First, check that the lens mount and sensor size are compatible with your camera. Then choose a magnification suited to the size of your subject. A longer macro lens can leave more room for lighting, while a more compact lens may be practical for photographing a whole setup. Bear in mind that keeping components at different heights in focus may also require a steady setup and, potentially, focus stacking.
Who is this choice relevant to?
Photographer with an existing camera
You’re looking for a macro lens that fits your current camera body. So, check the mount and sensor size first. Sigma makes the 105mm version mentioned here for Sony E and L-Mount; Laowa describes the 65mm as an APS-C lens.
Photographer capturing PCB details
You want to frame small labels, contacts or solder joints individually. The stated maximum magnification helps you judge how large a detail can appear on the sensor. Canon, Sigma and Laowa list different maximum magnifications for their respective models.
Creator of repeatable product photos
You photograph components against a white background and want consistent framing, lighting and usable focus across different heights. Nikon describes focus stacking as a way to combine images taken at different focus points; Canon recommends using a tripod to keep the background and framing consistent.
What should you consider when choosing?
Start by checking that the lens is compatible with your camera. Then decide whether you mainly want to photograph a whole component, need more room for lighting or want to show very small details at greater magnification.
Compact macro around 50 mm
A good choice if: you have a compatible Nikon Z camera and want one lens for both components and close-ups; Nikon specifies a 1:1 reproduction ratio for the Z MC 50mm f/2.8.
Bear in mind: at maximum magnification, the lens gets close to your subject, which can leave less room for lighting.
Telephoto macro around 90–105 mm
A good choice if: you want to leave room for lights or reflectors and have a compatible mount. Sigma lists a working distance of 141 mm without the lens hood for the 105mm F2.8 DG DN MACRO at its minimum focusing distance.
Bear in mind: for a wider frame, you may need to position the camera further from the component; Sigma lists a working distance of 84 mm with the lens hood at that minimum focusing distance.
Magnification greater than 1:1
A good choice if: you want a very small label or solder detail to appear larger on the sensor. Canon specifies a maximum of 1.4× for the RF 100mm F2.8L; Laowa specifies a maximum of 2× for the 65mm f/2.8 APS-C lens.
Bear in mind: check the mount and consider how much working space you have; Laowa’s stated minimum focusing distance of 17 cm is not the same as the clear space in front of the lens.
| What to consider |
What to check before buying |
Who is this important for? |
| Mount and sensor size |
Compare the exact lens version with the mount and sensor size of your camera body. Sigma sells the 105mm version mentioned here separately for Sony E and L-Mount; Laowa describes the 65mm as an APS-C lens. |
If I’m looking for a lens for my existing camera, I want to make sure the version is compatible first. Around 29% of consumers make compatibility their top priority. |
| Magnification for detail |
Compare the maximum magnification of the exact model: Sigma lists 1:1, Canon up to 1.4× and Laowa up to 2× for the respective models. |
When I want to capture small labels or connections in detail, magnification is what I focus on most. Around 29% of consumers prioritise showing small details. |
| Room for lighting |
Check the working distance in front of the lens at the magnification you want, with the accessories you use. For the 105mm at its minimum focusing distance, Sigma lists 141 mm without the lens hood and 84 mm with it. |
If lights or reflectors need to be close to the component, I want to know how much room is left in front of the lens. Around 24% of consumers prioritise space for lighting. |
| Consistent focus and a white background |
Check whether your camera and software support a workflow using different focus points. Also plan to use a tripod and light the white background evenly. |
When I photograph components of different heights against white repeatedly, I want consistent framing and suitable focus. Around 18% of consumers give this kind of consistent studio photography top priority. |
Common pitfalls
-
Choosing a focal length without checking the mount
The Sigma 105mm version for Sony E is not the same as the L-Mount version. According to the manufacturer, Laowa offers the 65mm for several different mounts.
Before buying, compare the exact lens version and sensor size with your camera model.
-
Confusing minimum focusing distance with the space in front of the lens
Minimum focusing distance and working distance in front of the lens are different measurements. Using a lens hood can also change the stated working distance.
Check the working distance at the magnification you want to use and with the accessories in your setup.
-
Expecting greater magnification to keep the whole component in focus
For components with different heights, a single plane of focus may not be enough. Nikon describes focus stacking as combining images taken at different focus points.
Decide whether you want one detail or several planes in focus, and check which options your camera and software support.
Setting up a tripod and combining images take extra time.
Brands to compare
Canon
The RF 100mm F2.8L Macro IS USM is an option for a compatible Canon RF camera if you’re looking for magnification greater than 1:1.
- Canon specifies a maximum magnification of 1.4×.
- Canon lists a minimum focusing distance of 0.26 m; this is not necessarily the clear space in front of the lens.
Nikon
The Z MC 50mm f/2.8 offers a compact 1:1 option for a compatible Nikon Z camera; the Z MC 105mm f/2.8 VR S is a longer 1:1 option.
- Nikon lists 1:1 magnification for both models mentioned; for the 105mm, Nikon also specifies vibration reduction.
- When shooting at life-size magnification with the 50mm, the lens gets close to your subject. Check how much room each model leaves for your lighting setup.
Sigma
The 105mm F2.8 DG DN MACRO | Art is available in separate versions for Sony E and L-Mount.
- Sigma specifies 1:1 magnification and a working distance of 141 mm at minimum focusing distance without the lens hood.
- With the lens hood, Sigma lists a working distance of 84 mm at that minimum focusing distance. These are manufacturer specifications, not the results of an independent practical test.
Laowa
The 65mm f/2.8 2x Ultra Macro APO is an APS-C option for anyone who wants to capture very small details at greater magnification.
- Laowa specifies a maximum magnification of 2× and a minimum focusing distance of 17 cm.
- The minimum focusing distance is not the same as a stated clear working distance in front of the lens. Check the exact mount too.
Sony
The FE 90mm F2.8 Macro G OSS is a 1:1 option for Sony E; the FE 100mm F2.8 Macro GM OSS is a separate model with a stated magnification of 1.4×.
- Sony Netherlands specifies 1.0× magnification and a minimum focusing distance of 0.28 m for the FE 90mm.
- The 1.4× specification applies to the FE 100mm F2.8 Macro GM OSS, not the FE 90mm.
Joybuy products
Related products coming soon.
Frequently asked questions
Is the minimum focusing distance the same as the space for a light in front of the lens?
No. Minimum focusing distance and working distance in front of the lens are different measurements. For the 105mm at its minimum focusing distance, Sigma lists a working distance of 141 mm without the lens hood and 84 mm with it.
How can I keep both a tall capacitor and the circuit board in focus?
If the areas you want to show aren’t all in focus at once, you can use a stable setup to take images at different focus points, then combine them with suitable software. Check in advance which options your camera and software support.
What helps create a consistent white background?
A tripod helps keep the framing consistent across product photos. Canon also suggests using a white background and a light tent for product photography; the lens itself does not control the lighting.
What warranty and returns rights apply to online purchases in the Netherlands?
For online purchases by consumers, there is generally a statutory 14-day cooling-off period starting the day after delivery, subject to legal exceptions; Business.gov.nl explains this period. Consumers are also entitled to a product that meets the required standards. The same consumer rules do not automatically apply to business purchases. Before returning an item, check the applicable terms and any delivery costs.