Who is this lens choice relevant to?

Photographing key details

If you want to capture maker’s marks, wear or small surface details individually, compare the maximum magnification with the crop you need. Nikon Nederland and Canon Europe describe macro lenses with different magnification capabilities.

Photographing on a crowded workbench

If you have little room for a diffuser or other lighting, check how much clear space there is in front of the lens at your chosen magnification. Sigma Corporation distinguishes between working distance and focusing distance.

Photographing with a shared camera setup

If you share a lens with others or put it away after use, choose a version that fits the camera you use. The Nikon, OM SYSTEM, Sigma, Sony and Canon versions mentioned here don’t all have the same mount.

What should you look for in a macro lens?

What to consider What should you check? Who is this important for?
Mount and version Check your exact camera model, its mount and the lens version; don’t rely on the brand or focal length alone. If I want to use the lens on a shared camera, I need to make sure the version fits that camera. Around 33% of consumers prioritise system compatibility.
Magnification and crop Compare the exact model’s maximum magnification with the crop you need; you won’t necessarily need extra magnification to photograph a whole key. If you want small maker’s marks or areas of wear to be clearly recognisable, a suitable crop will be more useful than magnification you don’t need for the shot. Around 27% of consumers prioritise this level of detail.
Working distance and lighting Check the working distance at your chosen magnification. Nikon Nederland gives around 5 cm in front of the lens for the Z MC 50mm at its closest focusing distance; Sigma Corporation gives 141 mm for the 105mm DG DN at 1:1. If I want to position a diffuser close to a key, I don’t want the lens to take up the space needed for the light. That’s why around 20% of consumers prioritise room for lighting.
Reflections and depth of field Consider what lighting and stable support are available. Diffused light and multiple focus positions can be useful when photographing reflective metal and a stationary key. If you want to control glare and keep details sharp along the length of a key, consider the lighting and setup too. Around 20% of consumers prioritise this level of image control.

Common pitfalls

  • Confusing minimum focusing distance with the space in front of the lens

    Minimum focusing distance is measured from the sensor plane. The usable space between the lens and the key can therefore be smaller, which affects where you can position a diffuser.

    Compare the working distance at the magnification you want to use with the space available on your workbench.

  • Choosing more magnification to solve reflections or limited depth of field

    Higher magnification won’t automatically eliminate reflections from metal or solve limited depth of field. Canon Europe describes combining shots taken at different focus positions; this requires a stable setup.

    Try diffused light and a stable setup before choosing extra magnification as the solution.

  • Assuming all versions of a macro lens are interchangeable

    The lenses and Sigma versions mentioned here have different mounts. A lens that doesn’t fit the camera you’re using won’t work for that setup.

    Check the exact camera model, mount and lens version on the product packaging and product page.

Brands and macro ranges for reference

Nikon

The NIKKOR Z MC 50mm and Z MC 105mm are 1:1 macro lenses for compatible Nikon Z cameras, with different focal lengths.

  • Nikon Nederland gives around 5 cm of space in front of the lens for the Z MC 50mm at its closest focusing distance; bear this in mind when positioning your lighting.
  • According to Nikon Nederland, the Z MC 105mm has built-in VR. This doesn’t replace a stable setup when combining shots taken at different focus positions.

Canon

The RF 100mm F2.8L Macro IS USM is an option for a compatible Canon RF camera if magnification above 1:1 is relevant to you.

  • Canon Europe specifies a maximum magnification of 1.4× and a closest focusing distance of 0.26 m.
  • Focusing distance isn’t the same as the clear space in front of the lens. You won’t need the extra magnification for every photo of a whole key.

Sigma

The 105mm F2.8 DG DN MACRO | Art is a 1:1 option, available in separate Sony E and L-Mount versions.

  • Sigma Corporation gives a working distance of 141 mm at 1:1 for this model.
  • Check the mount for your version: Sigma lists Sony E and L-Mount for this model, not Canon RF or Nikon Z.

Sony

The FE 90mm F2.8 Macro G OSS is a 1:1 option for a compatible Sony E camera.

  • Sony Nederland specifies optical stabilisation and a maximum magnification ratio of 1.0×.
  • The minimum focusing distance of 0.28 m isn’t the clear space in front of the lens; check separately how much room your lighting needs.

OM SYSTEM

The M.Zuiko Digital ED 60mm F2.8 Macro is a 1:1 option for a compatible Micro Four Thirds system.

  • OM SYSTEM specifies a weight of 185 g and a minimum focusing distance of 0.19 m.
  • OM SYSTEM lists 2× as the 35mm-equivalent magnification; this isn’t the actual 1:1 reproduction ratio. Also check the space in front of the lens needed for your lighting.

Related products

Related products coming soon.

Frequently asked questions

Is a lens with ‘macro’ in its name always good enough for small maker’s marks?

No. Compare the exact lens’s maximum magnification with the crop you need. The 1:1 lenses reviewed and Canon’s 1.4× lens offer different maximum reproduction ratios; you don’t automatically need to choose the highest one to photograph a whole key.

How can you avoid harsh reflections and a blurred end of the key?

When photographing shiny metal, start with diffused, controllable light. If a single plane of focus doesn’t give you the depth of field you want, you can combine shots taken at different focus positions when photographing a stationary key; use a stable camera setup.

What should you check when maintaining and using equipment in a shared workshop?

Leave room for the camera and lighting, and store the lens safely after use. Follow the care instructions for your chosen lens; don’t treat the surface of old keys as part of lens maintenance.

When buying online in the Netherlands, are you always entitled to exactly two years’ warranty and can you return the item?

No. Statutory conformity for a private consumer purchase is different from a commercial manufacturer’s warranty, and Business.gov.nl doesn’t describe it as a general fixed term of exactly two years. For a typical online consumer purchase, you usually have a 14-day cooling-off period from the day after delivery, subject to statutory exceptions; different consumer rights apply to business purchases.