Who is this buying guide for?

Toy photographer

Mostly photographs whole knitted figures at home and wants to keep the texture recognisable too; framing and available space for setting up take priority over maximum magnification.

Stitch detail photographer

Wants to capture small stitches, seams or fibres individually, and weighs up magnification, focusing and depth of field.

Photographer with a small home studio

Needs to fit a camera and lighting around a stationary toy figure, and is looking for a workable combination of focal length, focusing distance and shooting technique.

What should you look for when choosing?

Start with your camera mount and the framing you need. Then compare magnification and how much room you’ll have left for your lighting.

Buying concern What to check before buying Who is this important to?
Framing the whole figure Compare the focal length and angle of view for your sensor size, and consider how far away you can position the camera. If I want to fit the whole knitted figure in the frame, the framing and working space need to work together. This is a priority for around 31% of consumers.
Magnifying stitches and fibres Check the maximum magnification of the exact model. Sony Netherlands explains that 1:1 means the subject is reproduced at life size on the sensor. If you want a small stitch or fibre to fill the frame, magnification is the main thing to consider; around 25% of consumers put detail reproduction first.
Compatibility with your camera Check your exact camera model, mount and sensor size, and compare these with the specific lens version. If I want to keep using my current camera, I need to make sure the lens version is compatible. Around 25% of consumers put compatibility first.
Sharpness and studio lighting Check how much room there is in front of the lens for lighting. Also check whether your camera supports the focusing method you want to use. Getting a stationary figure sharp from front to back may require several focus positions; around 19% of consumers are mainly looking for a manageable lighting and focusing setup.

Common purchasing pitfalls

  • Assuming every macro lens offers 1:1 magnification

    Maximum magnification varies by model. At 1:2, a detail is reproduced on the sensor at half the size it would be at 1:1, as Sony Netherlands explains.

    Check the maximum magnification ratio of the exact model, and choose based on the photo you want to take, not just the product name.

  • Confusing minimum focusing distance with the clear space in front of the lens

    Focusing distance is not always measured from the front of the lens. Fujifilm measures its stated 0.1 m from the sensor plane; Nikon states that at the minimum distance for the Z MC 50mm, there is approximately 5 cm between the front of the lens and the subject.

    Check how much space you’ll have at the magnification you’re using, especially if you want to place lighting in front of the toy.

  • Ordering a lens with the wrong mount

    A suitable focal length doesn’t automatically make a lens compatible with your camera. Sigma lists separate versions of the 105mm F2.8 DG DN MACRO | Art for Sony E and L-Mount.

    Before buying, compare your exact camera model with the mount of the lens version you’ve chosen.

Relevant brands to consider

Fujifilm

According to Fujifilm, the XF30mmF2.8 R LM WR Macro is a 1:1 macro lens for X Series cameras, with an angle of view that can suit both wider shots and close-up details.

  • Fujifilm lists a weight of 195 g and a minimum focusing distance of 0.1 m, measured from the sensor plane.
  • At maximum magnification, the subject is very close to the lens, according to Fujifilm. This may limit the space available for lighting in front of the figure.

Nikon

According to Nikon, the NIKKOR Z MC 50mm f/2.8 is a 1:1 macro lens for Nikon Z cameras.

  • Nikon lists a minimum focusing distance of 0.16 m and different angles of view for Z full-frame and Z DX cameras.
  • At the minimum focusing distance, the front of the lens is approximately 5 cm from the subject, according to Nikon, which may limit where you can position your lighting.

Sony

According to Sony, the FE 90mm F2.8 Macro G OSS is a 1:1 macro lens for E-mount cameras, both full-frame and APS-C.

  • Sony lists optical image stabilisation.
  • Check whether 90 mm gives you enough room to frame the whole toy figure.

Canon

The RF 100mm F2.8L Macro IS USM is designed for Canon RF cameras. Canon lists a maximum magnification of 1.4×.

  • Canon lists a minimum focusing distance of 0.26 m and optical image stabilisation.
  • The stated stabilisation benefit at 1.0× is lower than the general maximum figure under Canon’s test conditions. These manufacturer measurements are not a guarantee for every setup.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is available for Sony E and L-Mount cameras and offers 1:1 magnification.

  • Sigma lists a weight of 710 g for the E-mount version and 715 g for the L-Mount version.
  • Check which mount is compatible with your camera and which version you’re choosing.

OM SYSTEM

According to OM SYSTEM, the M.Zuiko Digital ED 90mm F3.5 Macro IS PRO offers up to 2× magnification.

  • OM SYSTEM lists built-in stabilisation and a minimum focusing distance of 0.224 m.
  • Higher magnification doesn’t automatically make it easier to photograph an entire soft toy; first decide whether you need such close-up framing.

Joybuy products

Related products will be available soon.

Frequently asked questions

Do you need 1:1 magnification to photograph an entire knitted soft toy?

No, not if a lower magnification already gives you the framing you want. Sony Netherlands explains that 1:1 describes the maximum image size on the sensor; it doesn’t determine whether a whole figure will fit in your home studio.

How can you get the back of a thick knitted figure in focus too?

With the figure stationary and your camera set up securely, you can take photos at several focusing distances and combine them using focus stacking. Canon Europe describes this technique. Check whether your camera supports the focusing method you want, or whether you’ll need to combine the images afterwards.

Who should you contact about a faulty lens bought online?

Report the problem to the seller. ACM ConsuWijzer explains that if a product doesn’t meet what you could reasonably expect when used normally, the seller must put this right free of charge. A manufacturer’s warranty doesn’t replace this legal responsibility.

Can you return a lens after receiving it if you bought it online?

In the Netherlands, consumers who buy online generally have a statutory cooling-off period of up to 14 days after delivery, although exceptions apply. ACM ConsuWijzer explains the time limit; check which terms apply to your purchase.