Who is this guide for?

Miniature painter looking to show off the details

You want to photograph your paintwork and small components clearly. Look for a reproduction ratio that suits the framing you want; the highest magnification isn’t automatically necessary. Sony Netherlands describes 1:1 as the traditional minimum for macro photography, while Fotografille highlights capturing details as an important consideration when photographing miniatures.

Building a tabletop studio

You position lights or diffusers around stationary figures and want to know how much room there’ll be between the lens and the subject. For the SEL90M28G, Sony Netherlands distinguishes between the minimum focusing distance and the working distance.

Photographing entire figures

You want to capture a complete figure or scene in sharp focus and frame it well. Precise focusing is important for close-ups, where depth of field is limited, as Canon Netherlands points out. For stationary subjects, focus stacking can combine different focus points, as explained by Nikon Netherlands.

What should you look for?

Compact macro lens around 50 mm

Suitable if: you have a compact tabletop setup and the lens mount is compatible with your camera. The NIKKOR Z MC 50mm f/2.8 is one example for Nikon Z.

Bear in mind: Nikon specifies around 5 cm of space in front of the lens at its closest focusing distance for this model, which may leave little room for lighting.

Macro lens around 90–105 mm

Suitable if: you want room around your subject for lighting and your studio has space for a greater distance between the camera and miniature.

Bear in mind: check the working distance of the specific lens. Sony Netherlands specifies around 13 cm for the SEL90M28G at its closest focusing distance.

Lens with more than 1:1 magnification

Suitable if: you want to fill the frame with tiny details and the lens version is compatible with your camera. Canon specifies 1.4× for the RF 100mm; Laowa specifies 2:1 for the 65mm f/2.8 2X Ultra-Macro APO for APS-C.

Bear in mind: extra magnification won’t automatically make an entire figure sharper. Check the depth of field and the exposure you’ll need too.

What to consider What should you check? Who should consider this?
Detail without unnecessary magnification Compare the maximum reproduction ratio of the specific lens with the framing you want. At 1:1, the subject is reproduced at life size on the sensor; at 1:2, it appears half that size, according to Sony Netherlands. If I want to show brushstrokes or small components clearly, I’ll choose magnification to suit my framing. Around 33% of consumers say detail is their main buying concern.
Room for lights and diffusers Check the working distance from the front of the lens at the magnification you want. This isn’t the same as the minimum focusing distance measured from the sensor. I want to light my figure from different angles without the lens getting in the way. Around 27% of consumers put space for lighting first.
Depth of field across the entire figure Consider whether one focus point will be enough or whether you can combine several focus steps. Check the capabilities of your camera and software. If protruding parts are at different distances, I want to know whether a single shot will be enough. Around 20% of consumers name depth of field as their main buying concern.
Compatibility with your camera Note your camera model, mount and sensor size, then check the exact lens version with the manufacturer and retailer. I want a version that actually fits my camera system, not just a lens with the right magnification. For around 20% of consumers, system compatibility is their top priority.

Common buying mistakes

  • Confusing the minimum focusing distance with the clear space in front of the lens

    The minimum focusing distance is measured from the sensor plane; the working distance is the space from the front of the lens.

    Sketch out your setup and check the working distance of the specific lens at the magnification you want to use.

  • Assuming that every lens labelled ‘macro’ offers 1:1 magnification

    The maximum reproduction ratio varies between lenses. According to Sony Netherlands, at 1:2 a subject is reproduced on the sensor at half the size it is at 1:1.

    Check the maximum reproduction ratio in the specifications and let the composition you want determine how much magnification you need.

  • Buying more magnification to fix blurred protruding parts

    Depth of field is limited at short shooting distances. Extra magnification won’t solve this on its own.

    First, test your focusing and exposure. With a stationary miniature, you can try combining several focus points; Nikon Netherlands describes focus stacking as a way to increase depth of field.

    Taking and processing multiple shots takes extra time.

  • Assuming lens versions with the same focal length are interchangeable

    A lens may be designed for a specific mount or sensor size. Sigma lists Sony E and L-Mount for its 105mm DG DN Macro; Laowa describes the 65mm 2× as an APS-C lens.

    Before choosing a version, compare the full model name, mount and sensor size with your camera model.

Brands to consider

Canon

For Canon RF cameras, Canon specifies a maximum magnification of 1.4× for the RF 100mm F2.8L Macro IS USM.

  • The specified closest focusing distance is 0.26 m.
  • This distance is measured from the sensor and doesn’t directly tell you how much clear space there is in front of the lens.

Nikon

The Nikon Z MC 50mm f/2.8 and Z MC 105mm f/2.8 VR S are examples of macro lenses for Nikon Z.

  • For the 50mm, Nikon specifies around 5 cm of space in front of the lens at its closest focusing distance.
  • A Nikon Z lens isn’t a universal solution for cameras with a different mount. Check that there’s enough room for your lighting too.

Sony

According to Sony’s specifications, the Sony FE 90mm F2.8 Macro G OSS is a 1:1 option for Sony E cameras.

  • Sony Netherlands specifies a minimum focusing distance of 0.28 m and a working distance of around 13 cm for this model.
  • Optical stabilisation doesn’t change the limited depth of field in close-ups.

Sigma

Sigma lists the 105mm F2.8 DG DN Macro | Art as a full-frame 1:1 lens for Sony E or L-Mount.

  • The specified closest focusing distance is 29,5 cm.
  • Dimensions vary by mount, so check which version is compatible with your camera.

Laowa

Laowa specifies magnification of up to 2:1 for the 65mm f/2.8 2X Ultra-Macro APO for APS-C.

  • The maximum magnification may be useful if you want to fill the frame with very small details.
  • The specified 17 cm is the minimum focusing distance, not the working distance. Check the mount and sensor size too.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Does a macro lens always need to offer 1:1 magnification to photograph an entire painted figure?

No, 1:1 isn’t necessary for every composition. The ratio describes how large the subject appears on the sensor. First decide how much of the frame you want the whole figure or the detail to fill. Sony Netherlands describes 1:1 as the traditional definition of a macro lens.

How can you get the protruding parts of a stationary miniature in focus?

Focus carefully on the most important detail and assess the depth of field with a test shot. If one shot isn’t enough, you can take photos with different focus points and combine them. Check which steps your camera and software support. Nikon Netherlands describes this technique as focus stacking.

What should you consider when checking the distance between your lens and the miniature?

Check the working distance of the specific lens at the magnification you want to use. The minimum focusing distance is measured from the sensor plane, so it doesn’t tell you how much space will be left in front of the lens for lights or diffusers.

What are your rights if a lens bought online isn’t right?

For an online consumer purchase in the Netherlands, you’ll generally have up to 14 days after delivery to change your mind, subject to legal exceptions. In addition, if a product doesn’t perform as you could reasonably expect under normal use, the seller must put this right in accordance with the law. ACM ConsuWijzer explains both the cooling-off period and the statutory guarantee.