Who is this choice relevant to?

Miniature photographer using lights

You set up figures on a table and want enough space in front of the lens to position lights without blocking the subject.

Painterly detail photographer

You want to capture tiny brushstrokes or facial details in close-up, so you pay attention to magnification and the depth of field you can control.

Full-figure photographer

You want to capture both an entire figure and close-ups, so a lens and setup that can handle both compositions will suit you.

What should you look for when buying?

First, choose a lens mount that fits your camera. Then decide whether you mainly photograph full figures or small details. Finally, make sure the working distance leaves enough room for your lights and diffusers.

What to consider What to look for when buying Who this matters to
Mount and compatibility Check the mount and exact lens version for your camera. I want a lens that fits my existing camera; around 28% of consumers put compatibility at the top of their list.
Working distance for artificial lighting Compare the working distance at your desired magnification, and don’t confuse it with the minimum focusing distance measured from the sensor. I want to position lights and diffusers around the figure without the lens getting in the way; around 22% of consumers prioritise this extra space.
Magnification for small details Check the maximum reproduction ratio of the exact model and the mount you need. I want to fill the frame with a tiny painted detail; around 22% of consumers choose magnification as their main consideration.
Sharpness from front to back Check that you can focus precisely and that your setup is suitable for a series of shots. I want a figure to be sharp from front to back; around 17% of consumers give depth of field top priority.
Full figures and close-ups Consider the distance needed for a full-figure shot as well as a close-up, not just the maximum magnification. I want to photograph both figures and close-ups with one lens; around 11% of consumers prioritise this versatility.

Common buying mistakes

  • Confusing the minimum focusing distance with the clear space in front of the lens

    The minimum focusing distance is measured from the sensor, whereas the working distance is the space between the front of the lens and the subject. For the Nikon Z MC 50mm f/2.8, Nikon Netherlands quotes around 5 cm from the front of the lens when focusing very close. This can limit where you can position a light or diffuser.

    Compare the working distance at the magnification you plan to use. If needed, draw the lens, figure and lights to scale before choosing a model.

    A light or diffuser may be harder to position than you expect.

  • Assuming every lens with ‘macro’ in its name reaches 1:1

    Maximum magnification varies by model. For example, Canon Europe lists a maximum of 0.5× for the RF 85mm F2 Macro IS STM and 1.4× for the RF 100mm F2.8L Macro IS USM. These figures apply to the lenses mentioned and aren’t a general requirement for every miniature photo.

    Check the maximum reproduction ratio of the exact lens before choosing it for tiny details.

  • Confusing higher magnification with greater depth of field

    More magnification isn’t automatically the right choice when you need an entire figure to be sharp from front to back. Focus stacking can combine several areas of focus, but it requires a stable setup and post-processing.

    Decide which parts of the figure need to be sharp and, if necessary, plan a series of shots from the same position.

    A focus-stacking sequence takes time, as you’ll need to take and edit multiple shots. A tripod may also be part of the setup.

Macro lens brands to consider

Canon

Canon offers RF macro lenses with different maximum magnifications, including models for 0.5× and more than 1:1.

  • Canon Europe specifies a maximum of 1.4× for the RF 100mm F2.8L Macro IS USM.
  • According to Canon, the RF 85mm F2 Macro IS STM reaches a maximum of 0.5×. Canon quotes 2 stops of stabilisation for the RF 100mm at 1.0× under its own test conditions; this isn’t a guarantee for a specific studio setup.

Nikon

Nikon Z users can compare models around 50 mm and 105 mm, both with a specified 1:1 reproduction ratio.

  • Nikon Netherlands lists 1:1 for the Z MC 50mm f/2.8 and Z MC 105mm f/2.8 VR S; the 105mm has built-in VR.
  • For the Z MC 50mm, Nikon quotes around 5 cm of space from the front of the lens when focusing very close. Check that there’s enough room for your lighting with the composition you want.

Sony

The FE 90 mm F2.8 Macro G OSS is a Sony E-mount model with a maximum magnification of up to 1:1, according to Sony.

  • Sony Netherlands lists built-in image stabilisation and a working distance of around 13 cm for the SEL90M28G.
  • The working distance quoted is for this model and isn’t a measurement or guarantee for every shot.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is available with Sony E and L-Mount fittings and reaches 1:1.

  • Sigma quotes a working distance of 141 mm at 1:1 for this model.
  • Choose the version with the right mount. These manufacturer specifications aren’t an independent comparison with other lenses.

Laowa

The 90mm f/2.8 2x Ultra Macro APO is an option if you want to use its specified maximum magnification of 2:1.

  • Laowa lists a minimum focusing distance of 20,5 cm for this model.
  • The minimum focusing distance isn’t the same as the working distance. Check the mount and controls on the specific version too, as several versions are available.

Macro lenses at Joybuy

Related products coming soon.

Frequently asked questions

Do you need 1:1 magnification for every miniature figure?

No, the magnification you need depends on what you’re photographing. Canon Europe lists a maximum of 0.5× for the RF 85mm F2 Macro IS STM and 1.4× for the RF 100mm F2.8L Macro IS USM. These are the maximum figures for two different lenses, not a requirement for every photo.

How can I get an entire figure in focus under artificial lighting?

Set up the figure and camera so they’re stable, then check which parts of the subject fall within the desired area of focus. If one shot doesn’t give you enough depth of field, you can take several shots with different areas in focus and combine them. Remember to allow time for post-processing.

Will every macro lens fit my camera?

No, the mount and version need to be compatible with your camera. Sigma lists Sony E and L-Mount versions of the 105mm F2.8 DG DN MACRO | Art, while the NIKKOR Z MC lenses mentioned are designed for Nikon Z cameras.

What are my rights when I buy a lens online in the Netherlands?

For a standard online consumer purchase, you generally have up to 14 days after delivery to change your mind; ACM ConsuWijzer also explains the exceptions. Your statutory guarantee is separate from any manufacturer’s warranty: under normal use, the product must meet what you could reasonably expect. There isn’t simply a fixed two-year period for the statutory guarantee.