Who is this for?

Collector focused on button details

You want to capture marks, texture or wear accurately, and decide how much magnification you need based on the button and your camera. Canon Europe and Laowa Netherlands describe lens options with different maximum magnifications.

Photographer with a compact lighting setup

You photograph stationary buttons indoors and need space in front of the lens for lighting and a stable camera setup. Nikon Netherlands explains how close the front of a macro lens can get to the subject, while Canon Europe discusses additional macro lighting.

Buyer looking for one versatile lens

You want to photograph whole buttons as well as other subjects, and weigh everyday versatility and size against maximum magnification. Nikon Netherlands and OM SYSTEM describe 1:1 macro options for different camera systems.

What should you look for when choosing?

Versatile 1:1 macro lens

Choose this if: you want to photograph whole buttons and details with a compatible camera, and don’t need 2:1 magnification. Nikon Netherlands lists 1:1 for the Z MC 105mm; Sony and Sigma list 1:1 for their respective 90mm and 105mm models.

Trade-off: the minimum focusing distance doesn’t tell you how much working space will remain in front of the lens for a lamp or diffuser.

Higher magnification for tiny details

Choose this if: you need a small mark to appear larger with a compatible camera. Canon specifies up to 1.4× magnification for the RF 100mm; Laowa lists 2:1 for its manual 100mm model with a Nikon Z mount.

Trade-off: Laowa’s Nikon Z model is fully manual. At high magnifications, focusing, depth of field and lighting placement all need extra attention.

A lens for buttons and everyday photography

Choose this if: you have a Nikon Z camera and want to use a 1:1 macro lens for subjects beyond buttons, or use a Micro Four Thirds camera. Nikon lists 1:1 for the Z MC 50mm; OM SYSTEM lists 1:1 for the 60mm F2.8 Macro.

Trade-off: the systems aren’t interchangeable. Nikon states that at the closest focusing distance, there’s approximately 5 cm between the front of the lens and the subject, which may limit space for lighting.

What to consider What to look for Who it matters more to
Camera compatibility Check the exact mount and lens model. For example, Sigma offers the 105mm mentioned here in separate Sony E and L-Mount versions. I want to make sure the lens fits my camera before comparing magnification. Around 28% of consumers prioritise compatibility.
Magnification and framing Compare the maximum magnification of the exact model with the framing you want. Canon specifies up to 1.4× for the RF 100mm, while Laowa lists 2:1 for the Nikon Z model. If I want to capture a small mark, framing matters more than photographing the whole button. Around 22% of consumers prioritise magnifying details.
Space for artificial lighting Check how much working space there is between the front of the lens and the button at the magnification you’ll use. The minimum focusing distance isn’t the same as the working distance. When using artificial light, I want enough room for my lamp and to position the lens so it doesn’t cast a shadow on the subject. Around 22% of consumers give lighting setup and working space top priority.
Depth of field Check whether your camera supports focus bracketing or lets you set multiple focus points manually. A tripod helps keep the sequence stable. When I want to capture the relief across the button sharply, depth of field and a stable setup are my main priorities. Around 17% of consumers put this need first.
Use beyond macro photography Consider the lens and how you intend to use it more generally, but check separately that its mount is compatible with your camera system. If I want to use the same lens for other subjects, versatility matters alongside macro magnification. Around 11% of consumers put this versatility first.

Common buying mistakes

  • Confusing minimum focusing distance with working distance

    The minimum focusing distance isn’t measured as the clear space in front of the lens. For the Z MC 50mm, Nikon Netherlands states that there’s approximately 5 cm between the front of the lens and the subject at the closest focusing distance.

    Check how much space the lens actually leaves for your lighting setup at the magnification you want.

    You may need to reposition the lamp or diffuser to keep the area in front of the lens clear.

  • Assuming higher magnification automatically means better button photos

    Higher magnification is most useful when small details would otherwise appear too small in the frame. At high magnifications, focusing and depth of field need more attention, and focus stacking may require additional shots.

    Choose extra magnification only if it’s needed for the framing you want and you can set focus and exposure carefully. Canon Europe describes focus stacking as a series of shots taken at different focusing distances.

    A series of shots takes extra time to focus and expose, and may also need to be merged.

