Who is this choice for?

Capturing glaze details

You want to bring out craquelure, crystals or subtle colour variations. So look at the magnification available and consider how much of the curved piece can be in focus at once.

Presenting ceramics against white

You take both recognisable product photos and close-ups. Framing, lighting, reflections and colour reproduction are just as relevant as your choice of lens.

Photographing in a small setup

You want a lens for your existing camera that leaves enough room for the piece and the lighting. Check the mount and working distance separately.

What should you look for?

Start with your camera’s mount, then decide how much magnification you need and finally check that your setup has enough room for lighting and a white background.

If you’re choosing a lens to capture glaze details against white, the considerations below address the main things shoppers look for.

Buying concern What should you check? Who is this important for?
Fits your camera Compare the exact mount with your camera model and check compatibility with your sensor format, if applicable. I want to know first whether the lens will fit straight onto my existing camera body. Around 33% of shoppers put compatibility first.
Magnifying small details Check the maximum magnification of the exact version and consider whether a single plane of focus will be enough. I want to capture craquelure or small crystals clearly and keep the detail in focus. Around 27% of shoppers focus mainly on magnifying details.
Colour and shine on white Assess reflections in the glaze and adjust the white balance to suit the light you’re using. I want to assess glaze colours against a white background without unwanted reflections or colour casts. Colour and reflections are the top priority for around 20% of shoppers.
Room for lighting Check the working distance at the magnification you want; it is not the same as the minimum focusing distance. I want to be able to light my piece without the lens leaving too little room. Around 20% of shoppers name working space as their main buying concern.

Common pitfalls

  • Assuming the word ‘macro’ means the magnification you need

    The maximum reproduction ratio tells you how large a detail can appear on the sensor. So the label ‘macro’ alone won’t tell you whether a particular glaze detail will look big enough in the image.

    Compare the maximum magnification of the exact lens with the size of the detail you want to photograph.

  • Confusing minimum focusing distance with the clear space in front of the lens

    Minimum focusing distance is measured from the sensor plane, while working distance is the space between the subject and the front of the lens. These distances are not interchangeable.

    Check the working distance at the magnification you plan to use before finalising your camera and lighting setup.

  • Expecting a lens to fix colour casts and reflections

    The background, light source and white balance also affect how a product against white and glossy glaze appear in the image.

    Try a matt white background and adjust the white balance under the lighting you actually use. Adobe recommends a neutral, matt white background to help reduce unwanted reflections and colour casts.

  • Confusing an additional warranty with your statutory rights

    The Dutch government says there is no fixed statutory warranty period in the Netherlands. You are still entitled to a product that works properly, and the retailer is your point of contact if something is wrong.

    Check what extra cover is offered by a manufacturer’s warranty or an optional warranty, and contact the retailer first if there is a fault.

Brands to compare

Canon

For a compatible Canon RF camera, Canon says the RF 100mm F2.8L Macro IS USM offers up to 1.4× magnification.

  • Canon lists a minimum focusing distance of 0.26 m.
  • That is not the clear working distance. The claim of up to five stops of stabilisation applies under Canon’s test conditions; at 1.0× magnification, Canon lists two stops.

Nikon

For a compatible Nikon Z camera, Nikon says the NIKKOR Z MC 105mm f/2.8 VR S offers 1:1 reproduction and manual focus control.

  • The lens has manual focus control.
  • Its positioning for handheld shooting does not mean stabilisation will fix a blurred plane of focus in a close-up of glaze. Check the working distance for your own setup.

Sony

According to Sony, the FE 90 mm F2.8 Macro G OSS is a 1:1 macro lens for full-frame and APS-C cameras with an E-mount.

  • Sony lists built-in optical stabilisation.
  • The compatibility information applies to E-mount cameras; check that this version is suitable for your camera body.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is available with Sony E and L-Mount fittings; choose the version that suits your camera.

  • Sigma specifies 1:1 magnification and a minimum focusing distance of 29,5 cm.
  • The minimum focusing distance is not the same as the clear working distance in front of the lens.

OM SYSTEM

For a compatible Micro Four Thirds camera, OM SYSTEM says the M.Zuiko Digital ED 60mm F2.8 Macro offers 1:1 magnification.

  • OM SYSTEM lists a weight of 185 g and a minimum focusing distance of 0,19 m.
  • The ‘2×’ figure refers to the 35mm-equivalent rating; the maximum reproduction ratio remains 1:1.

Joybuy product selection

A Joybuy pick for Sony E-mount product and close-up photography. Its limited maximum magnification is a key drawback for capturing very small glaze details.

Sony E 50mm f/1.8 OSS Black lens

Sony E 50mm f/1.8 OSS Black

The product information lists product and close-up photography; the stated maximum magnification is limited for very small glaze details.

Focal length: 50mm. Aperture designation in the product name: f/1.8.

Joybuy

Frequently asked questions

Does 1:1 mean the whole ceramic piece will look large in the image?

No. At 1:1, a small subject can be reproduced at life size on the sensor when you focus at the required close distance. To photograph the whole piece, you’ll need to reconsider your framing and shooting distance.

Why isn’t the whole curved glaze surface in focus?

Macro photography has a shallow depth of field. If the piece is still, you can focus on different areas and combine the shots using focus stacking; this also requires post-processing.

How can I prevent a colour cast against a white background?

Set the white balance to match the light you’re shooting under and use a matt white background. Also check for reflections in the glossy glaze; changing the lens won’t automatically correct the lighting.

Am I entitled to exactly two years’ warranty on a lens bought online in the Netherlands?

No. According to the Dutch government, there is no fixed statutory warranty period in the Netherlands, but you are entitled to a product that works properly. The retailer is your point of contact if there is a fault; a manufacturer’s warranty or an additional warranty is on top of that.

Can I return a lens I bought online?

For many online purchases from a business, you have a 14-day cooling-off period, according to the Dutch government. There are exceptions, and the rules differ for business and private sellers, so check the specific seller and terms of sale.