Who is this guide for?

Detail-focused maker

If you want to capture engravings, cutting edges or material textures in close-up, compare the maximum magnification of the exact lens variant. Canon Netherlands lists 1:2 for the RF 35mm F1.8 MACRO IS STM; Nikon Netherlands lists 1:1 for the NIKKOR Z MC 50mm f/2.8.

Photographer with a compact lighting setup

If you’re shooting on a table, the space in front of the lens can affect where your lights and hands will fit. For the NIKKOR Z MC 50mm f/2.8, Nikon Netherlands lists around 5 cm between the front of the lens and the subject at the closest focusing distance. Check how this works with your own lighting setup.

Catalogue photographer

If you alternate between overview shots and close-ups, check that your chosen lens is compatible with your camera and gives you the framing you need. For tools with depth, you could take a series of shots at different focus points; Nikon describes combining them as focus stacking.

What should you look for when choosing?

Start with your camera’s mount, then compare the magnification you need with the space required for your lighting.

What to consider What to look for when buying Who should prioritise this?
Filling the frame with small details Check the maximum magnification of the exact lens variant and make sure its mount is compatible with your camera. If I want to capture a small engraving or cutting edge in close-up, maximum magnification comes first. Around 33% of consumers make detail magnification their top buying priority.
Room for lighting Measure your setup and distinguish between the focusing distance and the clear space in front of the lens. When I need to position lights around tools on a small table, I want to know how much room the lens setup leaves. Around 27% of consumers give lighting placement top priority.
Framing whole tools and details Decide which overview and close-up shots you need, then compare them with the focal length, magnification and mount. If I switch between photographing a whole tool and a small detail, I look for a lens that works for both types of shot. Around 20% of consumers say this versatility is their main buying priority.
Sharpness throughout the tool’s depth Check whether your camera and workflow can handle multiple shots taken at different focus points. When I want a tool lying at an angle to look sharp at different depths, I also consider whether focus points can be combined. Around 20% of consumers put depth of field first.

Common buying mistakes

  • Assuming every macro lens offers 1:1 magnification

    Canon Netherlands gives the Canon RF 35mm F1.8 MACRO IS STM a maximum magnification of 1:2, while Nikon Netherlands lists 1:1 for the NIKKOR Z MC 50mm f/2.8. This difference could determine whether a very small detail appears large enough in the frame.

    Compare the maximum magnification of the exact model with the smallest detail you want to photograph.

  • Confusing focusing distance with clear working space

    For the NIKKOR Z MC 50mm f/2.8, Nikon Netherlands gives around 5 cm between the front of the lens and the subject at the closest focusing distance. Your lights need to fit in that space too.

    Check the distance in front of the lens at the magnification you want to use, and compare it with your lighting setup.

  • Expecting one focus point to keep a deep tool sharp throughout

    With an angled or deep subject, one focus point may not be enough to achieve the sharpness you want across the whole subject. Focus stacking combines shots taken at different focus points, as Nikon describes.

    If sharpness across multiple depths matters, check whether your camera and editing workflow can handle a series of shots like this.

    Taking and combining multiple shots requires extra time for shooting and editing.

Relevant brands to consider

Canon

Canon offers, among other options for the RF mount, a 35mm close-up lens and a 100mm macro lens, with different maximum magnifications.

  • Canon Netherlands lists a maximum of 1:2 for the RF 35mm F1.8 MACRO IS STM and up to 1.4× for the RF 100mm F2.8L Macro IS USM.
  • The 35mm version doesn’t offer 1:1 magnification. Check the RF mount and the magnification of the exact model for your camera and subject.

Nikon

The NIKKOR Z MC 50mm f/2.8 is a 1:1 macro lens for compatible Nikon Z cameras.

  • Nikon Netherlands lists 1:1 magnification and around 5 cm between the front of the lens and the subject at the closest focusing distance.
  • This short distance can affect where you position a light, so check the space available in your own setup.

Sony

Separate 90mm and 100mm macro lens variants are available for Sony E cameras.

  • Sony Netherlands lists 1.0× for the FE 90mm F2.8 Macro G OSS and up to 1.4× for the FE 100mm F2.8 Macro GM OSS.
  • These are different models. The 100mm’s higher maximum magnification doesn’t automatically make it a better fit for every studio setup.

Sigma

The 105mm F2.8 DG DN MACRO | Art is available in separate versions for Sony E and L mounts.

  • Sigma lists a maximum magnification of 1:1. Make sure the mount you choose matches your camera.
  • Sigma specifies that the teleconverters mentioned for this model are only compatible with the L-mount version.

Fujifilm

The XF80mmF2.8 R LM OIS WR Macro is a 1× macro lens for the Fujifilm X system.

  • Fujifilm lists a maximum magnification of 1×.
  • The stated focusing distance of 25 cm is measured from the camera’s reference plane; it isn’t the same as the clear space in front of the lens. Check the framing and lighting in your studio.

Macro lenses at Joybuy

Related products coming soon.

Frequently asked questions

Will every macro lens fit your camera?

No. The lens mount must be compatible with your camera. Check the exact variant: Canon RF, Nikon Z, Sony E, Fujifilm X and the different Sigma mounts are not interchangeable.

How can you get a tool lying at an angle sharp at different depths?

If your camera and workflow allow it, you can take shots at different focus points and combine them afterwards. Nikon describes this technique as focus stacking; it isn’t a guaranteed feature of every lens or camera.

What can you do if a lens you bought online doesn’t meet your expectations?

In the Netherlands, consumers buying online from a business generally have 14 days from delivery to change their mind, as explained by ACM ConsuWijzer. Exceptions may apply; this doesn’t necessarily cover business purchases or purchases from private sellers.

Do you need to contact the manufacturer about your statutory guarantee?

No. According to ACM ConsuWijzer, if a product is faulty despite being used normally, the retailer is responsible for the statutory guarantee. A manufacturer’s guarantee doesn’t replace those rights.