Photographers with an existing mirrorless camera
You’re looking for a lens that fits your camera, then comparing magnification, size and handling. Check the lens mount with the camera and lens manufacturers.
First, check that the lens mount is compatible with your camera, then decide whether you want to photograph the whole paperweight or focus on small details. Next, choose a working distance that leaves room for your lighting setup. A macro lens determines the possible framing and magnification, but reflections and a white background call for careful lighting. Focus stacking can help keep multiple layers in focus.
You’re looking for a lens that fits your camera, then comparing magnification, size and handling. Check the lens mount with the camera and lens manufacturers.
You want the whole glass object to remain recognisable, with enough room to light the white background, reflections and edges of the glass separately. Sony and broncolor explain how lens distance and lighting position play a part.
You want to show tiny inclusions or engravings, and are weighing magnification and sharpness across different depths against a shot of the whole paperweight. Canon and Laowa specify different maximum magnifications, while Nikon describes focus stacking for greater depth of field.
First, check the mount and the framing you want. Then compare the working space and maximum magnification of the exact lens version.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Mount and compatibility | Compare the camera model, lens mount and exact version. Also check separately whether any adapter you plan to use is compatible. | If I want to keep using my existing camera, the lens needs to fit it before I consider other features. Around 33% of consumers prioritise camera compatibility. |
| Working space for lighting | Look up the working distance for the exact model at the magnification you want. Allow for space for light modifiers and potential reflections. | Space around the subject is important if you want to light the glass and white background separately. Around 27% of consumers prioritise working space and lighting control. |
| Magnification for details | First decide which inclusions or engravings you want to show, then compare the lens’s maximum magnification. | If you want tiny details to fill the frame, maximum magnification may be a factor. You won’t necessarily need it for a photo of the whole paperweight. Around 20% of consumers prioritise detail magnification. |
| Depth of field and shooting method | Check whether you can focus accurately at different depths, and separately check whether your camera supports focus bracketing. | If you want several depth layers of a stationary object to appear sharp, you could consider taking a series of shots at different focus distances. Around 20% of consumers prioritise depth of field and shooting method. |
The distance at which a lens focuses is not the same as the clear space in front of the lens. Nikon gives around 5 cm between the front of the lens and the subject for the Z MC 50mm f/2.8 at its closest focusing distance; Sony lists a working distance of around 13 cm for the FE 90mm. These figures are specific to each model and are not directly comparable measurements.
The closest focusing distance is measured from the sensor, while working distance is measured from the front of the lens. Confusing the two can leave you with less room for your lighting setup than you expected.
Look up the working distance for the exact model at the magnification you plan to use.
When photographing glass, the position of the lights and the way the background is lit affect the visible reflections, transparency and edges of the glass.
Take test shots against your white background and adjust the lighting setup before choosing a different lens solely because of reflections.
Allow time for test shots and lighting adjustments. Depending on your setup, you may also need extra equipment.
A magnification such as 2:1 lets you capture tiny details, but photographing the whole paperweight calls for different framing.
First decide whether you want to photograph the whole object or a small inclusion, then compare the available magnification.
For the RF 100mm F2.8L Macro IS USM, Canon quotes up to 5 stops according to its testing standard, and 2 stops at 1.0× magnification. So the maximum figure does not necessarily apply to every macro shot.
Check the conditions for the exact model. If you’re photographing a stationary subject, consider using a stable setup and focus stacking too.
The RF 100mm F2.8L Macro IS USM is designed for a compatible Canon RF camera.
The NIKKOR Z MC 50mm f/2.8 and Z MC 105mm f/2.8 VR S are options for compatible Nikon Z cameras.
The FE 90mm F2.8 Macro G OSS is an option for a compatible Sony E camera.
The 105mm F2.8 DG DN MACRO | Art is available in Sony E and L-Mount versions.
The 90mm f/2.8 2x Ultra Macro APO is an option if you want greater magnification for very small details. Check the exact mount version.
Not necessarily. Match the framing you want to the size of the paperweight and your camera. The figures 1:1, 1.4× and 2:1 describe the maximum capabilities of specific lenses; you don’t have to shoot at maximum magnification every time.
Use test shots to assess the background and the glass separately, then adjust the lighting position. In a glass-photography setup described by broncolor, light positions affect visible reflections and transparency. For engraved glass, broncolor describes using more directional light to make the engraving stand out. The result depends on the subject and the setup.
For a stationary subject, you can focus at different depths and combine the images using software. Nikon describes this focus-stacking technique; check separately which controls or automation your camera supports.
According to ACM ConsuWijzer, online consumer purchases generally come with a statutory cooling-off period of up to 14 days after delivery, with some exceptions. You also have statutory rights if a product used normally doesn’t meet what you could reasonably expect. In the Netherlands, there is no single fixed statutory guarantee period that applies to every lens.