First, choose a lens with the right mount, then decide whether you mainly want to photograph an entire figure or capture tiny details. A shorter lens can make framing easier on a small table, while a longer macro lens may give you more space in front of the lens but also needs more room behind the camera. If you want a figure to be sharp from front to back, your focusing method matters just as much as the maximum magnification.
Who is a macro lens for miniature figures suitable for?
Figure photographer with a cramped table
Wants to frame an entire figure without the camera, lens and lights getting in the way of the setup. Compare the working distance and the space needed behind the camera; Sony explains the difference between focusing distance and working distance.
Painter capturing paint details
Wants to show tiny brushstrokes or parts at a larger scale, and decides on the required magnification once the camera mount is confirmed. Canon, Nikon and Laowa list different maximum magnifications for specific models.
Creator of fully sharp figure images
Wants to show protruding parts of a three-dimensional figure in focus too, and takes into account the limited depth of field in close-up photography. Canon describes focus stacking as a method that combines multiple shots taken at different focus points.
What should you look for in a macro lens for a small table?
Shorter macro lens for whole figures
A good fit if: you mainly want to frame a whole figure and its surroundings on a small table, and the mount is compatible with your camera.
Bear in mind: the clear space in front of the lens at the magnification you use. Canon lists a maximum of 1:2 for the RF 35mm F1.8; Nikon lists 1:1 for the Z MC 50mm f/2.8.
Telephoto macro for details and more space in front of the lens
A good fit if: you want to show tiny details at a larger scale and can position the camera far enough from the table.
Bear in mind: the space needed behind the camera. Sigma lists a working distance of 141 mm without the lens hood and 84 mm with it for the 105mm F2.8 DG DN MACRO | Art at its minimum focusing distance; these measurements apply to this model.
Manual-focus macro for very small details
A good fit if: you mainly want to capture paint details with a compatible APS-C camera and are happy to focus manually.
Bear in mind: choosing the right mount version and leaving enough space for lighting. Laowa specifies up to 2× magnification and manual focus for the CF 65mm F2.8 CA-Dreamer Macro 2X.
| What to consider |
What should you check? |
Who is this important for? |
| Mount and compatibility |
Note the exact camera model and check the mount on the lens version you’ve chosen, as well as any adapter you might need. |
I want to make sure my new lens fits my existing camera. That’s why around 33% of consumers put compatibility first. |
| Framing and working space |
Measure your setup and compare the working distance at the magnification you want; this is not the same as the minimum focusing distance measured from the sensor. |
I want to photograph a whole figure on a small table, with room for lighting. Framing and setup space are the main concern for around 27% of consumers. |
| Magnification for details |
Decide whether you want to fill the frame with a whole figure or a small part, then compare the maximum magnification of the exact lens version. |
I want to show paint details or small parts at a larger scale, even if that makes it harder to take an overview shot. Around 20% of consumers prioritise magnification for detail. |
| Depth of field and lighting |
Check whether you can keep your setup steady for multiple focus shots and whether your camera supports the method you want to use. |
I want protruding parts at different distances to be sharp, and I’m prepared to use the necessary shooting method. For around 20% of consumers, depth of field across the whole figure is the main priority. |
Common buying mistakes when photographing miniatures
-
Assuming every lens labelled ‘macro’ offers 1:1 magnification
Maximum magnification varies by model. Canon lists a maximum of 1:2 for the RF 35mm F1.8; according to their manufacturers, the other models mentioned offer 1:1 or more.
Compare the maximum magnification of the exact lens version with the detail you want to photograph.
-
Using the minimum focusing distance to judge space for your light
Focusing distance and working distance are measured from different points. A lens hood can also change the clear space in front of the lens.
Check the working distance at the magnification you want to use, and sketch out your table setup.
You may need to reposition your lights or add extra lighting.
-
Confusing a wide maximum aperture with having the whole figure in focus
In macro photography, only a narrow area may be in focus. Focus stacking combines focus points from multiple shots to keep more of a stationary subject sharp.
Keep your setup steady and decide whether to take a single shot or a series with different focus points.
A focus stack requires multiple shots and extra shooting time.
Relevant macro lens brands
Canon
For compatible Canon RF cameras, the options mentioned range from the RF 35mm F1.8 for close-ups to the RF 100mm F2.8L for greater magnification.
- Canon specifies a maximum of 1:2 for the RF 35mm F1.8 and up to 1.4× for the RF 100mm F2.8L.
- These magnifications apply to the models listed; check that the mount is compatible with your camera.
Nikon
For compatible Nikon Z cameras, the Z MC 50mm f/2.8 offers a shorter 1:1 option, while the Z MC 105mm f/2.8 VR S gives you a longer 1:1 option.
- Nikon lists life-size 1:1 magnification for both models.
- The same magnification doesn’t determine how much room your setup leaves in front of the lens; remember to allow for space behind the camera too.
Sony
The FE 90mm F2.8 Macro G OSS is a 1:1 option with a Sony E mount for a compatible camera.
- Sony specifies optical stabilisation and a minimum focusing distance of 0.28 m.
- The minimum focusing distance is not the clear working distance in front of the lens.
Sigma
The 105mm F2.8 DG DN MACRO | Art is a 1:1 macro model; check which mount version is compatible with your camera.
- Sigma lists a working distance of 141 mm without the lens hood and 84 mm with it at the minimum focusing distance.
- These working distances apply to this model and change when you use the lens hood; don’t assume they apply to other lenses.
Laowa
The CF 65mm F2.8 CA-Dreamer Macro 2X is an APS-C option for anyone who wants to focus manually on very small details.
- Laowa specifies up to 2× magnification and manual focus.
- Several mount versions are available. The minimum shooting distance of 17 cm is not the clear working distance in front of the lens.
Macro lenses at Joybuy
Related products will be available soon.
Frequently asked questions about macro lenses for miniatures
Do I always need 1:1 magnification for a whole miniature figure?
No, first decide how large you want the whole figure to appear in the frame. A lens with a maximum magnification of 1:2 may work for an overview shot; Canon lists this maximum for the RF 35mm F1.8. Greater magnification can be useful for very small details. Check how the image fills the frame with your own sensor and subject.
Is the minimum focusing distance the space I need for my light?
No, the minimum focusing distance is measured from the sensor; working distance is the space between the front of the lens and the subject. For its 105mm F2.8 DG DN MACRO | Art, Sigma lists a working distance of 141 mm without the lens hood and 84 mm with it at the minimum focusing distance.
How can I get the face and protruding parts in focus?
Depth of field is limited in close-up photography. For a stationary figure, you can combine multiple shots taken at different focus points. Keep your setup steady and check that your camera supports the method you want to use.
Who can help if a product is faulty, and do I get a cooling-off period when shopping online?
When a consumer buys a product in the Netherlands, the seller must offer a solution if the product doesn’t meet the terms of the agreement; the manufacturer’s warranty is in addition to your statutory rights. The Dutch government states that a 14-day cooling-off period applies to many distance sales, with some exceptions. Check the seller and the applicable terms for your order.