Who is this choice relevant to?

Holiday photographer with an existing camera

Wants to choose a lens that fits their camera, then considers the desired angle of view and magnification. Check the exact mount of the lens version before you order.

Walker photographing ferns up close

Carries a camera and lens and wants enough room on location to frame the frond and let light fall on it. Working distance may matter more than the minimum focusing distance.

Photographer looking to capture the texture of leaves

Wants to show veins and small details at a large scale. Compare the magnification ratio of the exact lens, as the shallow depth of field at high magnifications calls for extra care when focusing.

What should you consider when choosing?

Compact macro lens around 50–60 mm

A good fit if: You want to take one lens for fern fronds and more general holiday photos, and can get close to the frond. Nikon lists 1:1 magnification for the Z MC 50mm; OM SYSTEM lists 1.0× for the M.Zuiko 60mm on Micro Four Thirds.

Keep in mind: Working close to your subject can limit the room you have to position yourself. For the Z MC 50mm, Nikon specifies around 5 cm between the front of the lens and the subject at the minimum focusing distance.

Macro lens around 90–105 mm

A good fit if: You want to isolate a single frond or fine details and are looking for a different angle of view. Compatible versions are available for Canon RF, Nikon Z, Sony E and Sigma L mounts, among others.

Keep in mind: Lens versions aren’t interchangeable between camera mounts. Also check the working distance at the magnification you want to use.

A wider composition instead of maximum magnification

A good fit if: You mainly want to show the shape of an entire fern frond, with some of its surroundings. Decide on your preferred composition before choosing a lens based on its maximum magnification.

Keep in mind: High maximum magnification isn’t essential for every composition. At high magnifications, the shallow depth of field becomes an important consideration.

What to consider What should you look for? Who should consider this?
Camera mount Check the mount on your camera model and the exact lens version; also see whether you need an adapter. I want to make sure the lens fits my existing camera first. Around 33% of consumers who prioritise compatibility say it is their main consideration.
Working distance Compare the clear space in front of the lens at your desired magnification, not just the minimum focusing distance measured from the sensor. If a fern frond is surrounded by other plants, I want enough room to adjust my position and the light. Around 27% of consumers whose main need is room to position themselves prioritise this.
Weight and use Compare the weight of the exact version and consider whether you’ll also want to use the lens for other holiday photos. I want to keep my load light on a walk and may use my lens for more than macro photography. Around 20% of consumers who prioritise lightweight, versatile kit say this is their main consideration.
Magnification Check the reproduction ratio of the exact model and whether any equivalent magnification uses the same measurement basis. For tiny veins, I want to know how large the subject will appear on the sensor. Around 20% of consumers who prioritise magnification want to capture fine leaf details at a large scale.

Common pitfalls

  • Choosing based only on the word ‘macro’ or maximum magnification

    An entire fern frond and a tiny vein call for different compositions. Also, magnification on the sensor may mean something different from a full-frame equivalent figure.

    Compare reproduction ratios on the same basis and decide first which part of the frond you want to photograph.

  • Confusing minimum focusing distance with working distance

    Focusing distance is measured from the sensor. Nikon lists a minimum focusing distance of 0.16 m for the Z MC 50mm, with around 5 cm between the front of the lens and the subject.

    Before deciding whether you can photograph between other plants, check the working distance at the magnification you want to use.

  • Assuming stabilisation or splash protection covers every outdoor condition

    Stabilisation specifications can depend on the magnification. Sigma states that the splash-resistant construction of its 105mm lens doesn’t mean it’s waterproof.

    Read the conditions for the exact model and consider rain and moving fronds separately.

Brands and macro lens options

Canon

The RF 100mm F2.8L Macro IS USM is an option for owners of a compatible Canon RF camera who want high magnification for detailed shots.

  • Canon lists a maximum magnification of 1.4× and a minimum focusing distance of 0.26 m.
  • Canon notes that stabilisation performance at 1.0× magnification differs from its general maximum rating. Compare figures only when the corresponding test conditions are the same.

Nikon

The Z MC 50mm f/2.8 and Z MC 105mm f/2.8 VR S are options for Nikon Z cameras, with different focal lengths.

  • Nikon lists 1:1 magnification for both lenses. For the 50mm, Nikon specifies around 5 cm between the front of the lens and the subject at the minimum focusing distance; the 105mm has built-in VR and sealing, according to Nikon.
  • The approximately 5 cm of clear space in front of the 50mm may be a deciding factor when you’re working close to a fern frond.

Sony

The FE 90 mm F2.8 Macro G OSS is a 1:1 option for a compatible Sony E camera.

  • Sony lists optical stabilisation and a weight of 602 g.
  • The stated minimum focusing distance of 0.28 m is measured from the sensor, so it isn’t the same as the clear space in front of the lens.

Sigma

The 105mm F2.8 DG DN MACRO | Art is available in separate versions for Sony E and L mounts.

  • Sigma lists 1:1 magnification and a weight of 710 g for Sony E and 715 g for L mount.
  • Sigma describes the construction as splash-resistant and suitable for use in light rain, but not waterproof.

OM SYSTEM

The M.Zuiko Digital ED 60mm F2.8 Macro is an option for a compatible Micro Four Thirds system.

  • OM SYSTEM lists 1.0× reproduction on Micro Four Thirds and 2.0× as a full-frame equivalent. These are different measurements.
  • Don’t compare the stated equivalent magnification directly with a reproduction ratio measured on the sensor.

Joybuy products for close-up photography

A Joybuy product selection for close-up photography of fern fronds.

Sony E 50mm f/1.8 OSS Black

Sony E 50mm f/1.8 OSS Black

The product description mentions close-up and macro photography; check whether the magnification is sufficient if your main aim is to capture fine veins at a large scale.

Focal length: 50 mm.

View at Joybuy

Frequently asked questions

Do you need 1:1 magnification to photograph an entire fern frond?

No, 1:1 isn’t necessary for a photo of an entire fern frond. This ratio describes an image reproduced at life size on the sensor and is most relevant when you want to capture small details at a large scale. Choose your composition first.

Why doesn’t a minimum focusing distance of 0.16 m mean there’s 16 cm of space in front of the lens?

Because the focusing distance is measured from the sensor. Nikon lists a minimum focusing distance of 0.16 m for the Z MC 50mm, but there’s only around 5 cm between the front of the lens and the subject.

How can I get more of a fern frond in focus?

At very close shooting distances, the depth of field is shallow. Check your focus point and aperture; focus stacking can bring more of the subject into focus with a suitable camera system and a sufficiently still subject.

What are my rights when buying a macro lens online?

For online purchases by consumers in the Netherlands, you generally have a 14-day cooling-off period after delivery, subject to legal exceptions. ACM ConsuWijzer also states that statutory guarantees apply alongside any seller’s guarantee.

Can I leave the paths to take a photo or move a fern?

Check the rules for the nature reserve you’re visiting, and don’t assume the same permissions apply everywhere. The Dutch government states that provinces decide what is and isn’t allowed locally. Also respect the protection of habitats and species, and avoid causing damage.