PCB documentarian
You want to take overview shots and capture component details clearly with a lens that fits your existing camera. Nikon and Fujifilm describe macro lenses for their Z and X systems respectively.
Start by checking that the lens mount is compatible with your camera, then decide whether you mainly want to capture the whole PCB or small components. For close-up details, magnification above 1:1 can be useful, but check the working distance too: Sony Netherlands gives around 13 cm for the FE 90mm, while Fujifilm specifies around 1.2 cm for the XF30mm at 1:1. Higher magnification won’t eliminate reflections; diffuse lighting and focusing require separate decisions.
You want to take overview shots and capture component details clearly with a lens that fits your existing camera. Nikon and Fujifilm describe macro lenses for their Z and X systems respectively.
You want to capture tiny connections or markings at a larger scale, so you need to weigh up magnification, working distance and focusing. Canon Europe, Sony Netherlands and Laowa list magnification options for specific models.
You photograph under artificial light and need enough room to manage reflections on shiny parts of the PCB. Basler describes diffuse dome lighting for shiny PCBs.
First check the camera mount, then decide which details you want to show and whether you’ll have enough room for your lighting setup.
| What to consider | What should you check? | Who is this most important for? |
|---|---|---|
| Mount and camera | Check the camera model, the mount and the exact version of the lens. | I want to make sure the lens fits my camera before comparing magnification. Around 29% of consumers give compatibility top priority. |
| Room for lighting | Compare the working distance at the magnification you want; the minimum focusing distance is not the same as the clear space in front of the lens. | When photographing shiny components, I need room to position diffuse light around the PCB. Around 29% of consumers prioritise space for lighting and control over reflections. |
| Magnification | Decide how small the detail you want to show is, then compare the maximum magnification of the exact model. | If I want to fill the frame with small markings, magnification is my main consideration. Around 24% of consumers give detail magnification top priority. |
| Depth of field and focusing | Check that your camera supports the focusing method you want to use and that the lens controls suit your shooting process. | When I need components at different heights to appear sharp, I want to be able to repeat my focusing precisely. Around 18% of consumers prioritise depth of field and workflow. |
The focusing distance is measured from the camera and doesn’t tell you how much room is left in front of the lens. Fujifilm gives a working distance of around 1.2 cm for the XF30mm at 1:1.
Check the working distance for the exact model at the magnification you want to use.
Magnification and lighting solve different problems. Basler describes diffuse dome lighting for shiny PCBs.
Decide separately how much magnification you need and how the artificial light falls on the PCB.
The aperture controls vary by mount on the Laowa 100mm f/2.8 2x Ultra Macro APO: according to Laowa, only the Canon EF version has a chip and motor for control via the camera.
As well as the model name, check the exact mount and controls for the version you’re considering.
The RF 100mm F2.8L Macro IS USM is an option for a compatible Canon RF system if you’re looking for magnification above 1:1.
The Z MC 50mm f/2.8 and Z MC 105mm f/2.8 VR S are macro options for compatible Nikon Z cameras.
The FE 90mm F2.8 Macro G OSS is designed for a compatible Sony E camera if 1:1 magnification and room for lighting are important to you.
The 105mm F2.8 DG DN MACRO | Art offers 1:1 magnification in separate Sony E and L-Mount versions.
The 100mm f/2.8 2x Ultra Macro APO is an option if you need magnification above 1:1 in a compatible version.
The XF30mmF2.8 R LM WR Macro is a compact 1:1 option for a compatible Fujifilm X system.
Not necessarily; choose your framing based on the size of the PCB and the details you want to show. At 1:1, the subject is reproduced life-size on the sensor, which can be especially useful for small details.
Start by varying the position of the artificial light and trying a diffuse light source. Basler refers to diffuse dome lighting for shiny PCBs; this supports the lighting principle, not the need to buy an industrial dome light.
With a static setup, you can combine shots taken at different focus points to increase the apparent depth of field. Nikon Netherlands describes this technique; check that your camera and workflow support the necessary focus and image-stacking features.
For an eligible distance purchase from a business, the Dutch government generally provides a 14-day cooling-off period; this doesn’t apply to an online purchase from a private individual. You also have statutory rights if a product isn’t as it should be; the seller is your point of contact. The terms depend on the specific purchase.
No. A manufacturer’s warranty isn’t the same as your statutory rights against the seller. The Dutch government states that there is no fixed statutory warranty period for all products in the Netherlands; what applies depends on the product and the circumstances of the purchase.