  • Choosing a lens based only on focal length or brand

    The same Sigma 105mm range is available with separate Sony E and L-Mount fittings; the model name alone doesn’t make these versions interchangeable.

    Before ordering, compare the full lens name and mount with your camera model.

    If the version isn’t compatible, you may not be able to use the lens with the camera you had in mind.

  • Treating actual and equivalent magnification as the same measurement

    OM SYSTEM lists both actual 1:1 magnification and 2× in 35mm-equivalent terms for the 60mm F2.8 Macro. These are different ways of measuring magnification.

    Compare magnification figures on the same basis, and also consider how the framing you want will look on your camera’s sensor.

Brands to consider

The models mentioned use different camera mounts and offer different magnifications, so always check that the exact model is compatible with your camera and lighting setup.

Canon

The RF 100mm F2.8L Macro IS USM is designed for a compatible RF camera and offers up to 1.4× magnification, according to Canon.

  • Canon lists autofocus and image stabilisation for this lens.
  • At 1.0×, Canon specifies 2 stops of optical stabilisation under its own test conditions. The general figure of up to 5 stops doesn’t apply across the board in this macro situation.

Nikon

For Nikon Z cameras, the Z MC 105mm f/2.8 VR S and Z MC 50mm f/2.8 offer two 1:1 macro options with different focal lengths, according to Nikon Netherlands.

  • Nikon lists built-in VR for the Z MC 105mm.
  • At the closest focusing distance of the Z MC 50mm, Nikon states there’s approximately 5 cm between the front of the lens and the subject. Check whether there’s enough space for your artificial lighting.

Sony

According to Sony Netherlands, the FE 90mm F2.8 Macro G OSS is a 1:1 lens with an E-mount.

  • Sony lists optical image stabilisation for this model.
  • The stated minimum focusing distance of 0.28 m isn’t the same as the clear space in front of the lens.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art offers 1:1 magnification in separate Sony E and L-Mount versions.

  • The manufacturer lists a minimum focusing distance of 29.5 cm for this lens.
  • This isn’t the working distance. Sigma specifies higher magnification with particular teleconverters only for the L-Mount version.

Laowa

The Laowa 100mm f/2.8 2X Ultra-Macro APO is available with a Nikon Z mount, among others, and is designed to offer up to 2:1 magnification, according to Laowa Netherlands.

  • Laowa lists a minimum focusing distance of 24.7 cm at 2:1.
  • The Nikon Z version is fully manual. The minimum focusing distance doesn’t tell you how much clear space will remain in front of the lens.

OM SYSTEM

According to OM SYSTEM, the M.Zuiko Digital ED 60mm F2.8 Macro is a 1:1 lens for a compatible Micro Four Thirds system.

  • OM SYSTEM lists a weight of 185 g.
  • The 2× figure in 35mm-equivalent terms uses a different measurement basis from the actual 1:1 magnification.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I always need 1:1 magnification to photograph an antique button?

No. Choose the magnification based on the framing you want. Less magnification may be enough for a whole button, while a small mark may need to fill more of the frame. Maximum magnification is achieved at the corresponding focusing distance.

How can I stop the lens from blocking my artificial light?

Check how much space will remain in front of the lens at the magnification you want to use, then adjust your lighting setup accordingly. For the Z MC 50mm, Nikon Netherlands states that there’s approximately 5 cm between the front of the lens and the subject at the closest focusing distance. Canon Europe describes additional macro lighting for close-ups.

How can I get more of a button’s raised detail in focus?

If necessary, take several shots of a stationary button, each with a different focus point, then combine them. A stable tripod helps keep the images aligned. Check whether your camera model supports focus bracketing or has a suitable stacking feature.

Can I return a lens bought online in the Netherlands?

For many online purchases from a business, you have a 14-day cooling-off period, according to the Dutch government. There are exceptions, and the government also distinguishes between buying from a business and buying from a private individual. Check who the seller is and which terms and conditions apply to your purchase.

Is the manufacturer’s warranty my only right if the lens develops a fault?

No. According to the Dutch government, the seller must provide a solution if a product is faulty. There’s no fixed statutory warranty period for every product in the Netherlands; a manufacturer’s warranty is in addition to your statutory rights.