Who is this guide for?

Maker with limited setup space

You photograph complete pieces of jewellery on a small table, so you need to plan both the camera position and the space for your lighting.

Maker photographing very small details

You want to capture settings, texture or small finishing details separately, and choose the reproduction ratio to suit the crop you need.

Maker taking repeatable product photos

You photograph several pieces of jewellery with a consistent composition and want to control focus and reflections reliably.

What should you look for when buying?

First check the mount, then measure the space around your photography table. Finally, choose the magnification and approach that suit the crop you need.

What to consider What should you check? Who is this most important for?
Mount and camera system Compare the mount on the specific lens version with your camera model, and check for any sensor-format limitations. I want a lens that fits my camera directly; around 31% of consumers therefore prioritise the right mount.
Working distance and table space Measure the space for your camera, the jewellery and the lighting. Sony Netherlands distinguishes the working distance in front of the lens from the minimum focusing distance, which is measured from the sensor. For very close focusing with the Z MC 50mm, Nikon Netherlands gives a distance of around 5 cm between the front of the lens and the subject. If my table is short on space, I need to be able to set up the camera without getting in the way of my lighting; around 25% of consumers put the practical setup first.
Magnification and crop Decide how small a detail you want to show, then compare the maximum reproduction ratio of the exact model. Canon gives 0.5× for the RF 35mm F1.8 and 1.4× for the RF 100mm F2.8L; Laowa Netherlands gives 2:1 for the 65mm f/2.8 2X version for Fujifilm X. For example, I want to fill the frame with a small setting and choose the magnification to suit; around 25% of consumers focus most on magnification for detail.
Sharpness and reflections Check that you can position the camera steadily and adjust the lighting. Nikon Netherlands describes focus stacking using different focus points, while MPB’s product photography guide discusses using a tripod for a stable composition. For repeatable product photos, I want to be able to carefully set up my composition and lighting; around 19% of consumers put this approach first.

Common buying mistakes

  • Assuming ‘macro’ automatically means 1:1

    Lenses with ‘macro’ in the name can have different maximum reproduction ratios. According to Canon, the RF 35mm F1.8 and RF 85mm F2 offer 0.5×, while the RF 100mm F2.8L reaches a maximum of 1.4×.

    Compare the stated reproduction ratio with the smallest crop you actually need.

    If the details don’t appear large enough at your chosen magnification, you may need a second lens.

  • Confusing minimum focusing distance with working distance

    Minimum focusing distance is measured from the image sensor; working distance is the space between the front of the lens and the subject. They are not interchangeable measurements.

    Try setting up your equipment on your own table and check whether there’s still room for lighting with the crop you want.

    You may need to adjust the position or angle of your lighting to make the setup work.

  • Choosing based only on maximum magnification

    High magnification makes small details larger on the sensor, but it doesn’t automatically solve limited depth of field.

    First decide whether you’re photographing the whole piece of jewellery or a single detail. Also check whether a stable setup and, if needed, focus stacking suit your workflow.

    Focus stacking may require extra shots and time to combine images taken at different focus points.

Brands to compare

These models are examples from specific product ranges and with specific camera mounts; they are not general assessments of the brands.

Nikon

The Z MC 50mm f/2.8 is a 1:1 macro option for Nikon Z; Nikon also offers longer macro lenses for Z cameras.

  • Nikon Netherlands states that the front of the Z MC 50mm can be around 5 cm from the subject when focusing very close.
  • Allow room for lighting at this short distance; the measurement applies to this specific lens.

Sony

For Sony E, options include the FE 50mm F2.8 Macro and the FE 90mm F2.8 Macro G OSS, both with a stated magnification of up to 1:1.

  • Sony Netherlands specifies a minimum focusing distance of 0.16 m for the 50mm and optical image stabilisation for the 90mm.
  • Minimum focusing distance is not the same as the clear space in front of the lens; stabilisation doesn’t replace planning for lighting and focus.

Canon

Canon RF options range from 0.5× close-ups with the RF 35mm F1.8 or RF 85mm F2 to a maximum of 1.4× with the RF 100mm F2.8L.

  • Canon lists reproduction ratios in the model specifications, making it easy to compare them with the crop you need.
  • You don’t automatically need higher magnification if you want to photograph the whole piece of jewellery; these figures are not an independent comparison of image quality.

Tamron

According to Tamron, the 90mm F/2.8 Di III MACRO VXD F072 is a 1:1 option, available in separate versions for Sony E and Nikon Z.

  • Tamron specifies a minimum focusing distance of 0.23 m.
  • Check the mount on the exact version and whether a longer shooting setup will fit behind your table.

Laowa

The 65mm f/2.8 2X Ultra-Macro is an APS-C option for Fujifilm X cameras, designed for capturing very small details at up to 2:1.

  • Laowa Netherlands lists 2:1 magnification and the Fujifilm X mount for this version.
  • Check the mount and sensor format of the model on offer; 2:1 isn’t necessarily needed for a photo of the entire piece of jewellery.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is a 1:1 option for Sony E and L-Mount cameras.

  • Sigma specifies a minimum focusing distance of 29,5 cm.
  • Check that a longer shooting setup will fit behind your table; minimum focusing distance doesn’t tell you how much space you’ll need overall.

Our pick at Joybuy

This is a Sony E lens for product photography and close-ups; check that its stated magnification suits the detail you want to photograph.

Sony E 50mm f/1.8 OSS Black

Sony E 50mm f/1.8 OSS Black

This lens can be used with Sony E cameras for product photography and close-ups; its stated magnification is 0.16×, so check whether that’s enough to show the detail you want.

The product information lists a weight of 202 g.

View at Joybuy

Frequently asked questions

Is a lens with ‘macro’ in its name always suitable for tiny jewellery details?

No, the maximum reproduction ratio varies by model. Canon lists 0.5× for the RF 35mm F1.8 and RF 85mm F2, compared with a maximum of 1.4× for the RF 100mm F2.8L. Choose based on the smallest crop you need.

How can I get a ring sharp from front to back?

Set up your camera securely and assess the depth of field at the magnification you want to use. If one shot doesn’t provide enough sharpness, you can take shots at different focus points and combine them using focus-stacking software. Nikon Netherlands describes this technique for macro photography.

Who can help if a lens I bought online as a private consumer turns out to be faulty?

For a consumer purchase, the Dutch government says the seller must provide a solution if the product isn’t working properly, so your claim is not solely against the manufacturer. The Netherlands has no set general statutory guarantee period: what you can expect depends, among other things, on the product and the information provided when you bought it. If you’re buying on behalf of a business, you should check the applicable contract terms separately.

Can I always return a lens bought online in the Netherlands within 14 days?

No. According to the Dutch government, the cooling-off period for distance purchases applies in many cases, but not to every online purchase. For example, it doesn’t apply to a purchase from a private individual. Before buying, check who the seller is and which terms apply to your order.