Who is this guide for?

Photographers with an existing camera

You’re looking for a macro lens for your current camera. First, check the exact mount: Nikon, Sony, OM SYSTEM and Tamron make versions for different camera systems.

Fans of photographing entire fern fronds

You want to capture the shape of the leaf, perhaps with some of the garden in the frame too, rather than automatically opting for the highest possible magnification. Nikon explains how a little extra distance can help you include the surroundings in an outdoor shot.

Photographers seeking fine leaf detail

You may want to capture individual leaflets or veins in close-up. In that case, it’s worth considering magnification alongside the available clearance in front of the lens. As OM SYSTEM explains, the plane of focus can be very narrow in macro photography.

What should you look for when choosing?

Start with your camera’s mount, then choose the magnification and angle of view that suit how you want to frame the fern.

What to consider What should you check? Who is this important for?
Compatibility with your camera Compare the exact lens mount with the one on your camera body; don’t rely on the brand name alone. I want to make sure the lens fits my current camera before looking at its macro features. Around 33% of consumers put compatibility with their camera first.
Framing the whole fern frond Compare the angle of view and check both the minimum focusing distance and the working distance. If I want to show the shape of the whole fern frond and a little of the garden, a wider composition matters more than maximum magnification. Around 27% of consumers prioritise this kind of framing.
Magnifying fine details Compare maximum magnification on the same basis, and distinguish the focusing distance from the working distance in front of the lens. For veins or small leaflets, I want to capture enough detail without having to hold the lens right up against the leaf. Around 20% of consumers prioritise magnifying these details.
Focusing outdoors Check the focusing controls and any lens stabilisation; also see whether your camera body supports focus bracketing. When I’m photographing outdoors, I want to be able to keep the image sharp when the camera and leaf move. Around 20% of consumers prioritise easy-to-manage focusing for outdoor shots.

Common pitfalls

  • Confusing minimum focusing distance with the clearance in front of the lens

    Minimum focusing distance is measured from the image sensor, while working distance describes the space between the subject and the front of the lens. Nikon gives approximately 5 cm of clearance in front of the NIKKOR Z MC 50mm f/2.8 at its closest focusing setting.

    Check the working distance for the exact model and consider whether you’ll have enough room for the lens and light among the fern leaves.

  • Comparing a 35mm-equivalent magnification figure directly with a reproduction ratio

    OM SYSTEM gives both 2× reproduction and 4× in 35mm-equivalent terms for its 90mm lens. These figures use different measurement bases; they aren’t two directly comparable reproduction ratios.

    Compare reproduction ratios on the same basis, and also consider the crop you want to achieve with your camera.

  • Assuming stabilisation can keep a moving subject still

    A tripod or lens stabilisation can reduce camera shake, but it won’t stop a fern leaf moving in the wind. With focus stacking, the subject also needs to stay still enough throughout the series of shots.

    If possible, choose a calm moment and check the focus on the leaf itself. Use focus stacking only if you can keep the series of shots consistent enough.

Brands to consider for macro lenses

Nikon

For compatible Z cameras, Nikon offers a 50mm and a 105mm macro lens, giving you the option of considering a wider angle of view or tighter framing respectively.

  • Nikon specifies 1:1 magnification for both models. For the MC 50mm, Nikon gives approximately 5 cm of clearance in front of the lens at the closest focusing distance; the MC 105mm has built-in VR.
  • That working distance applies specifically to the MC 50mm. VR won’t keep a moving fern leaf still, and Z-mount versions aren’t a general recommendation for other mounts.

Canon

The RF 100mm F2.8L Macro IS USM is worth considering if you have a compatible Canon RF camera and are looking for high magnification.

  • Canon specifies up to 1.4× magnification and optical stabilisation for this model.
  • Canon gives a lower stabilisation figure at 1.0× than the general maximum, under its own test conditions. The 100mm angle of view isn’t necessarily the most convenient choice for framing an entire fern frond.

Sony

The FE 90mm F2.8 Macro G OSS is an E-mount option to consider if you want to compare 1:1 magnification with the working distance of this specific model.

  • Sony specifies 1.0× magnification and Optical SteadyShot. Sony gives a working distance of approximately 13 cm for this model.
  • The stated working distance doesn’t automatically apply to other Sony lenses. OSS won’t keep a moving leaf still.

OM SYSTEM

The M.Zuiko Digital ED 90mm F3.5 Macro IS PRO is an option for photographers with a compatible OM SYSTEM set-up who are looking for more than 1:1 magnification.

  • OM SYSTEM specifies 2× reproduction, stabilisation and IP53 sealing. The brand also gives 4× as the 35mm-equivalent figure.
  • The 4× figure isn’t a reproduction ratio on the same basis as 2×. An IP53 rating doesn’t mean that every camera and lens combination is fully protected against water in all conditions.

Tamron

The 90mm F/2.8 Di III MACRO VXD is a 1:1 option that Tamron describes in versions for Sony E and Nikon Z mounts.

  • Tamron specifies 1:1 magnification and a minimum focusing distance of 0.23 m for this model.
  • Minimum focusing distance isn’t the same as the working distance in front of the lens. Also check which mount is compatible with your camera and how much room you’ll have around the fern.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need 1:1 magnification to photograph an entire fern frond?

No, not necessarily. If the whole fern frond is your subject, choose the magnification based on the framing you want. Maximum magnification matters more for small details, but compare it with the working distance you need too.

What should I check before mounting a macro lens on my camera?

Check that the exact mount on the lens version is compatible with your camera body, and follow the mounting instructions for that combination. The Nikon, Sony, OM SYSTEM and Tamron examples include different mounts; a matching brand name alone doesn’t prove compatibility.

Will a tripod help if the fern is moving?

A tripod stabilises the camera, not the leaf. If it’s windy, wait for a calmer moment if possible; for focus stacking, the fern needs to stay still enough throughout the series of shots.