Who is this guide for?

Photographers who want to capture stitch detail

If you want to capture individual stitches or fibres in close-up, work out the magnification you need by considering the smallest detail you want to show.

Photographers with a fixed lighting setup

If you use lights around an embroidery hoop, you’ll need working space in front of the lens and will want to minimise unwanted shadows while taking photos.

Embroidery makers with an existing camera

If you want to photograph both larger designs and fine details, first check which lens mount and version are compatible with your camera.

What should you look for?

What to consider What to look for Who should prioritise this?
Magnification for stitches Compare the maximum magnification of the exact lens version on a like-for-like basis, for example 1:1, 1.4× or 2× on the sensor. If I want to fill the frame with a single stitch or fibre, I prioritise the magnification needed to do that. Around 31% of consumers put stitch detail first.
Room for lights Check the working distance at the magnification you want and see whether your lights will fit around the embroidery hoop without casting distracting shadows. With a fixed lighting setup, I want to position my lights without the camera or lens casting a shadow over my work. Around 25% of consumers prioritise room for lighting and manageable shadows.
Sharpness across raised stitches Consider how you can focus precisely and whether your setup allows you to keep the camera fixed and, if needed, use focus stacking. If stitches at different heights need to be sharp, I want to focus on several points. Around 25% of consumers put depth of field first.
Mount and versatility Check the exact lens mount for your camera model and whether the angle of view works for both details and wider compositions. With a camera I already own, I want to choose a compatible lens version that can also be used for wider shots of embroidery. Around 19% of consumers prioritise system compatibility and versatility.

Common selection mistakes

  • Assuming every macro lens offers the same magnification

    The stated maximum magnification varies from lens to lens. The word ‘macro’ alone doesn’t tell you how large a stitch will appear on the sensor.

    Compare the maximum magnification of the exact lens version, using the same basis for each comparison.

  • Confusing minimum focusing distance with the clear space in front of the lens

    Getting close to the embroidery can make it harder to position lights or cause shadows. The stated focusing distance doesn’t tell you how much space there is in front of the lens.

    Check the working space at the magnification you want to use, and try positioning the lights around your own embroidery hoop.

  • Choosing a lens by focal length without checking the mount

    Macro lenses are made for different camera systems. Some models are also available in separate mount versions.

    Check your camera model and the full lens version before choosing.

  • Expecting a fast lens to sort out colour and sharpness by itself

    When shooting macro, shallow depth of field and artificial light can affect your photos, even if the lens has a wide maximum aperture.

    Keep the camera steady, set the white balance to suit the light you’re using and consider focus stacking if your stitches are at different heights.

Brands to consider

Canon

The RF 100mm F2.8L Macro IS USM is an option for a compatible Canon RF camera when you want to fill the frame with small stitches.

  • Canon specifies up to 1.4× magnification and a minimum focusing distance of 0.26 m.
  • That focusing distance doesn’t tell you how much room there is in front of the lens, so check that there’s space for your lighting.

Sony

The FE 90 mm F2.8 Macro G OSS, model SEL90M28G, offers 1:1 magnification for a compatible Sony E camera.

  • Sony specifies a minimum focusing distance of 0.28 m and Optical SteadyShot.
  • The focusing distance is measured from the camera and doesn’t tell you how much clear space there is in front of the lens. Also check how sharp your own setup is.

Fujifilm

According to Fujifilm, the FUJINON XF30mmF2.8 R LM WR Macro offers 1:1 magnification for a compatible Fujifilm X camera.

  • Fujifilm specifies a minimum focusing distance of 10 cm.
  • At high magnification, the short distance from the fabric can make it difficult to position lights beside your work.

OM System

The M.Zuiko Digital ED 90mm F3.5 Macro IS PRO is an option for a compatible Micro Four Thirds system if you want more than 1:1 magnification.

  • OM System specifies up to 2× magnification on the sensor and a minimum focusing distance of 0.224 m.
  • The 4× value also quoted is a 35 mm equivalent and uses a different basis for comparison. At high magnification, depth of field needs extra attention.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art offers 1:1 magnification in separate Sony E and L-Mount versions.

  • Sigma specifies a minimum focusing distance of 29,5 cm.
  • Choose the version that matches your camera’s mount.

Nikon

According to Nikon, the NIKKOR Z MC 50mm f/2.8 offers 1:1 macro for a compatible Nikon Z camera.

  • Nikon also describes the lens as suitable for everyday photography.
  • When shooting close-up, the front of the lens can be just a few centimetres from your subject, which may limit the space available for lighting beside the fabric.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need maximum macro magnification for every embroidery design?

No. First decide whether you want to photograph a whole design or a single small stitch. Manufacturers specify different maximum magnifications, so choose one that suits the framing you want and check that there’s enough room for your lighting setup.

How can I stop artificial light from changing the colour of the thread?

Set your camera’s white balance to match the light you’re using, then check a test photo of the thread. Canon explains that an unsuitable white balance under artificial light can, for example, create a yellow or green colour cast. The lens won’t correct this automatically.

How can I get raised stitches at different distances in focus?

Keep the camera steady, focus carefully and consider taking several shots with different focus points if one image doesn’t provide enough depth of field. Combining the shots requires an additional editing step.

What should I look out for when buying a lens online?

In the Netherlands, many online distance purchases from a business come with a 14-day cooling-off period. Check whether this applies to your purchase. If the lens is faulty, you have legal rights to an appropriate remedy, such as a free repair, replacement or refund. According to the Dutch Government, there is no fixed statutory warranty period.