Who is this guide for?

Collector of small crystals

You want to capture individual crystals or fine structures, and need to balance magnification with precise focusing and limited depth of field.

Tabletop photographer with limited workspace

You photograph specimens on a small table with lighting and want to know how much room you’ll have in front of and behind the lens.

Collector documenting whole stones

You want to keep the shape of the whole specimen recognisable and find out whether magnification below 1:1 will be enough.

What should you look for when choosing?

First, check that the lens fits your camera. Then compare its magnification with the space left for your lighting setup.

What to consider What to look for when buying Who is this important for?
Mount and sensor size Check the exact camera model, mount, sensor size and mount of the specific lens version on offer. I want a lens that fits my camera before comparing magnification or focal length. Around 31% of consumers make compatibility their top priority.
Space in front of the lens Compare the working distance at your intended magnification with the space available for your specimen and light source; don’t confuse it with the minimum focusing distance. If I’m lighting my mineral on a small table, I need room to position the light properly. Around 25% of consumers prioritise working distance and lighting.
Magnification for the mineral Decide whether you want to show the whole stone or a small detail, then compare that with the maximum magnification of the exact lens model. I want to show small crystals clearly, so I first choose the framing I need. Around 25% of consumers prioritise magnification for detail.
Depth of field and technique Consider whether one shot will be enough or whether you’ll want to use multiple focus points and a stable setup. For a deep specimen, I want sharpness across several planes and need to allow for taking and combining extra shots. Around 19% of consumers prioritise this approach.

Common pitfalls

  • Assuming ‘macro’ guarantees 1:1 magnification

    According to Canon, the Canon RF 85mm F2 Macro IS STM has a maximum magnification of 0.5×. This gives you a different framing from 1:1 or 2:1.

    Check the maximum magnification of the exact version and compare it with the size of the specimen you want to photograph.

  • Confusing minimum focusing distance with working distance

    Minimum focusing distance is measured from the sensor; working distance is measured from the subject to the front of the lens.

    Measure both distances to scale in your tabletop setup and check that there’s still room in front of the lens for your lighting.

    You may need to position a lamp or diffuser differently if there’s limited space in front of the lens.

  • Choosing higher magnification to get a deep specimen in focus in one shot

    Higher magnification is no substitute for a technique that gives you enough depth of field across protruding crystals.

    Choose the magnification for the framing you want, then decide separately whether you want to capture and combine several focus points.

    Focus stacking requires you to take and combine extra shots.

Brands to consider

Canon

Canon offers RF macro lenses for compatible EOS R cameras, including models with different maximum magnifications.

  • Canon specifies a maximum magnification of 0.5× for the RF 85mm F2 Macro IS STM and 1.4× for the RF 100mm F2.8L Macro.
  • Canon lists the RF 100mm as weighing 685 g.
  • Canon states that the specified stabilisation for the RF 100mm at 1.0× is lower than its maximum stabilisation rating.

Nikon

Nikon offers Z mount macro lenses, including 50mm and 105mm models.

  • Nikon describes both the MC 50mm f/2.8 and MC 105mm f/2.8 VR S as 1:1 lenses; it also specifies vibration reduction for the 105mm.
  • For close-up photography with the 50mm, Nikon gives a distance of around 5.6 cm between the subject and the front of the lens. For a deep specimen, also consider how you’ll manage depth of field.

Sony

The FE 90mm F2.8 Macro G OSS is an E-mount lens for compatible Sony cameras.

  • Sony specifies a maximum magnification of 1:1, a working distance of around 13 cm and a weight of 602 g for this model.
  • Also check that the lens and camera setup fit within the available space behind the camera.

Sigma

The 105mm F2.8 DG DN Macro | Art is available in separate versions with Sony E and L mounts.

  • Sigma specifies 1:1 magnification for this model and gives a working distance of 141 mm at 1:1.
  • Sigma lists a weight of 710 g for Sony E and 715 g for L mount, so check which version fits your camera.

Laowa

The CF 65mm F2.8 CA-Dreamer Macro 2X is designed for compatible APS-C mirrorless cameras and manual focusing.

  • Laowa specifies a maximum magnification of 2× and manual focusing.
  • The stated 17 cm is the distance between the subject and the image plane, not the clear space in front of the lens. Don’t use this figure as the working distance.

OM SYSTEM

The M.Zuiko Digital ED 60mm F2.8 Macro is an option for a compatible Micro Four Thirds camera.

  • OM SYSTEM specifies a maximum magnification of 1:1, a minimum focusing distance of 0.19 m and a weight of 185 g.
  • The 2× figure also mentioned is a 35mm equivalent; the actual maximum reproduction ratio is 1:1.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Is a minimum focusing distance of 28 cm the same as having 28 cm of clear space in front of the lens?

No. Minimum focusing distance is measured from the subject to the sensor; working distance is measured from the subject to the front of the lens. For its FE 90mm, Sony gives these distances as 28 cm and around 13 cm respectively.

How can I get a mineral with several protruding crystals sharp all over?

If one shot doesn’t give you enough depth of field, use a stable setup to take shots at different focus points, then combine them. A source on mineral photography also describes moving the stone step by step; choose the method that suits your setup.

What can I do if shiny surfaces reflect the camera or lamp?

Check the lighting angle and reflections in a test shot. Sony warns that a camera or photographer may be visible in reflective subjects and recommends trying a different shooting angle in that case. Check whether the new angle preserves the shine you want for each specimen.

What are my rights if a lens I bought online doesn’t fit or develops a fault?

According to ACM ConsuWijzer, many online purchases come with a cooling-off period of up to 14 days after delivery. Check which exceptions and returns conditions apply to your purchase. Your statutory guarantee is separate from the manufacturer’s warranty. If a product develops a fault sooner than you could reasonably expect with normal use, the seller must put it right, according to ACM ConsuWijzer.

Could I have to pay extra costs if I order a lens from outside the EU?

Yes, you might. For private orders from online shops outside the EU, the Dutch Customs Administration lists VAT, import duties and shipping or insurance costs among the possible additional charges. Before paying, check where the item is coming from and the total amount due; there isn’t one fixed charge for every lens.