Who is this guide for?

Online retailer with a mirrorless camera

You’re looking for a lens for your existing camera and want to check the mount, sensor size and available space above your photography table before buying.

Maker of detailed patches

You want to show individual stitches and edges clearly, so you’re comparing magnification with the lens’s ability to keep the raised embroidery in focus.

Photographer of a regularly updated range

You want to light and frame your patches consistently every time. The space in front of the lens, a stable setup and the possibility of focus stacking all play a part in your workflow.

What should you look for when buying?

First, check that the lens fits your camera. Then compare the framing you need with the space available for lighting and the level of sharpness you want across the embroidery.

What to consider What to look for Who is this most relevant to?
Compatibility with your camera Check your camera model and the mount for the specific lens version. Take the sensor size into account too. If I’m looking for a lens for my existing camera, I first want to make sure the version is compatible with my system. Around 29% of consumers prioritise compatibility.
Stitches large enough in the frame Compare the maximum magnification of the exact model with the framing you need for your smallest detail. If I want to show individual stitches or fine edges clearly, the framing of my smallest detail matters. Around 24% of consumers prioritise stitch detail.
Room for lighting Compare the working distance from the front of the lens. The minimum focusing distance, measured from the sensor, is a different measurement. If I want to light my patch up close, I need to know how much space will be left in front of the lens. Around 18% of consumers prioritise room for lighting.
Sharpness across the raised embroidery Consider whether a single shot will keep the areas you want in focus, and whether your workflow allows for multiple focus points. When threads at different heights need to be sharp, I want to know whether one shot will be enough. Around 18% of consumers prioritise sharpness across the raised embroidery.
Your overall setup and workflow Consider the equipment you already have, and allow for any extra shots and editing involved in focus stacking. If I mainly photograph entire patches, I don’t want to choose lens features I’ll rarely use. Around 11% of consumers prioritise an efficient overall setup.

Common buying mistakes

  • Assuming every macro lens offers the same magnification

    The Canon RF 85mm F2 MACRO IS STM is rated at 0.5×, while the Canon RF 100mm F2.8L Macro IS USM offers up to 1.4×. Framing an entire patch calls for a different magnification from capturing an individual stitch.

    Compare the maximum reproduction ratio of the exact model with the smallest detail you want to photograph.

  • Confusing minimum focusing distance with the space available for lighting

    Minimum focusing distance is measured from the sensor, so it doesn’t tell you how much space there will be between the front of the lens and the patch. Nikon lists around 5 cm of working distance for the Z MC 50mm at its minimum focusing distance.

    Plan your lighting around the working distance at the magnification you’ll actually use. Your setup may need a different light position or more table space.

  • Expecting stabilisation to keep all the raised embroidery sharp

    Depth of field can be limited at high magnifications. Stabilisation therefore isn’t the same as keeping threads at different heights in focus.

    Keep your camera and patch steady, then check the sharpness across the raised embroidery. If a single plane of focus isn’t enough, you can combine shots taken at different focus points while the patch is still. This requires extra shots and editing.

Brands to compare

Canon

RF macro lenses for compatible EOS R cameras, with a range of maximum magnifications.

  • Canon specifies a maximum magnification of 1.4× for the RF 100mm F2.8L Macro IS USM.
  • Canon’s stated stabilisation of up to five stops applies under its own test conditions; at 1.0×, Canon specifies two stops. The RF 85mm F2 MACRO IS STM has a maximum magnification of 0.5×.

Nikon

Z MC macro lenses for compatible Nikon Z cameras, including a shorter 50mm and a 105mm.

  • Nikon specifies a 1:1 reproduction ratio for the Z MC 105mm and lists built-in VR.
  • Nikon lists around 5 cm of working distance in front of the Z MC 50mm at its minimum focusing distance, which may limit how you position lights close to the subject.

Sony

The FE 90mm F2.8 Macro G OSS is designed for compatible cameras with a Sony E-mount.

  • Sony specifies a maximum magnification of 1.0× and around 13 cm of working distance in front of the lens.
  • The stated working distance applies to this model and does not automatically apply to other Sony macro lenses.

Fujifilm

The XF80mmF2.8 R LM OIS WR Macro is a 1× macro lens for compatible Fujifilm X cameras.

  • Fujifilm lists internal focusing and optical stabilisation for this model.
  • Fujifilm lists a weight of around 750 g without caps or lens hood. Consider whether that suits your setup for overhead shots.

Sigma

The 105mm F2.8 DG DN MACRO | Art is available in separate Sony E-mount and L-Mount versions.

  • Sigma specifies a 1:1 magnification and a minimum focusing distance of 29,5 cm for this model.
  • Check the mount on the specific version for your camera. Sigma’s statements about image quality are not an independent comparison of patch photos.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need 1:1 magnification for every product photo?

No. Choose the magnification to suit the framing you need. Photographing an entire patch calls for different framing from capturing an individual stitch. Canon specifies a maximum of 0.5× for the RF 85mm and up to 1.4× for the RF 100mm.

How can I keep raised embroidery threads sharp?

Keep your camera and patch steady, then check the sharpness across the raised embroidery. If a single plane of focus isn’t enough, you can combine shots taken at different focus points while the patch is still. This requires editing.

Is the minimum focusing distance the space between the lens and the patch?

No. Minimum focusing distance is measured from the sensor and isn’t the same as the space in front of the lens. For the FE 90mm, Sony specifies a minimum focusing distance of 28 cm and a working distance of around 13 cm.

When buying online for my shop, am I automatically entitled to a 14-day cooling-off period?

Not automatically. ACM ConsuWijzer explains that consumers have a 14-day cooling-off period for online purchases, but also states that those who use an agreement mainly or exclusively for business purposes are not covered by consumer protection. Consider whether you’re making the purchase privately or for business.

Does every macro lens sold in the Netherlands need a CE mark?

This can’t be stated as a general requirement for every lens. According to the European Commission, CE marking is only required when applicable harmonised EU rules specify it for that product. Where no such requirements apply, the mark must not be used.