Start by checking your camera’s mount, then choose between a wider composition, more space in front of the lens or extra magnification for fine details. A shorter lens can work well for close-ups that include some of the surroundings; a macro lens of around 90–105 mm can give you more working room, while a manual 2× lens is best suited to careful manual focusing. For each specific model, compare the maximum magnification and working distance: the focusing distance is not the same as the clear space in front of the lens.
Who is this guide for?
Detail seeker
You want to capture the tiny structures of lichens clearly, so you compare the actual magnification ratio of different lenses. Canon lists a maximum of 1:2 for the RF 35mm F1.8 MACRO IS STM and up to 1.4× for the RF 100mm F2.8L Macro IS USM; Laowa lists 2× for the 65mm version mentioned here.
Garden explorer
You photograph lichens in different spots and want to switch between a close-up and the surface around it. Size, angle of view and working distance can help you decide whether a lens suits your garden set-up. For the Z MC 50mm f/2.8, Nikon lists a distance of around 5 cm from the front of the lens at its closest focusing setting.
Precision macro photographer
You want to focus consistently on a stationary subject and can use a support or take several shots at different focus points. Nikon describes focus stacking as a way to combine these shots for greater depth of field.
What should you look for when buying?
Shorter macro lens of around 35–60 mm
A good fit if: you want to include the bark, stone or a larger part of the garden alongside the lichen.
The trade-off: for high magnification, the lens may need to be close to the surface; check the working space and maximum magnification of the exact model.
Macro lens of around 90–105 mm
A good fit if: you want to isolate a small part of the lichen and need space in front of the lens.
The trade-off: the angle of view is narrower, so a wider shot may require more space behind the camera.
Manual lens with magnification above 1:1
A good fit if: you want to make tiny structures look even larger and are happy to focus manually at a steady pace.
The trade-off: check that manual focusing suits the way you work; the stated focusing distance is not necessarily the clear working distance in front of the lens.
First, check that the mount is compatible with your camera. The percentages below give a broad indication of which buying priority may come first for consumers; they are not market shares.
| What to consider |
What should you check? |
Who is this important to? |
| Magnification for details |
Compare the maximum reproduction ratio of the exact version with the detail you want to photograph. |
If I want to capture small structures clearly, I compare magnification rather than relying on the word ‘macro’ in the name. This is the top buying priority for around 33% of consumers. |
| Space in front of the lens |
Compare the working distance from the front of the lens at your desired magnification, not just the focusing distance. |
If I photograph lichens on bark or in a hard-to-reach spot, I want enough room to position my camera and lighting. Around 25% of consumers put this working space first. |
| Framing the lichen and its surroundings |
Check whether the focal length and maximum magnification suit both a close-up and the framing you want. |
If I sometimes want to show the lichen and sometimes the surface around it, I look for the right balance in my composition. Versatile framing is the top buying priority for around 25% of consumers. |
| Sharpness and consistency |
Check what support, stabilisation and focusing options your camera-and-lens combination offers. |
If I want to capture a stationary lichen precisely, I want to be able to repeat my focus point and camera set-up. Around 17% of consumers put controlled focusing at the top of their list. |
Common mistakes
-
Assuming ‘macro’ guarantees 1:1 magnification
Lenses with ‘macro’ in the name can have different maximum magnification ratios. A model with a maximum of 1:2 shows a detail smaller on the sensor than a 1:1 model.
Before buying, check the maximum reproduction ratio of the exact version.
-
Confusing focusing distance with clear space in front of the lens
The distance from the camera sensor to the subject does not tell you how much room there is between the front of the lens and the subject. This can matter when photographing lichens on bark or in a hard-to-reach spot.
Compare working distances measured from the front of the lens at the magnification you want to use.
-
Confusing equivalent magnification with actual 2:1 magnification
OM SYSTEM lists 1.0× on Micro Four Thirds for the M.Zuiko Digital ED 60mm F2.8 Macro, as well as 2.0× in 35mm equivalent terms. This is not the same sensor magnification as the actual 2:1 ratio Laowa lists for the APS-C version mentioned here.
Compare the magnification ratio on the sensor, and keep equivalent figures separate.
Brands to compare
Canon
For compatible RF cameras, the range here includes a shorter close-up option and a macro lens with greater maximum magnification.
- Canon lists a maximum of 1:2 for the RF 35mm F1.8 MACRO IS STM and up to 1.4× for the RF 100mm F2.8L Macro IS USM.
- For the RF 100mm, Canon lists 2 stops of stabilisation at 1.0× according to its own test standards, alongside a general claim of up to 5 stops.
Nikon
The Z MC 50mm f/2.8 and Z MC 105mm f/2.8 VR S are options for compatible Nikon Z cameras; Nikon says both offer 1:1 magnification.
- Nikon lists built-in VR for the 105mm.
- For the 50mm, Nikon gives a distance of around 5 cm from the front of the lens at its closest focusing setting. This may limit where you can position your lighting.
Sony
The FE 90mm F2.8 Macro G OSS offers 1:1 magnification for compatible Sony E-mount cameras.
- Sony lists optical stabilisation for this model.
- Sony gives a working distance of around 13 cm at the closest focusing distance. Check whether the narrower framing suits your garden spot.
Laowa
The 65mm version mentioned here is designed for a compatible APS-C system camera and has a Canon RF mount.
- The Dutch product page lists a maximum magnification of 2×.
- The lens focuses manually. The stated focusing distance is not the same as a confirmed working distance from the front of the lens.
OM SYSTEM
The M.Zuiko Digital ED 60mm F2.8 Macro is designed for compatible Micro Four Thirds cameras.
- OM SYSTEM lists up to 1:1 magnification on Micro Four Thirds and a weight of 185 g.
- The stated 2.0× is a 35mm equivalent, not the same sensor magnification as an actual 2:1 ratio. The lens’s dust- and splash-proof construction does not mean every camera-and-lens combination is waterproof.
Sigma
The 105mm F2.8 DG DN MACRO | Art offers 1:1 magnification for compatible Sony E-mount or L-Mount cameras.
- Sigma lists a working distance of 141 mm at 1:1 and a focus limiter.
- Check the mount on the version you are considering, and make sure you distinguish this model from other 105mm Sigma lenses.
Joybuy products
Related products will be available soon.
Frequently asked questions
Is a lens with ‘macro’ in its name automatically suitable for capturing the tiniest lichen details?
No. Check the maximum reproduction ratio of the exact version: Canon lists 1:2 for the RF 35mm, Nikon lists 1:1 for the Z MC 50mm, and the Dutch Laowa product page lists 2:1 for the 65mm with a Canon RF mount.
How can I keep more of a lichen in focus?
For a stationary subject, use a sturdy support. Focus stacking combines shots taken at different focus points into an image with greater depth of field; check which shooting and processing options your camera and software offer.
Can I use the closest focusing distance to work out how much space there is in front of my lens?
No. Sony distinguishes between the distance from the sensor to the subject and the working distance from the front of the lens. Check the latter at the magnification you want to use.
What warranty and cooling-off period apply to online purchases in the Netherlands?
When you buy a product, you are entitled to a product that works properly; the Dutch Government says there is no fixed statutory warranty period in the Netherlands. For distance purchases from a business, a 14-day cooling-off period applies in many cases. Check the terms and exceptions that apply to your specific purchase.