the FE 90mm; the minimum focusing distance is not measured from the front of the lens. | If I want to light the figurine without the lens getting in the way of my lighting setup, the space available matters. Around 29% of consumers prioritise having room to work. |
| Sharpness across the sculpture’s texture | Decide whether one plane of focus is enough, and check whether your camera supports focus bracketing if you want to combine shots taken at different focusing distances. | I want the sculpture’s texture to be sharp from front to back, so I consider the shooting technique too. Around 21% of consumers prioritise sharpness across the figurine. |
| Magnification for detail | Compare the maximum magnification of the exact lens: Canon lists up to 1.4× for the RF 100mm, while Laowa lists 2:1 for the 90mm f/2.8 2x Ultra Macro APO. | Magnification matters more if you mainly want a small ornament or surface detail to fill the frame. Around 14% of consumers put magnification for detail first. |
Minimum focusing distance is measured from the sensor, while working distance is the space between the front of the lens and your subject. These figures therefore don’t tell you the same thing about how much room will be left for lighting.
Where possible, compare the working distance of the exact model and map out the positions of the lens, figurine and lights before choosing.
Your lighting setup might not fit at the distance you want to shoot from.
A higher maximum magnification won’t solve the limited depth of field you get when shooting close up. If you need several parts of the sculpture’s texture to be sharp, you may need a series of shots taken at different focusing distances.
First decide whether you’ll usually photograph the whole figurine or focus on a small detail. If you plan to use focus stacking, allow time for a stable setup and the series of shots.
Combining shots taken at different focus distances takes extra time and requires a stable setup.
The lens doesn’t control how much light falls on the background by itself. Canon explains how flags in a low-key setup can stop light from reaching the background.
Consider the lens and lighting setup separately, and take a test shot of your figurine’s material and texture.
Depending on your setup, you may need background material or light-blocking flags.
The RF 100mm F2.8L Macro IS USM is an option for a compatible Canon RF camera if magnification above 1:1 is important.
The Z MC 50mm f/2.8 and Z MC 105mm f/2.8 VR S offer different focal lengths for compatible Nikon Z cameras.
The FE 90mm F2.8 Macro G OSS is an option for a compatible Sony E camera when space in front of your subject is important.
The 105mm F2.8 DG DN MACRO | Art is a 1:1 option, with separate versions for Sony E and L-Mount.
The 90mm f/2.8 2x Ultra Macro APO is a specialist option if you need magnification beyond 1:1 to capture details.
Not necessarily. Choose the magnification based on how large you want the specific detail to appear in the frame. A whole figurine and a tiny ornament call for different things.
Check whether your camera model supports focus bracketing. This combines shots taken at different focusing distances; Canon recommends using a sturdy tripod for a stable series. It’s a shooting technique, not a feature that every macro lens provides by itself.
No. The background, the direction of the light and how it’s distributed are all part of the setup. Canon explains how flags can stop light from reaching the background; adapt this principle to your own subject and lighting.
When you buy as a consumer in the Netherlands, you’re entitled to a product that works as it should. According to the Dutch government, the seller must provide a solution if there’s a problem; any manufacturer’s warranty is separate from this legal right.
For distance purchases, you generally have a 14-day cooling-off period, and the seller must tell you about it. The Dutch government lists buying online from a private individual, for example, as a situation that doesn’t fall within its examples of distance purchases. So check which terms apply to your purchase before you buy.