Which lens option is right for you?

Embroidery detail photographer

You want to show individual stitches or small imperfections, and choose the magnification to suit the crop you need.

Photographer working at a shared workbench

You need to fit your camera and lighting around other workstations. The space between the lens and the patch may therefore influence your choice.

Patch catalogue creator

You want to photograph whole patches and thread colours consistently, paying attention to framing, lighting and white balance.

What should you look for when choosing?

Compact close-up lens

Choose this option if: you mainly want to photograph the whole patch and your workbench setup.

Trade-off: maximum magnification varies by model; Canon specifies a maximum of 1:2 for the RF 35mm.

Macro lens with up to 1:1 magnification

Choose this option if: you want to make stitches appear larger in the frame and need space in front of the lens for your lighting.

Trade-off: working distances vary by model and are sometimes specified for a particular magnification; compare the figures for the crop you want.

Magnification greater than 1:1

Choose this option if: you want to show very small embroidery details individually and the lens is compatible with your camera.

Trade-off: higher magnification makes it less straightforward to frame a whole patch and doesn’t eliminate the shallow depth of field.

Start with the crop you want, then check the mount, and finally consider whether your camera and lighting will fit on your shared workbench. The percentages below show which of these purchasing priorities matters most to consumers.

What to consider What should you check? Who is this important for?
Magnifying individual stitches Compare the magnification of the exact lens version with the crop you want. Canon specifies a maximum of 1:2 for the RF 35mm; Sony quotes 1:1 for the FE 90mm, and Venus Optics specifies a maximum of 2:1 for the Laowa 65mm. If you want small stitches to fill the frame, detail magnification is the priority. Around 29% of consumers say this is the deciding factor.
Room for lighting Compare the working distance at your desired magnification. Nikon quotes around 5 cm in front of the Z MC 50mm at its closest focusing distance; Sony quotes around 13 cm for the FE 90mm, and Sigma quotes 141 mm for the 105mm at 1:1. These figures are for different models and shooting conditions. If you need to position lights around the patch, you’ll want enough clear space in front of the lens. Around 29% of consumers prioritise this working space.
Photographing the whole patch Test the framing with your own camera and check the white balance under your workshop lighting. White balance is a camera setting, not just a lens characteristic. For catalogue images, you’ll want to frame the whole patch consistently. Around 21% of consumers prioritise this wider shot.
Sharpness across the raised embroidery Check whether your camera and editing software support focus stacking, which combines images taken at different focus points. Nikon describes manual focus control for the Z MC 105mm. If you want raised and recessed stitches to appear sharp, getting detail in focus across the texture is the key consideration. Around 21% of consumers choose this as their priority.

What to watch out for when buying

  • Assuming ‘macro’ means a set magnification

    Maximum magnification varies from lens to lens. For example, Canon specifies a maximum of 1:2 for the RF 35mm, while other models mentioned offer 1:1 or more.

    Compare the reproduction ratio of the exact lens version with both the size of your stitches and the photo you want to take of the whole patch.

  • Confusing minimum focusing distance with space for a light

    The distance from the camera to the subject is not the same as the working space in front of the lens. Nikon quotes around 5 cm in front of the Z MC 50mm at its closest focusing distance.

    Check the working distance at the magnification you plan to use, and think about where your camera and lighting can go on the shared workbench.

  • Expecting a more powerful macro lens to keep all the texture in focus

    At high magnifications, parts of raised embroidery may fall outside the plane of focus. Nikon describes focus stacking as a way to combine images taken at different focus points.

    Check whether your setup can remain completely still and whether your camera and software can process separate images taken at different focus points.

Brands and macro lenses to consider

Canon

RF macro lenses for compatible EOS R cameras, including 35mm and 100mm models.

  • Canon specifies a maximum of 1:2 for the RF 35mm F1.8 MACRO IS STM and up to 1.4× for the RF 100mm F2.8L Macro IS USM.
  • The RF 35mm is therefore not a 1:1 lens; the 1.4× magnification specification applies to the RF 100mm mentioned here.

Nikon

Z macro lenses for compatible Nikon Z cameras, including the Z MC 50mm f/2.8 and Z MC 105mm f/2.8 VR S.

  • Nikon quotes 1:1 for both models; for the Z MC 105mm, the brand describes manual focus control.
  • Nikon quotes around 5 cm of space in front of the Z MC 50mm at its closest focusing distance, which may matter when positioning your lighting.

Sony

E-mount macro lenses for compatible Sony cameras, including the FE 90mm F2.8 Macro G OSS and FE 100mm F2.8 Macro GM OSS.

  • Sony specifies 1:1 for the FE 90mm and up to 1.4× for the separate FE 100mm model.
  • The quoted working distance of around 13 cm applies to the FE 90mm; manufacturers’ descriptions are not independent tests using embroidered patches.

Sigma

The 105mm F2.8 DG DN MACRO | Art is a 1:1 option available in separate Sony E-mount and L-Mount versions.

  • Sigma quotes a working distance of 141 mm at 1:1 for this model.
  • Check the exact mount; this model specification does not confirm compatibility with a different version.

Laowa

Venus Optics describes the 65mm f/2.8 2x Ultra Macro APO as an APS-C lens available in several mounts.

  • Venus Optics specifies up to 2:1 magnification and a minimum focusing distance of 17 cm.
  • The 17 cm figure is not a quoted working distance in front of the lens; check the exact version and the space available for your lighting setup.

Joybuy products

Related products coming soon.

Frequently asked questions

Will a macro lens from the same brand automatically fit my camera?

No. Check your camera model, the mount and the exact lens version. For example, Sigma lists separate Sony E-mount and L-Mount versions of the 105mm examined here; Venus Optics offers the Laowa 65mm examined here in several mounts.

How can I keep raised stitches and thread colours consistent in changing workshop light?

Keep the patch and camera still while you take a series of images at different focus points, and combine them only if you need greater depth of field. Also check the white balance under the lighting you’re using; focus stacking won’t correct colour differences by itself.

Do I always have 14 days to change my mind when buying online in the Netherlands?

For consumer purchases made online, the Netherlands Authority for Consumers and Markets’ Consumer Information service (ACM ConsuWijzer) generally states that the statutory cooling-off period ends 14 days after delivery, subject to exceptions. Check that you’re buying as a consumer: using a shared workshop doesn’t automatically make a business purchase a consumer purchase.

Is the statutory guarantee in the Netherlands exactly two years?

No. The Dutch government does not specify a fixed statutory guarantee period in the Netherlands. What you could reasonably expect from the product is what matters; if a product is faulty, contact the seller. These are consumer rights and do not necessarily apply to business purchases.