Photographers with an interchangeable-lens camera
You want to choose a lens that fits your camera and offers enough magnification, without accidentally ordering a version for a different camera system.
First, check that the lens mount is compatible with your camera, then decide whether you want to photograph the whole pin or focus on a small detail. A shorter macro lens can be useful for a wider composition. A lens of around 90–105 mm may leave more room for lighting, but could also require more space behind the camera. At high magnifications, lighting control and depth of field remain separate considerations.
You want to choose a lens that fits your camera and offers enough magnification, without accidentally ordering a version for a different camera system.
You photograph pins against a white background and need to consider detail, reflections and the position of the light together.
You want to magnify a small area of enamel or metal, while taking into account the available working space and depth of field.
Choose this if: you want some white space around the pin in the frame and the lens mount is compatible with your camera.
Keep in mind: the Canon RF 35mm F1.8 MACRO IS STM offers a maximum magnification of 0.5×; Fujifilm states that the XF30mmF2.8 R LM WR Macro achieves 1:1. The Fujifilm lens can come very close to the subject at its closest focusing distance.
Choose this if: you’re looking for a compatible version and need space around the pin for your lighting setup.
Keep in mind: a longer lens may need more space behind the camera. The minimum focusing distance is not the same as the working distance in front of the lens.
Choose this if: you want a small part of the pin to fill the frame; according to the manufacturer, the Laowa 65mm f/2.8 2x Ultra Macro APO achieves up to 2:1 on a compatible APS-C camera.
Keep in mind: such high magnification isn’t necessary for every photo of a whole pin. It also makes the available space for lighting and focusing more important.
Choose this if: your current lens already makes the whole pin large enough in the frame; first, take a test shot with a controlled white background and lighting.
Keep in mind: changing your lighting setup won’t increase your lens’s maximum magnification, and a macro lens won’t automatically solve problems with reflections or limited depth of field.
| Consideration | What should you check? | Who is this important to? |
|---|---|---|
| Mount and sensor size | Compare the mount of the exact lens version with your camera. Also check which sensor size the version is designed for. | I want to make sure the lens fits my camera before anything else, so I don’t choose a version I can’t use. Around 33% of consumers put compatibility first. |
| Framing and magnification | Decide whether you want the whole pin or a small detail in the frame. Compare the maximum magnification of the exact model: Canon specifies up to 0.5× for the RF 35mm F1.8 MACRO IS STM and 1.4× for the RF 100mm F2.8L Macro IS USM; Sony lists 1.0× for the FE 90mm F2.8 Macro G OSS, while Laowa specifies up to 2:1 for the 65mm f/2.8 2x Ultra Macro APO. | If I want to know whether the whole pin or a small detail will appear large enough in the frame, I look at the magnification needed for my chosen composition. Around 27% of consumers give framing and magnification top priority. |
| Room for lighting and focus | Assess the working space in front of the lens in your setup; the minimum focusing distance doesn’t tell you directly how much space you’ll have. Take a test shot with the background and lighting you plan to use. | I want to light the pin against white without the lens or lighting getting in the way of my setup. Around 27% of consumers put room for lighting and focus first. |
| Added value compared with your current lens | Compare a test shot from your current lens with the final composition you want. Weigh the magnification against other ways you plan to use the new lens. | If I mainly photograph whole pins, I want to find out whether my current lens is good enough before buying another one. Around 13% of consumers prioritise the added value over their current kit. |
According to Canon, the RF 35mm F1.8 MACRO IS STM offers a maximum magnification of 0.5×, while the RF 100mm F2.8L Macro IS USM reaches 1.4×. So the ‘macro’ label alone doesn’t tell you what you’ll be able to fit in the frame.
Compare the maximum magnification of the exact model with the composition you want, rather than relying on the category name alone.
If the first lens can’t capture the detail large enough, you may need to buy another one.
Fujifilm lists a minimum focusing distance of 10 cm for the XF30mmF2.8 R LM WR Macro and says that, at this distance, the subject almost touches the front of the lens. This distance doesn’t tell you how much room there’ll be between the lens and the pin.
Try the chosen distance with the pin, background and light source arranged as you intend to use them.
For close-ups, a single shot may not provide enough depth of field. A white background and the lighting also need to be set up separately.
Assess focus and lighting separately from maximum magnification. If one shot isn’t enough, taking a series at different focus positions may mean extra work during shooting and editing.
For Canon RF cameras, the RF 35mm F1.8 MACRO IS STM and RF 100mm F2.8L Macro IS USM are different options for close-up photography.
The Sony FE 90mm F2.8 Macro G OSS is a 1:1 macro lens for Sony E-mount cameras.
The Sigma 105mm F2.8 DG DN MACRO | Art is a 1:1 option, available in separate versions for Sony E and L-Mount.
The Fujifilm XF30mmF2.8 R LM WR Macro is a 1:1 option for the X system.
According to the manufacturer, the Laowa 65mm f/2.8 2x Ultra Macro APO is an option for high magnification on a compatible APS-C camera.
No, not always. First, decide on the composition you want and try your current lens. 1:1 or 2:1 is relevant if your lens can’t make the whole pin or the small detail you want large enough in the frame. Check the maximum magnification of the exact model.
If a single shot doesn’t provide enough depth of field, you can combine several shots taken at different focus positions. Keep the pin and camera in place throughout the series, and check beforehand which shooting and editing options are available to you.
For product photography, the background, lighting and composition all need to work together. Take a test shot to see whether your pin’s colours and outline remain clearly visible; a lens specification alone won’t tell you this.
According to the Dutch government, the seller must provide a solution if a product is faulty. There’s no fixed statutory guarantee period for all products in the Netherlands; what you can expect depends, among other things, on the product and the sales information. A manufacturer’s guarantee is in addition to your statutory rights.
According to the Dutch government, distance sales often come with a 14-day cooling-off period, but this doesn’t apply to every transaction. For example, an online purchase from a private individual doesn’t count as a distance sale in this sense. Check who the seller is and which terms apply.