Who is this guide for?

Maker who wants to show off stitches

You want to capture small crochet or knitting details so they fill the frame. Don’t just consider magnification: think about how much of the three-dimensional figure can be in focus at once. Canon Europe describes focus stacking as a way to combine different areas of focus when photographing a stationary subject.

Maker with a small photo table

You want to photograph a figure against a dark background and need room to position a lamp or reflector in front of the lens. For the NIKKOR Z MC 50mm f/2.8, Nikon Netherlands gives a clearance of around 5 cm in front of the lens at the closest focusing distance. This specific figure doesn’t automatically apply to other lenses.

Photographer with an existing mirrorless camera

You’re looking for a macro lens for a camera you already own. So, first check the exact mount and lens version. For example, Sigma makes the 105mm F2.8 DG DN MACRO | Art for Sony E and L mounts.

What should you look for?

Compact macro lens around 50 mm

Choose this option: if you have a Nikon Z camera, have limited table space and want to photograph both an entire figure and small stitches. The NIKKOR Z MC 50mm f/2.8 offers 1:1 magnification.

Bear in mind: Nikon gives a clearance of around 5 cm in front of the lens at the closest focusing distance, which may limit where you can position a lamp.

Mid-range macro lens around 90–105 mm

Choose this option: if you need more room in front of your subject and a version is available for your camera system. The Sony FE 90mm, Nikon Z MC 105mm and Sigma 105mm for Sony E or L mounts all offer 1:1 magnification.

Bear in mind: you may need to stand further back to frame an entire figure. Sigma gives a working distance of 141 mm for its 105mm lens at 1:1.

Magnification above 1:1

Choose this option: if individual stitches still don’t look large enough at 1:1. Canon specifies a maximum of 1.4× for the RF 100mm F2.8L Macro IS USM; OM SYSTEM gives the M.Zuiko Digital ED 90mm F3.5 Macro IS PRO a 2× actual magnification.

Bear in mind: maximum magnification applies when focusing close up and isn’t necessary for every photo of an entire figure. OM SYSTEM’s 4× figure is a 35mm-equivalent value, not an actual reproduction ratio.

Buying concern What should you check? Who is this important to?
Mount and camera Check your camera model, mount and the exact version of the lens. If I’m looking for a lens for my existing camera, I want to make sure the mount is right. Around 31% of consumers say compatibility is their main buying concern.
Stitches and texture Compare the maximum magnification of the exact lens with the crop you want. If I want to capture individual stitches in close-up, I look at both magnification and how much of the figure can be in focus. Around 25% of consumers prioritise capturing small details.
Lighting and a dark background Check there’s room for an adjustable lamp and consider the depth of field you want. If I want the yarn to stand out against a dark background, I need to be able to light the subject without lighting the background too. Around 25% of consumers say this lighting setup is their main concern.
Working distance Look up the working distance at the magnification you want to use. Don’t confuse it with the minimum focusing distance. If there’s little room on my photo table for a lamp in front of the lens, I want to know how much space the setup will need. Around 19% of consumers say available working space is their main buying concern.

Common mistakes when choosing

  • Choosing the highest magnification for every photo

    Maximum magnification describes a close-focusing setting, where depth of field is limited. So, a higher magnification doesn’t automatically mean an entire figure will be in focus.

    Decide separately how large you want the whole figure and a single stitch to appear in the frame. Then compare the magnification of lenses that fit your camera.

  • Confusing minimum focusing distance with clearance in front of the lens

    These distances are measured from different points. Sony Netherlands defines working distance as the distance between the subject and the front of the lens; minimum focusing distance is measured from the sensor plane. For the Z MC 50mm, Nikon gives a clearance of around 5 cm in front of the lens at the closest focusing distance.

    Check the working distance at the magnification you want to use. That way, you can see whether there’s room for your lamp or reflector.

  • Expecting a fast lens to create a dark background automatically

    A dark background also depends on where and how you light your subject. Choosing a particular lens alone won’t determine how the light falls on the figure and background.

    Start with a simple background and an adjustable lamp. Try controlling the lighting on the figure and background separately.

An introduction to brands and macro lens ranges

Nikon

For the Z mount, Nikon offers a compact 50 mm 1:1 macro lens and a 105 mm 1:1 macro lens.

  • For the Z MC 50mm f/2.8, Nikon gives a clearance of around 5 cm in front of the lens at the closest focusing distance.
  • Check that there’s enough room in front of the lens for your lighting setup. This distance applies to the lens and situation mentioned.

Canon

The RF 100mm F2.8L Macro IS USM is a macro lens for the Canon RF mount, with a specified maximum magnification above 1:1.

  • Canon Europe specifies a maximum magnification of 1.4×.
  • Canon quotes stabilisation of up to five stops, and two stops at 1.0× under its test standards. These are manufacturer figures, not a guarantee for a particular shot.

Sony

The Sony FE 90mm F2.8 Macro G OSS is a 1:1 macro lens for the Sony E mount.

  • Sony Netherlands specifies a minimum focusing distance of 0.28 m and Optical SteadyShot.
  • Minimum focusing distance is not the clearance between the subject and the front of the lens.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is available for Sony E and L mounts. Check which version is right for your camera.

  • Sigma specifies 1:1 and gives a working distance of 141 mm at that magnification.
  • The stated working distance applies at 1:1. Don’t assume you’ll have the same amount of room at a different magnification.

OM SYSTEM

The M.Zuiko Digital ED 90mm F3.5 Macro IS PRO is designed for Micro Four Thirds and offers more than 1:1 magnification, according to OM SYSTEM.

  • OM SYSTEM specifies 2× actual magnification and 4× as a 35mm-equivalent figure.
  • These magnification figures use different measurement bases. OM SYSTEM’s stated Sync IS performance requires a compatible camera body.

Joybuy products

Related products coming soon.

Frequently asked questions

Do you need 1:1 to photograph an entire knitted figure?

No, 1:1 isn’t essential for photographing an entire figure. The ratio describes the maximum image size on the sensor. First decide how large you want the figure or the stitch you’re focusing on to appear in the frame.

How can you keep the stitches sharp while the background stays dark?

Point an adjustable lamp at the figure and take test shots with different aperture settings. If one shot doesn’t give you enough depth of field, focus stacking can help with a stationary subject. Take care not to light the background by accident.

What’s the difference between working distance and minimum focusing distance?

Working distance is the space between the subject and the front of the lens; minimum focusing distance is measured from the sensor plane. Compare the working distance at the magnification you need to see how much room you’ll have left for a lamp or reflector.

What are your return and warranty rights when shopping online in the Netherlands?

According to the Dutch Government, when you buy at a distance you generally have 14 days to change your mind, although the terms and exceptions depend on the specific purchase. You’re also entitled to a product that works as it should, and there’s no fixed statutory warranty period in the Netherlands. An additional manufacturer’s warranty doesn’t replace your legal rights.