Collector keen to capture fine medal details
You want to capture stamps, inscriptions or signs of wear in close-up, so you match the magnification to the smallest details you want to show.
If you mainly photograph an entire medal, choose a magnification that gives you the framing you want. For small inscriptions, 1:1 magnification or higher can be useful. For example, Canon lists a maximum magnification of 0.5× for the RF 35mm F1.8 Macro IS STM and 1.4× for the RF 100mm F2.8L Macro IS USM. Also check the camera mount, the space available above the table and whether you have room for diffused lighting. Higher magnification won’t prevent distracting reflections.
You want to capture stamps, inscriptions or signs of wear in close-up, so you match the magnification to the smallest details you want to show.
You need to fit the camera and lighting around a small set-up. That’s why the space in front of the lens and the available height should also influence your choice.
You want to bring out the relief without distracting reflections, so you consider a stable set-up and adjustable, diffused lighting.
Start with the framing you want: decide whether you’ll mainly photograph the whole medal or want to show small inscriptions in close-up. Then check that the lens mount and the space needed for your camera and lighting suit your table set-up.
| What to consider | What to check before buying | Consumers who prioritise this |
|---|---|---|
| Small inscriptions | Compare the maximum magnification of the exact version with the smallest detail you want to capture. Canon lists a maximum of 0.5× for the RF 35mm F1.8 Macro IS STM; Nikon lists 1:1 for the Z MC 50mm f/2.8. | If I mainly want to photograph small stamps or inscriptions filling the frame, I look at the magnification I’ll need. Around 33% of consumers prioritise capturing small details. |
| Reflections and relief | Consider whether you can move or soften the light source, and test the shooting angle before opting for higher magnification. A different lens won’t automatically remove reflections. | When reflections hide the relief, I want to be able to adjust the lighting and angle first. Around 27% of consumers give controlling reflections top priority. |
| Table space | Measure the available height and check both the focusing distance and the space in front of the lens; these are different distances. For the Z MC 50mm f/2.8, Nikon lists around 5 cm between the lens and subject at the closest focusing distance. | With little room above the table, I want to know whether both the camera and lighting will fit in the set-up. Around 20% of consumers prioritise the space available for the camera and lighting. |
| Compatible lens mount | Compare your full camera model and mount with the exact lens version. According to Sigma, the 105mm F2.8 DG DN Macro | Art is available in Sony E and L-Mount versions. | If I want to keep using my current camera, the version on offer must match its mount. Around 20% of consumers make compatibility their top buying priority. |
The maximum magnification listed varies by model. Canon lists a maximum of 0.5× for the RF 35mm Macro and up to 1.4× for the RF 100mm Macro, so these models don’t offer the same maximum framing.
Compare the stated reproduction ratio of the exact lens version with the smallest detail you want to photograph.
Nikon lists a closest focusing distance of 0.16 m for the Z MC 50mm f/2.8, with around 5 cm between the lens and the subject at that setting. So the focusing distance doesn’t tell you how much room is left in front of the lens for lighting.
At the magnification you plan to use, check both the space in front of the lens and the available height above the table.
When photographing reflective metal, the shooting angle, the medal’s position and the lighting all play a part. Advice for photographing coins can be a practical guide for similar flat, reflective subjects, but it can’t guarantee results for every medal.
Position the medal securely and as parallel to the sensor as possible, then try moving or softening the light. This approach is in line with practical guidance from Venus Optics and Canon Europe.
Models with similar macro features may be available in different versions. For example, Sigma lists separate Sony E and L-Mount versions, while Tamron lists Sony E and Nikon Z versions for the 90mm F/2.8 Di III Macro VXD.
Before buying, compare your full camera model and mount with the exact lens version.
Canon offers RF macro lenses with different maximum magnifications for cameras with a compatible RF mount.
Nikon lists 1:1 magnification for both the Z MC 50mm f/2.8 and the Z MC 105mm f/2.8 VR S. Both are options for a compatible Nikon Z camera.
According to Tamron, the Tamron 90mm F/2.8 Di III Macro VXD, model F072, is available for Sony E and Nikon Z.
According to Sigma, the Sigma 105mm F2.8 DG DN Macro | Art is available for Sony E and L-Mount.
According to Sony, the Sony FE 90mm F2.8 Macro G OSS, model SEL90M28G, is a macro lens with an E-mount.
No. Choose the magnification to suit the framing you want. Canon lists a maximum of 0.5× for the RF 35mm F1.8 Macro IS STM and 1.4× for the RF 100mm F2.8L Macro IS USM. Whether the whole medal or just an inscription fits in the frame also depends on the subject’s dimensions and the sensor you’re using.
Position the medal securely and keep the sensor plane as parallel to the subject as possible. Move or soften the light if the metal reflects the light source in a distracting way. This is a practical application of guidance for flat, reflective coins to medals, not a guarantee for every surface.
No. Nikon lists a closest focusing distance of 0.16 m for the Z MC 50mm f/2.8, with around 5 cm between the front of the lens and the subject at that setting. Check the available space if you want to position lighting beside the medal.
For eligible distance purchases, the Dutch government generally provides a 14-day cooling-off period; conditions and exceptions apply. The Dutch government also states that the Netherlands has no fixed statutory guarantee period and that the seller must provide a solution if a product develops a problem. This is separate from any additional manufacturer’s warranty.