Embroiderer with an existing camera
You’re looking for a lens that fits your camera mount, so you can check in advance whether the combination is suitable.
Start with your camera’s mount and the framing you want. You may need less magnification to capture a larger area of embroidery, while individual small stitches may call for more. Then check how much working room you’ll have in front of the lens at your chosen focusing distance. At close range, the lens can also block light, and it may be harder to keep stitches at different heights in focus at the same time.
You’re looking for a lens that fits your camera mount, so you can check in advance whether the combination is suitable.
You want to capture individual stitches in close-up, so you’re paying attention to the specific lens’s maximum magnification.
You need to position your camera, embroidery and lighting on or above a small table. The space in front of the lens and the depth of field may both be factors.
First check your camera mount, then decide how large you want the stitches to appear in the frame. Finally, adapt your table setup and focus requirements accordingly.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Camera mount | Check the exact camera model, mount and lens version. | I want to check first whether the lens fits my existing camera; this is a priority for around 33% of consumers who put compatibility first. |
| Magnification | Compare the exact model’s maximum magnification with the framing you want. | I want to capture small, individual stitches clearly; around 27% of consumers put magnification first for this type of detailed framing. |
| Space and light | Check how much clear space there is in front of the lens and where you can position the lighting. | I need to fit the camera and lighting on a small table; this is the main concern for around 20% of consumers. |
| Depth of field | Decide whether one stitch needs to be in focus or several raised stitches should appear sharp at the same time. | I want to capture texture and stitches at different heights; around 20% of consumers prioritise control over this depth of field. |
The stated focusing distance isn’t always measured from the front of the lens. For the Fujifilm XF30mmF2.8, Fujifilm specifies 10 cm from the sensor, while the distance from the front lens element is 1.2 cm at the closest focusing distance. This difference can affect where you position your lighting.
At your desired magnification, check the point from which the distance is measured. Sketch out in advance how the camera, fabric and lighting will fit on your table.
Maximum magnification varies by model. Canon lists a maximum of 0.5× for the RF 35mm F1.8 MACRO IS STM; that isn’t the same reproduction ratio as 1:1.
Choose based on the framing you want and check the maximum magnification of the exact lens version.
Depth of field can be limited in macro photography. Focus stacking requires multiple shots, and both your camera and subject need to be suitable for this technique.
First decide which part of the embroidery needs to be in focus. Then check whether your camera and setup support the aperture settings or focus stacking you need.
For compatible RF cameras, Canon offers, among other options, a 35mm lens with up to 0.5× magnification and a 100mm lens with up to 1.4×, according to the official model specifications.
The NIKKOR Z MC 50mm f/2.8 is a 1:1 option for compatible Nikon Z cameras. Nikon also lists overhead photography as one of its uses.
For compatible Sony E-mount cameras, Sony lists the FE 50mm F2.8 Macro and the FE 90mm F2.8 Macro G OSS; according to the official specifications, both offer a maximum magnification of 1:1.
The XF30mmF2.8 R LM WR Macro is a 1:1 option for compatible Fujifilm X cameras. Fujifilm lists tabletop photography as one of its uses.
According to Sigma, the Sigma 105mm F2.8 DG DN MACRO | Art is available in L-mount and Sony E-mount versions and offers up to 1:1 magnification.
No. Check the exact lens’s maximum magnification. Canon lists a maximum of 0.5× for the RF 35mm F1.8 MACRO IS STM, while Nikon specifies 1:1 for the Z MC 50mm f/2.8. The right magnification depends on the framing you want.
Keep the fabric still and try adjusting the depth of field using the aperture. If a single shot doesn’t show enough depth in focus, you can combine images taken at different focus points, provided your camera and technique support this. Focus stacking requires multiple shots and post-processing.
Check the point from which the manufacturer measures the distance and how much space there is in front of the lens. For the XF30mmF2.8, Fujifilm specifies 10 cm from the sensor, but only 1.2 cm from the front lens element at the closest focusing distance.
For eligible distance purchases, the Dutch government says you generally have a 14-day cooling-off period. According to its guidance, an online purchase from a private individual doesn’t count as a distance purchase. You’re also entitled to a product that meets the required standards. The Dutch government states that there is no fixed statutory guarantee period in the Netherlands, and that you should contact the seller if a product is faulty.