Start by checking your camera’s mount, then decide whether you’ll mainly be photographing fine glaze details or larger areas of a pot too. Nikon describes the Z MC 50mm f/2.8 as a 1:1 macro lens, but at its closest focusing distance it leaves around 5 cm of clearance in front of the lens. Check that your light or diffuser will fit. A lens won’t eliminate colour casts from artificial light or every reflection, so pay attention to white balance and light placement too.
Who is this for?
Potter with an existing mirrorless camera
You want to capture the details of your glaze using your current camera. First, check that the lens mount is compatible. Magnification and the space available for your lighting are also important factors when choosing a lens.
Maker documenting glaze colours
You want to photograph glaze consistently under artificial light. Alongside a compatible lens, you’ll need a controlled lighting set-up and careful attention to white balance. Canon UK explains how artificial light can affect colour reproduction.
Photographer capturing small glaze patterns
You want to show fine texture, so you’re comparing the magnification and focusing capabilities of specific models. Nikon UK, Canon UK and Sony UK provide macro specifications for individual models. Also consider how much room you’ll need for your lights.
What should you look for?
First check your camera’s mount, then compare magnification, the framing you want and the space available for your lighting set-up.
| What to consider |
What should you check? |
Who is this important for? |
| Mount and camera compatibility |
Make a note of your exact camera model and check both the mount and the lens version. For example, Sigma offers this 105mm model in separate Sony E-mount and L-mount versions. |
If you already own a mirrorless camera, you’ll want to make sure the lens fits your camera body. Around 33% of consumers put compatibility first. |
| Colour and reflections under artificial light |
Check your camera’s white balance settings and adjust the position of your light if needed. If you’re considering a filter, check its size and how it affects the glaze’s sheen. |
If you want to document glaze colours under artificial light, you’ll need to assess colour casts and distracting reflections. Around 27% of consumers give colour and reflections top priority. |
| Magnification for fine detail |
Compare the maximum magnification of the exact model and check whether you can frame the detail you want at a practical shooting distance. Nikon specifies 1:1 for the Z MC 50mm, as does Sony for the FE 90mm; Canon specifies 1.4× for the RF 100mm. |
If you want to capture small cracks, speckles or glaze texture, those details will be the main factor in your choice. Around 20% of consumers prioritise fine detail. |
| Framing and room for lighting |
Compare the framing you want with the working distance at the magnification you’ll use. The minimum focusing distance is not the same as the clearance in front of the lens. Nikon specifies around 5 cm for the Z MC 50mm at its closest focusing distance. |
If you need to photograph a larger area of a pot while leaving room for a light or diffuser, you’ll want to check that they can work together before setting up. Around 20% of consumers prioritise framing and lighting. |
Common buying pitfalls
-
Choosing a lens by brand or magnification without checking the mount
Macro lenses come with different mounts. For example, Sigma offers this 105mm model in separate E-mount and L-mount versions.
Before you buy, compare your exact camera model with the full lens specification.
-
Mistaking the minimum focusing distance for the clearance in front of the lens
For the Nikon Z MC 50mm, Nikon specifies a focusing distance of 0.16 m and around 5 cm of clearance in front of the lens at its closest setting. These measurements describe different things.
Check the working distance of the specific model at the magnification you plan to use, and make sure your light or diffuser will fit.
-
Expecting a new lens to fix colour casts or every reflection
White balance affects how artificial light is rendered, and a polarising filter is not the same as using a different lens or carefully positioning a light.
Try a consistent lighting set-up and suitable white balance first. If you use a filter, also check how the glaze’s sheen looks.
A suitable filter or changes to your lighting set-up may mean extra purchases.
Brands worth comparing
Nikon
For Nikon Z cameras, options include the Z MC 50mm f/2.8 and the Z MC 105mm f/2.8 VR S. Nikon specifies a 1:1 reproduction ratio for both.
- Nikon specifies around 5 cm of clearance in front of the Z MC 50mm at its closest setting. This is worth considering when positioning a light.
- This clearance applies to this particular model. Check the working distance of the lens you’re considering, and treat Nikon’s quality claims as manufacturer descriptions rather than independent comparisons.
Canon
For compatible Canon RF cameras, Canon specifies a maximum magnification of 1.4× for the RF 100mm F2.8L Macro IS USM.
- Canon specifies a minimum focusing distance of 0.26 m and a filter diameter of 67 mm.
- A higher maximum magnification doesn’t, by itself, tell you anything about the colour reproduction of glaze or the clearance in front of the lens. Stabilisation figures depend on Canon’s test conditions.
Sony
Sony describes the Sony FE 90mm F2.8 Macro G OSS as a 1:1 macro lens for compatible Sony E-mount cameras, with optical stabilisation.
- Sony specifies a minimum focusing distance of 0.28 m and a filter diameter of 62 mm.
- Check the working distance at the magnification you’ll use. The minimum focusing distance doesn’t tell you how much room there is in front of the lens.
Sigma
According to Sigma, the Sigma 105mm F2.8 DG DN MACRO is available in separate Sony E-mount and L-mount versions and has a 1:1 magnification ratio.
- Sigma specifies a minimum focusing distance of 29.5 cm for this model.
- The E-mount and L-mount versions are not interchangeable. The minimum focusing distance is also not the same as the clearance in front of the lens.
Fujifilm
Fujifilm describes the FUJINON XF80mmF2.8 R LM OIS WR Macro as an XF lens for the Fujifilm X system, with internal focusing and optical stabilisation.
- Fujifilm says the front element stays in place while focusing. This can be useful if you’ve carefully positioned a light source.
- These features don’t prove that glaze colours will look better than with other systems. Assess your lighting set-up and colour reproduction separately.
Related products
Related products coming soon.
Frequently asked questions
Do I need 1:1 magnification to photograph an entire pot?
No, you don’t need 1:1 magnification to photograph an entire pot. Maximum magnification matters most for small details. Choose your shooting distance and framing based on how much of the pot you want in the shot. Nikon also describes the Z MC 50mm as suitable for shooting beyond its closest macro setting.
Is image stabilisation enough if I’m using a tripod?
No, image stabilisation is no substitute for a stable set-up or accurate focusing. Nikon recommends using a tripod for small subjects. Adjust your light’s position to suit the lens and subject, and refer to the manual for your camera and lens combination for guidance on stabilisation settings.
What are my rights if I buy a lens online as a consumer?
According to the Dutch government, consumers who buy remotely are generally entitled to a 14-day cooling-off period, although there are exceptions. This rule doesn’t apply to online purchases from a private individual. Your statutory guarantee is separate: in the Netherlands, there is no fixed statutory guarantee period, and the retailer is your point of contact if something goes wrong. Check the terms that apply to your specific purchase.