Who is this guide for?

Photographers with an existing camera body

You want to make sure the lens fits your camera first. The models covered are available in different mounts, as specified by Canon, Nikon, Sony and Sigma.

Miniature photographers using table lighting

You photograph stationary figures under artificial light and need to make space for your subject and light in front of the lens. Nikon states that the Z MC 50mm leaves around 5 cm of working distance in front of the lens at its minimum focus distance.

Photographers capturing painted details

You want to fill the frame with small features, so you need to balance magnification against the limited depth of field in close-ups. Canon describes focus stacking as a way to combine images taken at different focus points.

What should you look for in a macro lens?

What to consider What should you check? Who should prioritise this?
Compatible mount Check the exact lens version and camera mount. Also make sure the sensor format suits the framing you want. If I want to keep using my current camera body, I need to make sure the lens mount is right first. Around 33% of consumers rank compatibility with their camera body as their top priority.
Room for artificial light Measure the space between the front of the lens and your subject at the magnification you want. Nikon states that the Z MC 50mm leaves around 5 cm at its minimum focus distance. When photographing a figure on a table, I want enough room between the lens, soldier and light. Around 27% of consumers put space for lighting first.
Magnification for details First decide how you want to frame your subject. Canon specifies up to 1.4× magnification for the RF 100mm, while Laowa lists 2:1 for its 65mm APS-C version. For tiny painted details, I want to know whether they’ll appear large enough in the frame. Around 20% of consumers make detail magnification their top buying priority.
Depth of field Take test shots at different apertures and check whether your camera supports focus bracketing. Canon describes focus stacking as combining images taken at different focus points. When I photograph a three-dimensional figure, I want more than just the front to be in focus. Around 20% of consumers say sharpness across the whole figure is their main consideration.

Common buying mistakes when photographing miniatures

  • Focusing only on focal length

    Lenses with similar focal lengths may be made for different mounts. For example, Sigma makes separate E-mount and L-mount versions of its lens.

    Before comparing other specifications, check the full lens model designation and your camera’s mount.

  • Confusing minimum focus distance with working distance in front of the lens

    Minimum focus distance is not the same as the distance from the front of the lens to the figure. When working close up, there may be little room left for a light.

    Measure the distance from the front of the lens at the magnification you want to use, and check that your lighting will fit.

  • Assuming a wide aperture will keep the whole figure in focus

    At short shooting distances, depth of field can be shallow, leaving only part of a three-dimensional figure in focus.

    Start with a stable setup and take a test shot. If one image doesn’t give you enough depth of field, you can combine several focus points using focus stacking.

    Focus stacking requires multiple shots and extra processing time.

Camera brands and macro lenses to consider

Canon

The RF 100mm F2.8L Macro IS USM is an option for photographers with a compatible Canon RF camera who want to magnify small details.

  • Canon specifies up to 1.4× magnification.
  • The minimum focus distance is 0.26 m; this doesn’t tell you how much space there is from the front of the lens.

Nikon

The Z MC 50mm f/2.8 and Z MC 105mm f/2.8 VR S offer different focal lengths for Nikon Z cameras.

  • Nikon specifies 1:1 magnification for both models covered.
  • For the 50mm, Nikon states that the distance between the front of the lens and the subject is around 5 cm at the minimum focus distance. Bear in mind that this leaves limited room for artificial light; this distance does not automatically apply to the 105mm.

Sony

The FE 90mm F2.8 Macro G OSS is an option covered for a compatible Sony E camera.

  • Sony specifies 1.0× magnification and optical stabilisation.
  • The stated minimum focus distance is 0.28 m; this doesn’t measure the space available from the front of the lens in your setup.

Sigma

The 105mm F2.8 DG DN MACRO | Art is available in separate versions for Sony E and L-mount.

  • Sigma specifies a maximum magnification of 1:1.
  • The minimum focus distance is 29.5 cm. Check which mount is compatible with your camera: the E version does not have the same mount as the L version.

Laowa

According to Laowa, the 65mm f/2.8 2x Ultra Macro APO is designed for APS-C cameras and high magnification of fine details.

  • Laowa specifies up to 2:1 magnification.
  • The stated minimum focus distance is 17 cm. This doesn’t guarantee space for a light in front of the lens; also check that a version is available for your camera.

Joybuy lens for close-ups

The Joybuy option shown is a Sony E 50mm lens for close-ups. Check whether its limited magnification is enough for the framing you want for your figures.

Sony E 50mm f/1.8 OSS Black

Sony E 50mm f/1.8 OSS Black

May be suitable for indoor close-ups with a compatible Sony E camera. It isn’t an obvious choice for very small painted details, so check beforehand whether it can achieve the framing you want.

View at Joybuy

Frequently asked questions

Do I need 1:1 magnification if I mainly photograph whole soldiers?

Not necessarily. At 1:1, the subject is reproduced at life size on the image sensor. Choose magnification based on the size of your figure and the framing you want, rather than simply going for the highest number in a product specification.

How can I get the back of a soldier in focus under artificial light?

Start with a stationary, stable setup and test your framing and aperture. If one shot doesn’t give you enough depth of field, you can combine images taken at different focus points using focus stacking. Check what your camera and processing software can do.

What can I do if a lens I bought online turns out to be faulty?

According to the Dutch government, as a consumer you’re entitled to a product that works properly, and you should contact the seller if there’s a fault. The Netherlands has no fixed statutory guarantee period; any manufacturer’s warranty does not replace your legal rights.

Can I return a lens ordered online within 14 days?

According to the Dutch government, for many eligible distance sales from a business, you have a 14-day cooling-off period. Check the information and terms for the specific purchase; buying online from a private individual is different.