Who is this buying guide for?

Portfolio creator with an existing camera

Wants to capture old keys clearly and in detail, without buying a lens with the wrong mount.

Photographer of fine metal details

Wants to capture engravings, wear or surface texture as separate close-ups, while weighing magnification against depth of field.

Creator with a tabletop set-up

Wants to control lighting and reflections, so pays attention to the working distance in front of the lens.

What should you look for in a macro lens?

First, check your camera’s mount and sensor size. Then work out how much magnification you need and whether there will be enough room for lighting when you take your photos.

Consideration What to check Who is this important to?
Mount and sensor size Compare your camera model, its mount and the lens version. I want a lens that will actually fit my camera. Around 28% of consumers prioritise compatibility above all else.
Magnification for fine details Check the maximum magnification of the exact model; the word ‘macro’ does not automatically mean 1:1. I want to capture a small engraving or worn spot as a close-up. Around 22% of consumers prioritise magnification for details like these.
Working distance and lighting Check the distance from the subject to the front of the lens, not just the minimum focusing distance. I want to position lighting around a reflective key. Around 22% of consumers prioritise space for lighting and control over reflections.
Depth of field for raised details Decide whether a single plane of focus will be enough; taking several shots with different focus points may be an option. I want a key with raised details to be sharp from front to back. Around 17% of consumers prioritise depth of field over maximum magnification.
Level of detail required First, test whether your current lens can capture the crop you want; extension tubes or close-up filters are possible close-up accessories. I don’t want to buy a separate macro lens if my existing kit can show enough detail. Around 11% of consumers prioritise avoiding an unnecessary purchase.

Common buying mistakes

  • Assuming ‘macro’ means 1:1

    Macro lenses don’t always achieve 1:1. Canon specifies a maximum of 0.5× for the RF 85mm F2 Macro IS STM and 1.4× for the RF 100mm F2.8L Macro IS USM.

    Compare the maximum reproduction ratio with the smallest details you want to show in your portfolio.

    To fill the frame with a small mark, you may need a lens with a different magnification.

  • Confusing the minimum focusing distance with the working distance

    The minimum focusing distance is measured from the sensor. It doesn’t tell you how much clear space there is in front of the lens, which can affect your lighting set-up.

    Check the working distance for the magnification you want to use.

    A short working distance can make it harder to position lighting near the key.

  • Assuming greater magnification will keep the whole key in focus

    When focusing at close range, depth of field can be limited, so raised edges and engravings won’t necessarily all be sharp.

    Distinguish between a detail shot and an overall image where the raised details need to be sharp from front to back. You may need to take several shots and edit them afterwards.

Brands to compare

Canon

For EOS R cameras, the options listed range from close-ups to magnifications above 1:1.

  • Canon specifies a maximum of 0.5× for the RF 85mm F2 Macro IS STM and 1.4× for the RF 100mm F2.8L Macro IS USM.
  • Maximum magnification varies by model, so check which version suits your camera and the framing you want.

Nikon

The NIKKOR Z MC 50mm f/2.8 is a 1:1 option for a compatible Nikon Z camera.

  • Nikon specifies around 5 cm between the front of the lens and the subject when focusing at close range.
  • The limited space in front of the lens needs to be considered when positioning your lighting.

Sony

The FE 90 mm F2.8 Macro G OSS, model SEL90M28G, is a 1:1 option for compatible Sony E cameras.

  • Sony specifies a working distance of around 13 cm for this lens.
  • Check that you have enough room in your tabletop set-up, and bear in mind that metal can be reflective.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is available for Sony E and L-Mount.

  • Sigma specifies 1:1 magnification and a minimum focusing distance of 29.5 cm, measured from the sensor.
  • Check the mount on the specific version; the focusing distance is not the clear space in front of the lens.

Laowa

According to Laowa, the 65mm f/2.8 2x Ultra Macro APO is designed for APS-C cameras and is available with various mounts.

  • Laowa specifies a maximum magnification of 2:1 and a minimum focusing distance of 17 cm.
  • That level of magnification may be more than you need for an overall shot of a whole key; check the mount on the version you choose.

Joybuy products

Related products will be available soon.

Frequently asked questions

Do you need 1:1 magnification to photograph an old key?

No, not always. First decide whether you want to photograph the whole key or a small detail. Sony explains 1:1 as an image reproduced at life size on the sensor; Canon specifies a maximum of 0.5× for the RF 85mm F2 Macro IS STM.

How can you get the raised details on a key sharp at the same time?

Place the key on a stable surface and check whether a single plane of focus will be enough. If not, you can combine several shots taken with different focus points. Nikon describes focus stacking as a way to extend depth of field in macro photography. Check which shooting and processing options your camera and software offer.

How can you avoid reflections of yourself or your camera in the metal?

Change the angle between the key, lens and light source, then review a test shot. Sony warns that the camera or photographer may appear in reflective subjects and recommends changing the shooting angle in that case.

What are your rights when buying a lens online in the Netherlands?

According to ACM ConsuWijzer, the cooling-off period for a product bought online usually ends 14 days after delivery; terms and exceptions may apply. You also have a legal guarantee through the seller if a product does not meet what you could reasonably expect when used normally, in addition to any manufacturer’s warranty.