Who is this guide for?

Patch maker with an existing camera

You want to check first that the lens mount is compatible with your camera. The models mentioned are available with Canon RF, Nikon Z, Sony E and L mounts; Sigma lists Sony E and L mounts for its 105mm lens.

Maker of close-up stitch photos

You want to capture stitches and texture in detail. Check the maximum magnification of the exact lens model: Nikon and Sony specify 1:1 for the macro models mentioned, while Canon gives a maximum of 1.4× for the RF 100mm.

Home studio photographer with limited workspace

You’re taking photos on a table and want to position your camera, patch and light so the patch is properly lit. The stated working distance at your chosen magnification can help you work out how much space you’ll need.

What should you look for when choosing?

What to consider What should you look for? Who is this most important for?
Compatibility with your camera Check your camera model, lens mount and sensor size. If you want to keep using your current camera, the mount must match. Around 36% of consumers prioritise compatibility with their existing camera.
Magnification for stitches and embroidery texture Compare the maximum magnification with the framing you want and the size of your patch. If you want to show individual stitches in detail, check the maximum magnification of the exact model. Around 29% of consumers give stitch detail top priority.
Room for lighting Check the working distance at your chosen magnification, then measure the space available for your camera, patch and light. If you’re working on a table, you’ll want to position the light in front of the lens without disrupting the shot you want. Around 21% of consumers prioritise space for studio lighting.
Sharpness across the embroidery texture Check whether your camera supports your preferred focusing method and plan a stable test shot. If you want to capture raised stitches and edges sharply, consider the plane of focus and your shooting setup. Around 14% of consumers give sharpness across the texture top priority.

Pitfalls to avoid

  • Choosing based only on ‘macro’ or the focal length

    Maximum magnification and your desired framing both affect how large small stitches appear in the shot; focal length alone won’t tell you that.

    Check the maximum reproduction ratio of the exact model and compare it with the framing you want for overview and detail shots.

  • Confusing the minimum focusing distance with the clear space in front of the lens

    The minimum focusing distance isn’t the same as the space between the lens and the patch. If there’s little room, positioning your light can be more difficult.

    If the manufacturer provides it, check the working distance at the magnification you need, and measure your own setup.

  • Confusing a manufacturer’s warranty with your statutory rights

    A manufacturer’s warranty doesn’t replace your statutory consumer rights. If a product develops a fault during normal use, contact the seller about your statutory guarantee, as advised by ACM ConsuWijzer.

    Keep your proof of purchase and contact the seller if a fault develops.

Brands to consider

Nikon

The NIKKOR Z MC 50mm f/2.8 and Z MC 105mm f/2.8 VR S are 1:1 macro options for compatible Nikon Z cameras.

  • Nikon Netherlands states that, at the minimum focusing distance of the Z MC 50mm f/2.8, there’s around 5 cm between the front of the lens and the subject.
  • At this short distance, bear in mind where you’ll position your lighting.

Sigma

The 105mm F2.8 DG DN MACRO | Art is available in versions with Sony E and L mounts.

  • Sigma states that this model has a working distance of 141 mm at 1:1.
  • This working distance applies at the stated magnification; also check that your full setup will fit in your studio.

Canon

The RF 100mm F2.8L Macro IS USM is an option for compatible Canon RF cameras.

  • Canon specifies a maximum magnification of 1.4× for this model.
  • You may not need this level of magnification to photograph an entire patch, so check the framing you want.

Sony

The FE 90mm F2.8 Macro G OSS is a 1:1 option for compatible Sony E cameras.

  • Sony specifies a minimum focusing distance of 0.28 m.
  • This is the focusing distance, not the clear space in front of the lens.

Joybuy products

Related products coming soon.

Frequently asked questions

Do you always need to shoot at 1:1 to photograph an entire patch?

No. Start by choosing the framing you want: 1:1 describes the ratio between the subject’s size and its image on the sensor; it isn’t a required setting for every shot. This level of magnification can be useful for individual stitches, though.

How can you keep raised stitches in focus?

Keep your camera and patch steady, and check the plane of focus. Set the aperture deliberately. If one shot doesn’t capture enough texture in focus, you can combine shots taken at different focus positions, if your equipment and editing software support it.

What else can you set up in your home studio alongside the lens?

Start with a stable camera setup, a plain background and an adjustable light. Move the light around and check how the stitches and shadows appear in the shot.

What cooling-off period and guarantee apply to online consumer purchases in the Netherlands?

Online consumer purchases generally come with a statutory cooling-off period of up to 14 days after delivery; ACM ConsuWijzer notes that exceptions apply. You’re also covered by the statutory guarantee if, during normal use, the product doesn’t meet what you could reasonably expect. The seller is your point of contact for this; a manufacturer’s warranty doesn’t replace this right.