Who is this choice relevant to?

PCB documentation

You want to capture readable labels, connections and larger areas of a circuit board. Start with a lens that fits your existing camera and gives you the field of view you need.

Photographing tiny components

You want to show a small component large in the frame. Compare the actual reproduction ratio and consider how much room you’ll need to focus and light the component.

Photography at a busy workbench

You share your workspace with tools and other people. When choosing a lens, consider the clearance in front of it so you have room to light and photograph your subject.

What should you look for when buying?

First, check the camera mount and the exact lens version. Then choose the magnification you need for the smallest component and compare the working distance with the space required for lighting.

What to consider What should you check? Who is this important for?
Mount and camera Note the full camera model, mount and sensor format. Also check the exact version of the lens. If I want to keep using my existing camera, I first check that the lens version is compatible. Around 31% of consumers prioritise camera compatibility.
Magnification Compare the actual maximum magnification, such as 1:1, 1.4× or 2×, with the size of the smallest component you want to capture. If I want to show a very small component large in the frame, I check the reproduction ratio of the exact lens. Around 25% of consumers prioritise maximum detail magnification.
Working distance Check how much space there is between the front of the lens and the subject at your chosen magnification. This is not the same as the minimum focusing distance. At a busy workbench, I want enough room to position the lighting without the lens hitting the subject or tools. Around 19% of consumers prioritise clearance in front of the lens.
Sharpness at different heights Check whether your setup can accommodate multiple focus positions and whether your camera has the shooting function you need. If components at different heights need to remain legible, I want to know whether I can take and combine multiple focused shots. Around 13% of consumers prioritise sharpness across multiple heights.
Buying and using your equipment First, take a test shot with your existing camera and lens. Then work out which field of view or detail is still missing and what approach would suit your needs. If I don’t want to buy extra equipment or take on extra work before I know what’s needed, I test my current setup first. Around 12% of consumers prioritise limiting extra purchases and work.

Common buying mistakes

  • Choosing based only on ‘macro’ or focal length

    The mount and maximum magnification are separate specifications. Versions within the same lens range can differ.

    First, check your camera model and mount, then compare the maximum reproduction ratio of the exact lens version.

  • Confusing minimum focusing distance with working distance

    Minimum focusing distance is measured from the sensor plane; working distance is the space between the front of the lens and the subject.

    Compare the working distance at the magnification you intend to use, and allow for the space your lighting needs at the workbench.

  • Assuming more magnification will solve every focus problem

    Maximum magnification and depth of field are different properties. If components are at different heights, a single shot may not show everything in focus.

    Choose the magnification based on the smallest component. Separately, plan how to use multiple focus positions for a stable setup and possible focus stacking.

Brands to compare

Canon

The RF 100mm F2.8L Macro IS USM is designed for a compatible Canon RF camera when you need magnification beyond 1:1.

  • Canon specifies maximum magnification of 1.4× and autofocus for this model.
  • The stated minimum focusing distance of 0.26 m is not the distance from the front of the lens. RF lenses do not fit every Canon camera directly.

Sony

The FE 90 mm F2.8 Macro G OSS is an option for a compatible Sony E-mount camera if 1:1 magnification and its working distance suit your setup.

  • Sony states that the SEL90M28G has a working distance of around 13 cm at 1:1.
  • That distance applies to this model. Check whether you’ll still have enough room for your lighting.

Nikon

The NIKKOR Z MC 105mm f/2.8 VR S is designed for a compatible Nikon Z camera and life-size macro photography.

  • Nikon describes life-size shooting, built-in vibration reduction and the option of manual focusing.
  • These features do not mean that camera shake or limited depth of field will disappear in every workshop.

Sigma

The 105mm F2.8 DG DN MACRO | Art is available in a Sony E-mount or L-Mount version.

  • Sigma states that this model has a working distance of 141 mm at 1:1.
  • The stated distance applies at that magnification. Sigma’s claims about optical performance are manufacturer claims, not an independent comparison.

Laowa

The 100mm f/2.8 2X Ultra-Macro APO may suit you if a version is available for your camera and you’re happy to focus manually.

  • Laowa specifies 2× magnification and manual focusing for this lens range.
  • The mount and version can vary. Check the specific variant before attributing features to a model.

OM SYSTEM

The M.Zuiko Digital ED 90mm F3.5 Macro IS PRO is designed for a compatible Micro Four Thirds system if high magnification is important to you.

  • OM SYSTEM specifies 2× life-size magnification; 4× is the stated 35 mm equivalent.
  • The manufacturer links certain features to compatible camera bodies; these specifications are not an independent performance test.

Joybuy products

Related products coming soon.

Frequently asked questions

Is the minimum focusing distance the clear space between the lens and the circuit board?

No. Sony distinguishes between the distance from the sensor plane and the working distance from the front of the lens. For the SEL90M28G, Sony gives these as 28 cm and around 13 cm respectively. Check the specifications for the version you’re considering.

How can you get components at different heights in focus?

With a stationary setup, you can combine several shots taken at different focus points using focus stacking. Nikon describes this technique as merging images. Allow for the extra shots and processing, and check which shooting functions your camera body offers.

Can you try a lens bought online and return it?

For a consumer distance sale, you generally have a statutory cooling-off period of up to 14 days after delivery. ACM ConsuWijzer explains the exceptions and the rules for unpacking and trying out a product. Check those conditions and the seller’s information before you buy.

Who should you contact if a lens breaks down prematurely during normal use?

Under statutory warranty, the seller is responsible if the product does not meet what you could reasonably expect. ACM ConsuWijzer explains that the statutory period is not a fixed two years for every lens; any manufacturer’s warranty is separate from these rights.

Can you photograph colleagues or identifiable information and share the images?

That depends on the circumstances, the applicable privacy rules and workplace policies. The Dutch government states that organisations must comply with the GDPR when sharing personal data. Keep people and information that aren’t needed out of shot, and check the applicable policies and legal basis before sharing.