Who is this buying guide for?

Photographers with an existing camera

You want to photograph electronic components without first buying a different camera system. The mount and exact lens version determine which lenses will fit your camera.

Photographers capturing PCB details

You want to capture small labels, solder joints or individual components in close-up. Magnification and your focusing method are therefore important factors in your choice.

Photographers with a tabletop studio

You take repeatable shots against a dark background and need room for lighting and support. If you need several focus distances, you may also need to take a series of shots.

What should you consider when choosing?

Start with your camera’s mount, then work out how much magnification the detail needs and check that you can light the subject properly.

Factor to consider What should you check? Who is this important for?
Mount and version Check your camera model, mount, sensor size and the exact version of the lens. If you want to use your current camera, make sure the lens version is compatible. Around 29% of consumers make compatibility their top priority.
Magnification of details Decide which detail should fill the frame and compare the exact lens’s maximum reproduction ratio. If you want to capture a small marking or solder joint in close-up, the reproduction ratio is a key consideration. Around 24% of consumers give detail magnification top priority.
Room for lighting Check the clearance between the front of the lens and the subject at your intended shooting setting; the minimum focus distance alone won’t tell you this. If you want to position lights around a component without blocking them, you’ll need enough working room. Around 18% of consumers consider this first.
Sharpness at different depths Check whether your camera and editing software support focus bracketing and merging images. If you want components at different distances to appear sharp at the same time, a series of focus-bracketed shots may suit your workflow. Around 18% of consumers start by considering depth of field.
Cost of the setup Compare everything you’ll need for your chosen lens and shooting method, such as additional lighting or support. If you need a suitable setup as well as the lens, it’s useful to know in advance what that involves. Around 11% of consumers make the cost of the complete setup their top priority.

Common mistakes when choosing

  • Choosing based only on ‘macro’ or focal length

    Maximum magnification tells you how large a detail can appear on the sensor. The distance between the front of the lens and the subject cannot be worked out from the focal length alone.

    Compare both the maximum magnification and the clearance in front of the lens at the setting you need for your shot.

  • Confusing equivalent magnification with 2:1 on the sensor

    OM SYSTEM lists a reproduction ratio of 1:1 for the M.Zuiko Digital ED 60mm F2.8 Macro, as well as 2× as its 35mm equivalent. These figures do not mean the same thing.

    When comparing lenses for different sensor formats, consider the actual maximum reproduction ratio and the framing you want separately.

  • Expecting stabilisation to solve lighting and sharpness problems

    Stabilisation is no substitute for lighting the subject and won’t automatically overcome limited depth of field. For the RF 100mm F2.8L Macro IS USM at 1.0×, Canon quotes a lower stabilisation rating than its general maximum.

    First choose a workable lighting and focusing method. Then assess stabilisation as a separate feature.

Brands to consider

Canon

The RF 100mm F2.8L Macro IS USM is designed for a compatible Canon RF system and for those who need magnification beyond 1:1.

  • Canon quotes a maximum magnification of 1.4× and a minimum focus distance of 0.26 m for this model.
  • The stated stabilisation benefit depends on shooting conditions; at 1.0×, Canon says it is lower than the general maximum.

Nikon

The Z MC 50mm f/2.8 and Z MC 105mm f/2.8 VR S are options for a compatible Nikon Z system: the former for a compact 1:1 setup, and the latter for 1:1 magnification at a longer focal length.

  • For the 50mm lens, Nikon gives a clearance of around 5 cm between the front of the lens and the subject at the closest setting. For the 105mm, Nikon lists manual focusing and vibration reduction.
  • The limited clearance in front of the 50mm lens can affect where you position your lighting. Check the clearance for your chosen lens and shooting setting.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is available in separate versions with a Sony E mount and an L mount.

  • Sigma quotes a reproduction ratio of 1:1 and a minimum focus distance of 29.5 cm for this model.
  • The minimum focus distance is not the same as the clearance in front of the lens. Check that you choose the right mount and have enough room for your lighting.

Laowa

The 100mm f/2.8 2x Ultra Macro APO is an option if you want 2:1 magnification and manual macro controls in a compatible version.

  • Laowa quotes a maximum magnification of 2:1 for this model.
  • According to Laowa, only the Canon EF versions have a CPU chip and motor for camera-controlled aperture adjustment; the other listed mounts are operated manually.

OM SYSTEM

The M.Zuiko Digital ED 60mm F2.8 Macro is designed for Micro Four Thirds users looking for a compact 1:1 macro lens.

  • OM SYSTEM quotes a maximum reproduction ratio of 1:1 and a minimum focus distance of 0.19 m.
  • The stated 2× figure is a 35mm equivalent, not a 2:1 reproduction ratio on the sensor.

Joybuy products

Related products will be available soon.

Frequently asked questions

Is a dark background enough to make small components visible?

No. Light the component separately and watch out for reflections from shiny surfaces. The clearance in front of the lens also affects where you can position the light.

Can you photograph components at different depths in focus at the same time?

With a static setup, you can focus at different distances and combine the images using focus stacking. Check which steps your camera and editing workflow support.

Is the minimum focus distance the same as the space available for a light in front of the lens?

No. Nikon quotes a minimum focus distance of 0.16 m for the Z MC 50mm f/2.8, with around 5 cm between the front of the lens and the subject at the closest setting. Check the clearance for the exact lens and shooting setting.

What warranty applies if you buy a faulty lens in the Netherlands?

When you buy as a consumer, you’re entitled to expect a product that works properly, and the seller is your point of contact if something goes wrong. The Dutch government explains that there is no fixed statutory warranty period for all products in the Netherlands; what you can expect depends on the circumstances.

Can you return a lens bought online in the Netherlands within 14 days?

For a standard online consumer purchase, you’ll generally have a statutory cooling-off period of up to 14 days after delivery. ACM ConsuWijzer advises checking for any applicable exceptions and return conditions. This right is separate from your rights if the product is faulty.