Who is this guide for?

Photographers with an existing camera

You’re looking for a macro lens for your current camera and want to avoid choosing an appealing model that won’t fit its mount.

Collectors of tiny fossils

You want to capture a very small fossil or a particular feature at a large enough size, so you’re comparing reproduction ratios rather than focal lengths alone.

Photographers with a fixed lighting setup

You photograph stationary fossils under lights and need to consider the space in front of the lens, reflections and focus across a textured surface.

What should you look for when buying?

First check the camera mount, then work out how much magnification you need. Finally, consider whether the working distance leaves enough room for your lights and shooting setup.

1:1 macro with a shorter working distance

Best for: a compatible Nikon Z camera and a setup where lights can be placed close to the fossil.

Keep in mind: Nikon states that, when focusing very close with the MC 50mm, the distance between the front of the lens and the subject is approximately 5 cm.

1:1 macro around 90–105 mm

Best for: anyone looking for a compatible Sony E, Nikon Z or Sigma model to capture a small fossil at 1:1 on the sensor.

Keep in mind: the mount varies by model. The minimum focusing distance, measured from the sensor, is not the same as the clear space in front of the lens.

Magnification above 1:1

Best for: anyone who mainly wants to make a tiny feature appear large in the frame and can use a version that suits their camera.

Keep in mind: aperture control on the Laowa 100mm varies by mount, so don’t choose based on the maximum magnification alone.

What to consider What to check Who should pay particular attention?
Camera connection Check your camera model, mount, sensor size and the exact lens version. I want a lens that fits my current camera, so I don’t choose a version with a different mount. Around 33% of consumers prioritise compatibility with their existing camera.
Magnification Compare the maximum reproduction ratio with the size of the fossil or detail you want to photograph. I want to capture a small feature so it fills the frame, and I’m choosing magnification based on that detail. Around 25% of consumers prioritise the magnification they need.
Working distance and lighting Check the working distance at your chosen magnification and consider where the fossil, lens and lights will be positioned. I want to light my fossil from the side without the lens getting in the way of the lighting setup. Around 25% of consumers focus on working distance and space for artificial lighting.
Focus across textured surfaces Check whether you can use a stable setup to take shots at different focusing distances, and check which automatic features are available with your camera and lens combination. I want to show several depths of a textured fossil in focus and am prepared to take and process extra shots. Around 17% of consumers prioritise depth of field.

Common pitfalls

  • Confusing minimum focusing distance with working distance

    Minimum focusing distance is measured from the camera sensor. For lights around your subject, it’s the clear space in front of the lens that matters.

    Compare the working distance at the magnification you plan to use. If necessary, sketch out where the lens, fossil and lights will go.

  • Assuming every mount offers the same controls

    According to Laowa, only the Canon EF version of the 100mm f/2.8 2x Ultra Macro APO has a chip and motor for aperture control through the camera; the other mounts listed are operated manually.

    Check the full model name, mount and controls on the version you’re considering.

  • Assuming higher magnification means greater depth of field

    Research into macro photography of small objects describes depth of field as limited at high magnifications. Focus stacking combines several macro shots taken at different focusing distances.

    Choose magnification based on the framing you want. Consider focus stacking separately if you want to show a fossil with different depths in focus.

    Focus stacking takes extra time for a stable setup, multiple shots and image processing.

Brands to consider

Canon

For a compatible EOS R camera, Canon states that the RF 100mm F2.8L Macro IS USM offers up to 1.4× magnification.

  • Under its own test conditions, Canon specifies 2 stops of optical stabilisation at 1.0×.
  • This stabilisation rating doesn’t guarantee the same results in every macro shot. Also check that the RF mount fits your camera.

Nikon

For Nikon Z cameras, the MC 50mm f/2.8 and MC 105mm f/2.8 VR S offer two 1:1 macro options with different shooting distances.

  • Nikon states that the MC 105mm has built-in vibration reduction.
  • When focusing very close with the MC 50mm, Nikon states that there’s approximately 5 cm of space in front of the lens. Check that this works with your lights. Stabilisation doesn’t remove the need to consider depth of field.

Sony

The FE 90mm F2.8 Macro G OSS is a 1:1 macro lens with a Sony E mount.

  • Sony specifies optical stabilisation and a minimum focusing distance of 0.28 m.
  • Minimum focusing distance is not the working distance in front of the lens, so it doesn’t tell you directly how much room your lights will have.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is available in separate Sony E and L-Mount versions, both with 1:1 magnification.

  • Sigma states that the working distance at 1:1 is 14.1 cm.
  • Check which mount is available. Sigma specifies teleconverter use for the L-Mount version only.

Laowa

The 100mm f/2.8 2x Ultra Macro APO is an option for anyone looking for magnification above 1:1, provided they choose a version that suits their camera.

  • Laowa specifies up to 2× magnification.
  • According to Laowa, only the Canon EF version has a chip and motor for aperture control through the camera; the other mounts listed are operated manually.

Related products

Related products coming soon.

Frequently asked questions

Is 1:1 enough for my fossil?

It depends on the detail you want to photograph and your sensor size. First decide whether you want to capture the whole fossil or a single small feature, then compare the maximum reproduction ratios of lenses with a compatible mount. Canon specifies up to 1.4× for the RF 100mm F2.8L Macro IS USM, and Laowa up to 2× for the 100mm f/2.8 2x Ultra Macro APO. The Sony, Nikon and Sigma models listed offer 1:1.

How can I light a fossil with little contrast or visible texture?

Before choosing a different lens because of the contrast, try changing the direction of the artificial light. In research on fossil photography, Philip Crabb describes, among other things, using low-angle lighting in Palaeontology to bring out contrast and detail. Results depend on the fossil, so make sure your setup also leaves enough space in front of the lens.

Will a smaller aperture automatically bring the whole fossil into focus?

Not necessarily: depth of field can remain limited at high macro magnifications. For a stationary fossil, you can combine shots taken at different focusing distances. Check separately whether your camera and lens support automatic focus bracketing.

What should I check about the guarantee and buying online in the Netherlands?

Check who the seller is and which terms apply to your specific order. According to the Dutch government, consumers buying remotely from a business often have a 14-day cooling-off period, although there are exceptions; this doesn’t necessarily apply to purchases from a private individual. The Dutch government also states that the seller is your point of contact if a product is faulty.