Who is this guide for?

Pin maker who wants to show the details

If you photograph fine lines, texture and clasps as well as the whole pin, compare the maximum magnification and framing of lenses that fit your camera. Nikon Netherlands and Canon Netherlands list different magnification specifications for their macro lenses.

Online shop owner with a small photography table

If you need to position your camera, lens and lights around shiny pins, check how much room there is in front of the lens for the framing you want. Nikon Netherlands specifies around 5 cm between the front of the lens and the subject for the Z MC 50mm f/2.8 at its closest focusing distance. Sony Netherlands explains that minimum focusing distance is measured from the sensor.

Seller photographing lots of pins in a row

For a series of product photos, it helps to keep your camera, background and lighting in fixed positions. Canon Netherlands describes a tripod as a way to achieve consistent framing; Nikon Netherlands also recommends paying attention to light placement.

What should you look for when choosing?

First check that the lens mount is compatible with your camera. Then work out what magnification your framing requires, and make sure you’ll have enough space for your lighting and a repeatable set-up.

What to consider What should you check? Who is this important for?
Magnification and detail Check the maximum magnification of the exact model and compare test shots with your preferred framing and pin size. If I want to show fine lines and texture as well as the whole pin, I compare the framing with the size of the pin. Around 33% of consumers make detail their top priority.
Working space and lighting Compare the space in front of the lens for your preferred framing, then use test shots to assess how the light falls on the shiny pin. With shiny pins, I want room to move the lights and assess reflections. Around 27% of consumers give working space and lighting top priority.
Consistent photos Check that your camera can be kept steady and that you can reproduce the background, lighting and focus point between shots. When I photograph lots of pins in a row, I want to keep my camera, background and lights in the same positions. Around 20% of consumers prioritise consistency.
Mount and set-up Check the exact camera mount and see which tripod and lighting equipment you already have. I want to make sure the lens version fits my camera and see what I can already use for my set-up. Around 20% of consumers prioritise system compatibility and the complete set-up.

Common buying mistakes

  • Confusing minimum focusing distance with the clear space in front of the lens

    Minimum focusing distance isn’t always measured from the front of the lens. Sony Netherlands says it is measured from the sensor; for positioning your lights, what matters is the space between the lens and the pin.

    Check the working space for the framing you want and test whether your lighting set-up will fit.

    If your lighting set-up doesn’t fit the available working space, you may need to reposition your camera or lights.

  • Assuming every macro lens offers the same magnification

    Maximum magnification varies by model. Canon Netherlands lists a maximum of 0.5× for the RF 85mm F2 MACRO IS STM and 1.4× for the separate RF 100mm F2.8L MACRO IS USM.

    Compare the specification for the exact lens version with test shots of your pins and the details you want to show.

  • Replacing just the lens to make your photos more consistent

    A different lens won’t automatically keep your camera, background and lighting in the same positions. Canon Netherlands describes a tripod as a way to achieve consistent framing; Nikon Netherlands also highlights light placement and manual focusing.

    First take stock of the camera, tripod and lighting equipment you already have, and how you can keep it in place during a photo session.

    Depending on your existing set-up, you may need a stable camera support or additional lighting.

Relevant brands

Canon

For Canon RF cameras, these models offer different magnification options.

  • Canon Netherlands lists a maximum of 0.5× for the RF 85mm F2 MACRO IS STM and 1.4× for the RF 100mm F2.8L MACRO IS USM.
  • Compare the magnification with the framing you need; the higher maximum magnification isn’t automatically necessary for every pin photo.

Nikon

For Nikon Z, the options include 50mm and 105mm macro lenses.

  • Nikon Netherlands lists 1:1 magnification for both the Z MC 50mm f/2.8 and the Z MC 105mm f/2.8 VR S.
  • For the Z MC 50mm f/2.8, Nikon specifies around 5 cm between the front of the lens and the subject at its closest focusing distance. Check that there’s enough room for your lighting; this isn’t a general working distance for every setting.

Sony

The FE 90 mm F2.8 MACRO G OSS is a Sony E-mount lens with 1:1 magnification.

  • Sony Netherlands lists 1.0× magnification, optical stabilisation and a minimum focusing distance of 0.28 m.
  • Minimum focusing distance is measured from the sensor, so it isn’t the clear space in front of the lens.

Tamron

The 90mm F/2.8 Di III MACRO VXD is available in Sony E-mount and Nikon Z-mount versions.

  • Tamron lists 1:1 magnification and a minimum object distance of 0.23 m.
  • Check the exact mount. Minimum object distance isn’t the same as the clear space in front of the lens.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is available for Sony E-mount and L-mount cameras.

  • Sigma lists 1:1 magnification and a minimum focusing distance of 29.5 cm.
  • Check that the mount is compatible and that there’s enough practical space for your camera and lights; the stated distance isn’t a direct measurement of the working space available in your set-up.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Does every enamel pin need to be photographed at 1:1?

No, 1:1 isn’t necessary for every pin photo. It depends on the size of the pin and whether you want to show the whole pin or a small detail. Canon Netherlands lists a maximum of 0.5× for the RF 85mm F2 MACRO IS STM and 1.4× for the separate RF 100mm F2.8L MACRO IS USM; compare these figures with test shots of your subject.

How can you keep the framing consistent across a series of pin photos?

Keep your camera, background and lights in roughly the same positions. Canon Netherlands describes a tripod as a way to achieve consistent framing; Nikon Netherlands also mentions repositioning lights and manual focusing for macro photography.

Do you always have 14 days to change your mind when you buy a lens online for your online shop?

No, this doesn’t automatically apply to a business purchase. ACM ConsuWijzer says consumers generally have 14 days to change their mind for an applicable online consumer purchase, but also explains that anyone using an agreement mainly or exclusively for business isn’t covered by consumer protection. So check whether your purchase qualifies as a consumer purchase.

Are there Dutch rules about how you show a pin in your online shop?

Your product photos and description must not mislead consumers. The Netherlands Authority for Consumers and Markets lists incorrect or misunderstood information, and leaving out important information, as examples of unfair commercial practices. So make sure your photos and description together clearly show what the buyer will receive; there’s no requirement to use a particular lens or photographic setting.