Photographers of whole paperweights
You want to fit the entire glass object in the frame and may have limited room for your camera and artificial lighting. So check that the lens mount is compatible and that your setup has enough space.
First, choose a lens version with the right mount, then decide whether you want to photograph the whole paperweight or its tiny inclusions. A compact lens may suit a tight setup, while a macro lens of around 90–105 mm can leave more room in front of the lens for artificial lighting. Neither option will automatically solve reflections or limited depth of field.
You want to fit the entire glass object in the frame and may have limited room for your camera and artificial lighting. So check that the lens mount is compatible and that your setup has enough space.
You want to capture tiny inclusions or surface textures at a large scale. Compare magnification and working distance, and consider whether you want to focus manually.
You want to reduce bright reflections in the glass without losing sight of its outline or details. The position and shape of the light, as well as your chosen focusing method, also matter.
Best for: a compact setup and a compatible Fujifilm X camera. Fujifilm specifies 1:1 magnification for the XF30mmF2.8.
Bear in mind: Fujifilm says that at the minimum focusing distance, the subject is close to the front of the lens, which can limit the space available for lighting.
Best for: a compatible camera mount and a setup where you want to leave room around the glass for artificial lighting. Sony, Sigma and Nikon specify a maximum of 1:1 for the models mentioned; Canon specifies up to 1.4× for the RF 100mm.
Bear in mind: photographing the whole object in a small space may require more room behind the camera. The models have different mounts and are not interchangeable.
Best for: tiny inclusions or surface details that you want to magnify further. Laowa specifies up to 2× magnification for the 100mm F2.8 CA-Dreamer.
Bear in mind: this model has manual focusing, and versions vary by mount. For close-ups, you may need to take a series of shots if you want more depth in focus.
| Consideration | What to look for | Who should consider this? |
|---|---|---|
| Compatibility | Compare your camera model, mount and the full name of the lens version. | If you want to keep using your current camera, start with the mount; around 31% of consumers prioritise compatibility. |
| Working space and reflections | Check the working distance at your desired magnification and test the light source’s position and diffusion. | When you need to position lights around reflective glass, the space in front of the lens matters; around 25% of consumers prioritise working space and reflection control. |
| Magnification and framing | Decide whether you want to show the whole object or a small detail, then compare this with the maximum magnification. | Want to know in advance whether a lens can frame both the object and its tiniest inclusion appropriately? Around 25% of consumers prioritise their desired framing. |
| Depth of field and focusing | Decide whether one shot will be enough or whether you’ll need a focus stack; check that this approach works with your camera and editing workflow. | If you also want to capture the depth of the glass object in focus, a series of shots may be useful; around 19% of consumers start with sharpness and their focusing method. |
A lens that magnifies tiny details significantly isn’t automatically the most practical choice for photographing an entire paperweight. The mount must also be compatible with your camera.
First, check your camera mount and the framing you want. Then compare the magnification and the space you’ll need for your setup.
According to Fujifilm, at the minimum focusing distance with the XF30mmF2.8, the subject is close to the front of the lens. This can make it harder to position artificial lighting.
Compare the working distance at the magnification you want to use, not just the distance from the sensor.
In an example involving engraved glass, a softbox evened out the light, but made the engraving almost invisible until the lighting setup was adjusted.
Try changing the position and diffusion of the light before attributing reflection control to your choice of lens.
The FE 90 mm F2.8 Macro G OSS is an option for photographers with a compatible Sony E camera who want 1:1 macro and in-lens stabilisation.
The RF 100mm F2.8L Macro IS USM is designed for a compatible Canon RF camera.
The NIKKOR Z MC 105mm f/2.8 VR S is a 1:1 option for a compatible Nikon Z camera.
The 105mm F2.8 DG DN MACRO | Art is a 1:1 option available in separate Sony E and L-Mount versions.
The 100mm F2.8 CA-Dreamer Macro 2X is a manual option for anyone who wants to capture very small details at greater than 1:1 magnification.
Not necessarily: maximum magnification mainly indicates how large a small detail can appear on the sensor. First, decide how you want to frame the shot and check that it works with your setup.
A polarising filter can reduce unwanted reflections, but the results depend on the shot. Nikon explains that the filter can sometimes reduce or eliminate reflections. Also try changing the position of the camera and light source, as a reflection can help reveal the shape of the glass.
Depth of field is shallow when focusing at close range. You can take several shots at different focus distances and combine them; Canon describes this technique as focus stacking. Check whether your camera has the required feature or use suitable editing software.
According to the Dutch Government, there is no fixed statutory guarantee period in the Netherlands; you can expect a product to meet what you could reasonably expect of it. For a qualifying distance purchase, you generally have a 14-day cooling-off period. Check the terms and any exceptions that apply to your purchase.