Start by choosing a lens with the right mount, then decide whether you want to photograph the whole pin or a small detail. Next, compare the working distance at that magnification: limited space in front of the lens can make it harder to position a diffuser and light, while greater magnification does not increase depth of field. Reflections call for careful lighting, and raised details may require several shots taken at different focus points.
Who is this guide for?
Pin maker photographing reflective pieces
You photograph enamel and metal edges for product images and want room to soften artificial light and move reflections around. Nikon USA explains the use of diffused light in jewellery photography, while Sony Netherlands explains how working distance is measured.
Pin detail photographer
You want to show fine lines or relief on their own, and need to balance magnification against depth of field. Canon Europe explains focus stacking as a way to combine shots taken at different focus points; Canon Netherlands and Laowa provide model-specific magnification information.
Photographer using a single camera system
You’re looking for a macro lens that fits your camera mount and may also suit other subjects. Nikon Netherlands, Sigma and Fujifilm describe different mounts and lens versions.
What should you look for?
First, check your camera mount, then decide on the framing you want: the whole pin or a small detail. Next, assess the working distance and focusing options for your lighting setup.
The percentages show which purchase consideration matters most to consumers who photograph enamel pins under artificial light.
| What to consider |
What should you check? |
Who is this important for? |
| Room for lighting |
Compare the working distance from the front of the lens at your chosen magnification. Check whether there’s enough room for a light and diffuser. |
When photographing glossy enamel and metal edges, I want to position the diffuser without the lens getting in the way; around 29% of consumers prioritise having room to control the light. |
| Camera mount |
Check the exact camera model and the full mount version of the lens. |
I want to avoid choosing a lens that doesn’t fit my camera; around 29% of consumers prioritise camera compatibility. |
| Magnification and framing |
Decide how small a detail you want to show and compare the maximum reproduction ratio of the exact model. |
If I want to capture fine lines or relief on their own, I look for the magnification that suits that detail; around 24% of consumers prioritise detail magnification. |
| Sharpness throughout the depth |
Check whether your camera supports focus bracketing or whether you can take several shots at different focus points manually. |
I want relief and raised areas to be sharp at the same time; around 18% of consumers prioritise sharpness throughout the depth. |
Common pitfalls
-
Assuming ‘macro’ in the name means 1:1 magnification
A close-up lens doesn’t automatically offer a 1:1 reproduction ratio. Canon, for example, states that the RF 85mm F2 Macro IS STM does not offer life-size reproduction.
Compare the maximum reproduction ratio of the exact lens version with the framing you want to photograph.
-
Confusing the minimum focusing distance with the clear space in front of the lens
The minimum focusing distance is measured from the image sensor. It doesn’t tell you how much space there’ll be between the front of the lens and the pin for your lighting.
Check the working distance at your chosen magnification before positioning your light and diffuser. Sony Netherlands explains the difference between these two distances.
-
Choosing more magnification to solve reflections or limited depth of field
Higher magnification won’t control artificial light or make reflected light sources less visible. When shooting close up, only a limited part of a pin may be in focus at once.
First decide whether you want to show the whole pin or a detail. Adjust the lighting and, for relief, take shots at different focus points if needed.
-
Choosing a lens without checking the mount version
Some models are available with different mounts. Sigma lists separate L-Mount and Sony E-mount versions of the 105mm F2.8 DG DN MACRO | Art.
Check the full version against your exact camera model before choosing a lens.
Brands worth comparing
Sony
Sony describes macro lenses for its E-mount system, including models with 1:1 magnification or higher.
- Sony states that the FE 90mm F2.8 Macro G OSS offers a working distance of around 13 cm at its closest focusing distance.
- The FE 100mm F2.8 Macro GM OSS is a separate model with up to 1.4× magnification; don’t attribute this specification to the FE 90mm.
Nikon
Nikon offers Z-mount macro lenses with different focal lengths and 1:1 magnification.
- Nikon states that the Z MC 50mm f/2.8 has around 5 cm of space between the subject and the front of the lens at its closest setting.
- That distance applies to the 50mm. The Z MC 105mm f/2.8 VR S is a different model, so check its specifications separately.
Canon
According to Canon, the RF 100mm F2.8L Macro IS USM is an option for magnification of up to 1.4×.
- Canon lists a maximum magnification of 1.4× for this model.
- The stated minimum focusing distance of 0.26 m is measured from the sensor and isn’t the working distance. The RF 85mm F2 Macro IS STM does not offer 1:1 reproduction.
Sigma
Sigma lists a 1:1 reproduction ratio for the 105mm F2.8 DG DN MACRO | Art, with separate versions for Sony E-mount and L-Mount.
- The model specifications state 1:1.
- Choose the right mount for your camera; model specifications aren’t an independent comparison of image quality.
Laowa
Laowa describes the 90mm f/2.8 2x Ultra Macro APO as an option for shots up to 2:1.
- Its magnification is designed to capture very small details at a large size.
- Laowa offers several versions, including a separate MFT version. Check the mount; 2:1 isn’t necessarily what you need to photograph the whole pin.
Fujifilm
The FUJINON XF30mmF2.8 R LM WR Macro is a 1:1 macro lens for the Fujifilm X system.
- Fujifilm states a minimum focusing distance of 10 cm, measured from the sensor.
- Fujifilm explains that at the closest focusing distance, the subject almost touches the front of the lens. This can limit where you can position artificial lights.
Related products on Joybuy
Related products coming soon.
Frequently asked questions
Will a different macro lens help with white light spots on enamel?
Not by itself. When photographing small, shiny objects, it’s important to control the light source and reflections; Nikon USA describes using diffused light through a light tent for jewellery photography. Also change the shooting angle if the camera or photographer is visible in the surface.
Is the minimum focusing distance the same as the space I need for my light?
No. The minimum focusing distance is measured from the sensor; the working distance is the space between the subject and the front of the lens. Sony Netherlands makes this distinction explicit.
How can I get a pin with raised relief sharp from front to back?
If needed, take several shots at different focus points and combine them using focus stacking. Canon Europe describes this technique and recommends a sturdy setup to keep the images aligned. Check which focusing or bracketing features your camera offers.
What should I know when buying a lens online in the Netherlands?
For online distance purchases from a business in the Netherlands, you generally have a 14-day cooling-off period; exceptions and the exact circumstances of the purchase may matter. The Dutch government also states that the seller must provide a solution if a product is faulty. A manufacturer’s warranty does not replace your statutory rights.