Who is this buying guide for?

Photographers capturing fine seed pod details

You want to photograph seeds, edges or surface textures at high magnification, and are comparing lenses that fit your camera.

Photographers working at a shared workbench

You need to arrange your camera, subject and lighting within the available space. The working distance for close-up photography determines how much room there is in front of the lens.

Photographers who want to capture relief in sharp focus

You want to show the different heights of a stationary seed pod in sharp focus, and can use a stable set-up and, if needed, a focus stack.

What should you look for when buying?

Shorter macro lens around 50 mm

Choose this if: You have a Nikon Z camera and also want to frame the whole seed pod or part of the workbench. Compare the NIKKOR Z MC 50mm f/2.8, which offers 1:1 magnification.

Trade-off: Nikon gives the distance between the front of the lens and the subject as approximately 5 cm for close-up photography. Check that there is enough room for lighting with your chosen framing.

Macro lens around 90–105 mm

Choose this if: You want to capture fine details and need room in front of the lens for lighting. Compare versions that fit your camera mount.

Trade-off: Models vary in mount and magnification. Sony gives the working distance for the FE 90mm as approximately 13 cm, but this measurement does not automatically apply to other lenses.

Extra magnification with manual focus

Choose this if: The smallest structures are your main focus and you have a compatible APS-C camera. Consider the Laowa 65mm f/2.8 2X Ultra-Macro in the right mount.

Trade-off: The Canon RF version has manual focus. Its stated 17 cm at 2:1 is a minimum focusing distance, not the clear space in front of the lens.

Close-ups without requiring 1:1 magnification

Choose this if: You have a Canon EOS R camera and mainly photograph the shape of a seed pod or less tiny details. The RF 85mm F2 Macro IS STM offers up to 0.5x magnification, which may suit your framing.

Trade-off: The maximum magnification of 0.5x is not the same as 1:1 or more. Decide in advance how small you want the detail to appear in the frame.

What to consider What to look for when buying Who is this important for?
Camera compatibility Check the mount and sensor format for which the exact version of the lens is designed. If I’m buying a lens for my existing camera, I want to be sure the version will fit. Around 29% of consumers make compatibility their top buying priority.
Magnification and framing Compare the maximum magnification of the exact model with the size of the seeds or structures you want to capture. If I want to fill the frame with tiny details, I want to know in advance what magnification my framing requires. Around 29% of consumers prioritise these small structures.
Room for lighting Check the working distance at the magnification you’ll use; don’t estimate it from the minimum focusing distance alone. At a shared workbench, I want to position my lighting without getting in the way of the lens or subject. Around 21% of consumers prioritise space in front of the lens.
Sharpness across the relief Check whether your camera model supports focus bracketing and decide how you’ll combine the shots. If I want to show the depth of a stationary seed pod in sharp focus, a stable set-up and a suitable focusing method will help. Around 21% of consumers start with the relief.

Common buying mistakes

  • Assuming every macro lens offers the same magnification

    Canon states that the RF 85mm F2 Macro IS STM offers up to 0.5x magnification, while the RF 100mm F2.8L Macro IS USM offers up to 1.4x. So the word ‘macro’ doesn’t tell you how much of a tiny detail will be captured on the sensor.

    First decide how you want to frame your subject, then compare the maximum magnification of the exact lens.

  • Confusing minimum focusing distance with clear space in front of the lens

    Minimum focusing distance is measured from the sensor, so it is not the same as the working distance from the front of the lens. Too little clear space can make it difficult to position lighting at a shared workbench.

    Check the working distance at the magnification you need, then plan your lighting set-up accordingly.

  • Choosing a version based on the model name alone

    A similar model name doesn’t guarantee that the mount or sensor version will suit your camera. For example, Sigma offers this 105 mm lens in separate Sony E and L-Mount versions; Laowa specifies the Canon RF version discussed here for APS-C.

    Before buying, compare the full version name with your camera’s mount and sensor format.

Brands to compare

Compare the specific lens version for its mount, magnification and working distance. Differences between the models mentioned here do not necessarily apply to the entire brand.

Canon

For EOS R cameras, there are models to suit different types of framing.

  • Canon states that the RF 85mm F2 Macro IS STM offers up to 0.5x magnification, while the RF 100mm F2.8L Macro IS USM offers up to 1.4x.
  • These magnification figures apply to these models. Check your desired framing and make sure the lens is compatible with your camera.

Nikon

For Nikon Z cameras, options include a 50mm macro lens and a 105mm mid-telephoto lens.

  • Nikon gives both the Z MC 50mm f/2.8 and the Z MC 105mm f/2.8 VR S a reproduction ratio of 1:1.
  • For close-up photography with the Z MC 50mm, Nikon gives the distance from the front of the lens as approximately 5 cm. Check separately how much room you need for lighting at your chosen magnification.

Sony

The FE 90mm F2.8 Macro G OSS is a 1:1 lens with a Sony E mount, designed for full-frame cameras.

  • Sony gives the working distance for this model as approximately 13 cm, which is useful when planning where to position your lighting.
  • The minimum focusing distance of 0.28 m is different from the working distance. These figures apply to this model.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is available in separate Sony E and L-Mount versions.

  • Sigma gives the lens a maximum magnification ratio of 1:1 and lists a focus limiter.
  • The stated minimum focusing distance of 29.5 cm is not the clear space in front of the lens. Check the mount and working distance for your set-up.

Laowa

The Canon RF version of the 65mm f/2.8 2X Ultra-Macro covered here is specified for APS-C cameras.

  • Laowa states that this version offers up to 2x magnification.
  • Focusing is manual. The stated minimum focusing distance of 17 cm at 2:1 is not the clear space in front of the lens. Check that the version is compatible with your camera.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Is the minimum focusing distance also the space available for your light?

No. Sony distinguishes between the minimum focusing distance measured from the sensor and the working distance measured from the front of the lens. For the FE 90mm, Sony gives a working distance of approximately 13 cm. Check how much room is available at the magnification you want to use.

How can you get more of a textured seed pod in focus?

For a stationary subject, you can take several shots with the focus shifted between them, then combine the images. Check the capabilities of your exact camera model and use a stable set-up. Canon describes focus bracketing and in-camera stacking for models including the EOS R7 and R10.

Will you need anything else for your set-up besides the lens?

Allow room for lighting and use a stable set-up if you’re planning to create a focus stack. These are considerations for your workflow, not an indication that accessories are included with any of the lenses mentioned.

Who can help if a faulty lens was bought as a consumer purchase in the Netherlands?

According to the Dutch government, the seller must provide a solution if a product is faulty. The Netherlands has no fixed statutory guarantee period; a manufacturer’s or extended warranty is in addition to your statutory rights. What you could reasonably expect from the product and the cause of the fault are taken into account when assessing the issue.

Can you take identifiable photos of other people in a shared workshop and publish them?

It depends on the circumstances and the photographer’s role. The Dutch Data Protection Authority specifically states that an employer needs a legal basis to take and publish images of employees; in most cases, this means obtaining consent. Keep people out of your seed pod photos if they don’t need to be in them, and assess the situation separately before publishing identifiable images.