Who is this choice relevant to?

Potters looking to capture small glaze details

If you want to fill the frame with crystals, crackle patterns or fine designs, consider both magnification and how much of the surface will be in focus. Canon Europe describes focus stacking as a way to combine shots of the same subject taken with different focus points.

Makers with a small photography table

If you want to photograph both a wider area of glaze and small details, you’ll need room for the camera, subject and lighting. For close-ups, the practical clearance in front of the lens is particularly important when positioning your lights.

Makers of glossy product photographs

If you want to show the colour and sheen of the glaze, consider the lighting and white balance as well as the lens. Barta Ceramics discusses reflections when photographing pottery, while Sony Netherlands explains how white balance compensates for the colour of the ambient light.

What should you look for when choosing?

First check the camera mount, then decide which magnification and working space suit your subject and table.

Point to consider What should you check? Who is this important for?
Compatibility Compare your exact camera model, mount and sensor size with the specific lens version. If I first want to check whether the lens will fit my camera, I’ll confirm the mount and version before weighing up other features. Around 33% of consumers put compatibility first.
Magnification Compare the maximum reproduction ratio with the size of the smallest detail you want to photograph. If I want a small crackle pattern to fill the frame, I’ll check whether the magnification is sufficient. Around 27% of consumers prioritise fine details.
Light and colour Allow space for soft, movable lighting and assess test shots; adjust the white balance if needed. If I want to preserve the glaze’s sheen without reflections or a colour cast dominating the photo, I’ll consider the lighting set-up too. Around 20% of consumers prioritise light and colour.
Working space and focus Measure the space in front of and behind the camera for your desired framing; bear depth of field in mind for close-ups. On a small table, I want to know whether there’ll still be room for the lens, lights and camera. Around 20% of consumers place the most importance on the set-up and keeping the surface in focus.

Common pitfalls

  • Assuming ‘macro’ means 1:1

    According to Canon, the Canon RF 35mm F1.8 MACRO IS STM has a maximum magnification of 0.5×. It may not be the best choice if you want a very small glaze pattern to fill the frame.

    Check the maximum reproduction ratio for the exact lens version and compare it with the size of the detail.

  • Confusing minimum focusing distance with the clearance in front of the lens

    Minimum focusing distance is measured from the sensor plane and doesn’t tell you directly how much room there’ll be between the lens and the glaze for lighting. Sony Netherlands distinguishes between this distance and the working distance in front of the lens.

    Where this information is available, compare the working distance and also measure the space behind the camera in your set-up.

  • Expecting higher magnification to solve reflections and limited depth of field

    Glossy ceramics can reflect light sources, and macro shots may have only a small area in focus. Barta Ceramics discusses reflections when photographing pottery; Canon Europe explains focus stacking using different focus points.

    Start with test shots using soft light and a suitable white balance. If a single shot doesn’t provide enough depth of field for a stationary subject, you could explore whether a series of shots at different focus points and combining them would work with your camera and editing software.

    A stable set-up, lighting control or editing may be needed to get the photo you want.

Brands and models for reference

Canon

For Canon RF, Canon lists the RF 35mm F1.8 MACRO IS STM and RF 100mm F2.8L Macro IS USM as macro models with different maximum magnifications.

  • Canon specifies a maximum of 0.5× for the RF 35mm and up to 1.4× for the RF 100mm.
  • The RF 35mm isn’t a 1:1 lens; check that your chosen camera uses the Canon RF mount.

Nikon

According to Nikon, the NIKKOR Z MC 50mm f/2.8 is a 1:1 macro lens for the Nikon Z system.

  • Nikon states that there is approximately 5 cm between the front of the lens and the subject at the closest focusing distance.
  • At this shooting distance, bear in mind that there’s limited space in front of the lens for positioning lights.

Sony

According to Sony, the Sony FE 90mm F2.8 Macro G OSS is a 1:1 lens for Sony E.

  • Sony specifies a working distance of approximately 13 cm for this model.
  • This working distance doesn’t tell you how much room the camera needs behind the subject.

Sigma

According to the manufacturer, the Sigma 105mm F2.8 DG DN MACRO | Art is available in separate Sony E and L-mount versions.

  • Sigma specifies a maximum magnification of 1:1 for this model.
  • The minimum focusing distance of 29,5 cm is measured from the sensor plane; it isn’t the clear working distance in front of the lens.

Laowa

Venus Optics positions the Laowa 65mm f/2.8 2x Ultra Macro APO for APS-C cameras and offers versions for different mounts.

  • Venus Optics specifies a maximum magnification of 2:1 and a minimum focusing distance of 17 cm.
  • Check the exact mount, and don’t mistake the minimum focusing distance for the clear space in front of the lens.

Products for this photography set-up

Related products coming soon.

Frequently asked questions

Is 0.5× enough for a photo of glaze?

It depends on the size of the detail and how tightly you want to crop. Canon specifies a maximum of 0.5× for the RF 35mm F1.8 MACRO IS STM; 1:1 lenses from Canon, Nikon and Sony, and the 2:1 Laowa specified by Venus Optics, offer greater maximum magnification. Also check that the lens fits your camera.

How can I keep a curved or uneven glaze surface in focus?

For close-ups, a single shot may not have enough depth of field to show the entire surface in focus. For a stationary subject, you can take shots with different focus points and combine them; check that your camera and editing software support this technique.

What can I do about reflections and inaccurate colours?

Try soft light and, if necessary, change the angle of the light source, camera or ceramic piece; assess the results with test shots. If the colour of the ambient light affects the photo, you can adjust the white balance. Bear in mind that reducing reflections can also change how the sheen appears.

What are my rights when shopping online in the Netherlands?

For eligible distance purchases from a business, you generally have a 14-day cooling-off period, according to the Dutch government; check the terms and any exceptions that apply to your purchase. Products must also be of satisfactory quality, and the seller is your point of contact if there’s a problem. The Dutch government states that the Netherlands doesn’t have a fixed statutory two-year guarantee period for every product.